REPEATER-REV4-MIB :: rptrPortSrcAddrForceTrunk

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › REPEATER-REV4-MIB › rptrPortSrcAddrForceTrunk

rptrPortSrcAddrForceTrunk

Module: REPEATER-REV4-MIB

OID (symbolic): REPEATER-REV4-MIB::rptrPortSrcAddrForceTrunk

OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: When this object is set to Force it causes the port to be placed into a Trunk topological state whether the network traffic would warrant such a state or not. When this object is set to NoForce it allows the port to assume the topological state it would naturally assume based on the network activity across it. When read this object reports the current setting.

What is rptrPortSrcAddrForceTrunk?

Setting this to force(2) manually pins this port into the Trunk topological state regardless of actual traffic patterns (useful when auto-detection misclassifies an uplink); noForce(1) lets the port's topology be determined naturally from observed traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4
snmpwalk -v2c -c public <target> REPEATER-REV4-MIB::rptrPortSrcAddrForceTrunk

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4.1
snmpget -v2c -c public <target> REPEATER-REV4-MIB::rptrPortSrcAddrForceTrunk.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rptrPortSrcAddrForceTrunk.1

Start monitoring vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-REV4-MIB::rptrPortSrcAddrForceTrunk OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) from a single console.

OID Breakdown

Upper-level ancestors (15 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.1ctPhysicalCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1repeaterRev4CTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1.4repeaterRev4REPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.3rptrPortREPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.3.5rptrPortSrcAddrTableREPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.3.5.1rptrPortSrcAddrEntryREPEATER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4rptrPortSrcAddrForceTrunkREPEATER-REV4-MIB