All MIBs › RFC1289-phivMIB › phivAreaMaxCost
phivAreaMaxCost
Module: RFC1289-phivMIB
OID (symbolic): RFC1289-phivMIB::phivAreaMaxCost
OID (numeric): 1.3.6.1.2.1.18.15.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This value represents the maximum total path cost allowed from the executor to any other level 2 routing node. The AREA MAXIMUM COST number is decimal in the range 1-1022. This parameter is only applicable if the executor node is of type AREA.
What is phivAreaMaxCost?
This sets the maximum total path cost allowed from this node to any other level-2 (area) routing node; it only applies if this node is itself configured as an AREA-type router. Admins raise it as the inter-area network grows more or costlier hops between area routers.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.15.2 snmpwalk -v2c -c public <target> RFC1289-phivMIB::phivAreaMaxCost
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.18.15.2.1 snmpget -v2c -c public <target> RFC1289-phivMIB::phivAreaMaxCost.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.18.15.2.1 i <value>
Start monitoring DECnet Phase IV network nodes with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1289-phivMIB::phivAreaMaxCost OID value, configure state conditions and alerts, and monitor any DECnet Phase IV network nodes from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.18 | phiv | DECnet-iv |
| 1.3.6.1.2.1.18.15 | area | DECnet-iv |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.18.15.2 | phivAreaMaxCost | RFC1289-phivMIB |