REPEATER-REV4-MIB :: rptrAlarmsCollThreshold

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › REPEATER-REV4-MIB › rptrAlarmsCollThreshold

rptrAlarmsCollThreshold

Module: REPEATER-REV4-MIB

OID (symbolic): REPEATER-REV4-MIB::rptrAlarmsCollThreshold

OID (numeric): 1.3.6.1.4.1.52.4.1.1.1.4.1.3.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The collision threshold is the maximum number of collisions within the time base that will be allowed before an alarm is generated.

What is rptrAlarmsCollThreshold?

Sets the maximum number of collisions allowed within the alarm timebase (1-15) before a collision alarm fires for this network — a low value like 2 gives early warning on a lightly loaded segment.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.3.4
snmpwalk -v2c -c public <target> REPEATER-REV4-MIB::rptrAlarmsCollThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.3.4.1
snmpget -v2c -c public <target> REPEATER-REV4-MIB::rptrAlarmsCollThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.1.1.4.1.3.4.1 i <value>

Start monitoring vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REPEATER-REV4-MIB::rptrAlarmsCollThreshold OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (RFC 1516/IEEE 802.3), Ethernet repeater hubs (port status/collision statistics) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCT-PRIORITY-QUEUING
1.3.6.1.4.1.52.4.1ctronCTRON-ISDN-CONFIGURATION-MIB
1.3.6.1.4.1.52.4.1.1ctPhysicalCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1repeaterRev4CTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.1.1.4repeaterRev4REPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.1rptrREPEATER-MIB
1.3.6.1.4.1.52.4.1.1.1.4.1.3rptrAlarmsREPEATER-MIB
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.1.1.4.1.3.4rptrAlarmsCollThresholdREPEATER-REV4-MIB