All MIBs › REPEATER-REV4-MIB › rptrRedundCrctReset
rptrRedundCrctReset
Module: REPEATER-REV4-MIB
OID (symbolic): REPEATER-REV4-MIB::rptrRedundCrctReset
OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: If this object is set to Reset, the circuit is reset. All of the circuit's associated boards and ports are returned to NOT_USED, any associated IP Addresses are purged from the circuit's address list, the name is cleared, and the retry count is reset to a default value. Setting this object to NoReset has no effect. When read, NoReset is always returned.
What is rptrRedundCrctReset?
Setting this to reset(2) wipes this one redundant circuit back to defaults — clears its name, purges its IP polling list, and returns its member boards/ports to NOT_USED — while noReset(1) does nothing and reads always return noReset(1).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9 snmpwalk -v2c -c public <target> REPEATER-REV4-MIB::rptrRedundCrctReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9.1 snmpget -v2c -c public <target> REPEATER-REV4-MIB::rptrRedundCrctReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9.1 i <value>
Start monitoring vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-REV4-MIB::rptrRedundCrctReset OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) from a single console.
OID Breakdown
Upper-level ancestors (16 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-ISDN-CONFIGURATION-MIB |
| 1.3.6.1.4.1.52.4.1.1 | ctPhysical | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1 | repeaterRev4 | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.1.1.4 | repeaterRev4 | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1 | rptr | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4 | rptrRedundancy | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2 | rptrRedundCrctTable | REPEATER-MIB |
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1 | rptrRedundCrctEntry | REPEATER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.1.1.4.1.4.2.1.9 | rptrRedundCrctReset | REPEATER-REV4-MIB |