REPEATER-REV4-MIB :: rptrMgmtPortsEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › REPEATER-REV4-MIB › rptrMgmtPortsEnable

rptrMgmtPortsEnable

Module: REPEATER-REV4-MIB

OID (symbolic): REPEATER-REV4-MIB::rptrMgmtPortsEnable

OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Setting this object to Enable will cause all the ports residing in this network segment to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable.

What is rptrMgmtPortsEnable?

Setting this to enable(2) turns on every port on this network segment in one operation (useful after a maintenance window); setting noEnable(1) does nothing, and reads always return noEnable(1) since it's an action trigger, not stored state.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.1.3
snmpwalk -v2c -c public <target> REPEATER-REV4-MIB::rptrMgmtPortsEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.1.3.1
snmpget -v2c -c public <target> REPEATER-REV4-MIB::rptrMgmtPortsEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.1.3.1 i <value>

Start monitoring vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-REV4-MIB::rptrMgmtPortsEnable OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.1ctPhysicalCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1repeaterRev4CTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1.4repeaterRev4REPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.1rptrREPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.1.1rptrMgmtREPEATER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.1.1.4.1.1.3rptrMgmtPortsEnableREPEATER-REV4-MIB