All MIBs › REDLINE-AN80I-MIB › an80iMaximumDistance
an80iMaximumDistance
Module: REDLINE-AN80I-MIB
OID (symbolic): REDLINE-AN80I-MIB::an80iMaximumDistance
OID (numeric): 1.3.6.1.4.1.10728.2.1.3.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Maximum distance in km between the sector controller and one subscriber station.
What is an80iMaximumDistance?
Sets the maximum distance, in km (0-100), between the sector controller and a subscriber station. An admin sets this to match the actual deployment range so the system's timing parameters account for the correct propagation delay.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10728.2.1.3.2.1.2 snmpwalk -v2c -c public <target> REDLINE-AN80I-MIB::an80iMaximumDistance
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10728.2.1.3.2.1.2.1 snmpget -v2c -c public <target> REDLINE-AN80I-MIB::an80iMaximumDistance.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10728.2.1.3.2.1.2.1 i <value>
Start monitoring Redline AN80i point-to-point microwave backhaul radio (hardware/software/RF configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REDLINE-AN80I-MIB::an80iMaximumDistance OID value, configure state conditions and alerts, and monitor any Redline AN80i point-to-point microwave backhaul radio (hardware/software/RF configuration) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.10728 | redline | REDLINE-AN50-MIB |
| 1.3.6.1.4.1.10728.2 | redlineMgmt | REDLINE-AN50-MIB |
| 1.3.6.1.4.1.10728.2.1 | redlineSystem | REDLINE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10728.2.1.3 | redlineAn80iMib | REDLINE-AN80I-MIB |
| 1.3.6.1.4.1.10728.2.1.3.2 | redlineAn80iPmpObjects | REDLINE-AN80I-MIB |
| 1.3.6.1.4.1.10728.2.1.3.2.1 | redlineAn80iPmpWirelesObjects | REDLINE-AN80I-MIB |
| 1.3.6.1.4.1.10728.2.1.3.2.1.2 | an80iMaximumDistance | REDLINE-AN80I-MIB |