All MIBs › RFC1271-MIB › etherStatsDataSource
etherStatsDataSource
Module: RFC1271-MIB
OID (symbolic): RFC1271-MIB::etherStatsDataSource
OID (numeric): 1.3.6.1.2.1.16.1.1.1.2
Node type: OBJECT-TYPE
Type: OBJECT IDENTIFIER
Access: read-write
Description: This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in [4,6], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1.
The statistics in this group reflect all packets on the local network segment attached to the identified interface.
This object may not be modified if the associated etherStatsStatus object is equal to valid(1).
What is etherStatsDataSource?
OID identifying which interface (via its ifIndex instance, e.g. ifIndex.1) this etherStats entry collects statistics from; it reflects all packets on that interface's local segment and cannot be changed once the entry's status is valid.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.16.1.1.1.2 snmpwalk -v2c -c public <target> RFC1271-MIB::etherStatsDataSource
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.16.1.1.1.2.1 snmpget -v2c -c public <target> RFC1271-MIB::etherStatsDataSource.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.16.1.1.1.2.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> etherStatsDataSource.1
Start monitoring vendor-neutral, standards-based RMON MIB, RMON-capable network probes and switches monitoring Ethernet with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1271-MIB::etherStatsDataSource OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based RMON MIB, RMON-capable network probes and switches monitoring Ethernet from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.16 | rmon | LBHUB-BOOM-MIB |
| 1.3.6.1.2.1.16.1 | statistics | LBHUB-BOOM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.16.1.1 | etherStatsTable | RFC1271-MIB |
| 1.3.6.1.2.1.16.1.1.1 | etherStatsEntry | RFC1271-MIB |
| 1.3.6.1.2.1.16.1.1.1.2 | etherStatsDataSource | RFC1271-MIB |