RFC1289-phivMIB :: phivControlDyingBase

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RFC1289-phivMIB › phivControlDyingBase

phivControlDyingBase

Module: RFC1289-phivMIB

OID (symbolic): RFC1289-phivMIB::phivControlDyingBase

OID (numeric): 1.3.6.1.2.1.18.8.5.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This value represents the base priority to which a tributary is reset each time it has been polled. A separate base can be set for each of the indicated polling states. Base is a decimal integer in the range 0-255. If not set, the defaults are: active, 255; inactive, 0; and dying, 0.

What is phivControlDyingBase?

This sets the base polling priority a tributary is reset to each time it's polled, with separate defaults per state (active 255, inactive 0, dying 0) if unset. Admins tune this together with phivControlDyingIncrement to control how the polling algorithm favors active tributaries over quiet ones.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.8.5.1.5
snmpwalk -v2c -c public <target> RFC1289-phivMIB::phivControlDyingBase

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.18.8.5.1.5.1
snmpget -v2c -c public <target> RFC1289-phivMIB::phivControlDyingBase.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.18.8.5.1.5.1 i <value>

Start monitoring DECnet Phase IV network nodes with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1289-phivMIB::phivControlDyingBase OID value, configure state conditions and alerts, and monitor any DECnet Phase IV network nodes from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.18phivDECnet-iv
1.3.6.1.2.1.18.8controlDECnet-iv
1.3.6.1.2.1.18.8.5phivControlParametersTableDECnet-iv
1.3.6.1.2.1.18.8.5.1phivControlParametersEntryDECnet-iv
Numeric OIDNameModule
1.3.6.1.2.1.18.8.5.1.5phivControlDyingBaseRFC1289-phivMIB