All MIBs › RETIX-SWITCHSTAKII-MIB › baseErrorLog
baseErrorLog
Module: RETIX-SWITCHSTAKII-MIB
OID (symbolic): RETIX-SWITCHSTAKII-MIB::baseErrorLog
OID (numeric): 1.3.6.1.4.1.72.20.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A stored value indicating that the unit has experienced a fault. Log information is formatted as a four digit hex number. Set to zero to clear the logged fault. Record this value and call Retix technical support.
What is baseErrorLog?
This read-write integer stores a fault code the unit has logged, formatted as a four-digit hex number, which the admin can clear by setting it to zero. Admins read it after noticing a unit fault, record the hex value, and report it to Retix technical support for diagnosis before clearing the log. For example, an admin seeing baseErrorLog return 0x1A3F would record that code, contact support with it, and then set the object to 0 to clear the logged fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.72.20.2.3 snmpwalk -v2c -c public <target> RETIX-SWITCHSTAKII-MIB::baseErrorLog
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.72.20.2.3.1 snmpget -v2c -c public <target> RETIX-SWITCHSTAKII-MIB::baseErrorLog.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.72.20.2.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> baseErrorLog.1
Start monitoring legacy Retix SwitchStak II chassis equipment (board identity/stack-bus/VLAN configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RETIX-SWITCHSTAKII-MIB::baseErrorLog OID value, configure state conditions and alerts, and monitor any legacy Retix SwitchStak II chassis equipment (board identity/stack-bus/VLAN configuration) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.72 | retix | RETIX-METROLAN-MIB |
| 1.3.6.1.4.1.72.20 | metroLanSS | RETIX-METROLAN-MIB |
| 1.3.6.1.4.1.72.20.2 | ssBaseUnit | RETIX-METROLAN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.72.20.2.3 | baseErrorLog | RETIX-SWITCHSTAKII-MIB |