All MIBs › REDLINE-AN80I-MIB › an80iActivateConfig
an80iActivateConfig
Module: REDLINE-AN80I-MIB
OID (symbolic): REDLINE-AN80I-MIB::an80iActivateConfig
OID (numeric): 1.3.6.1.4.1.10728.2.1.3.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object will activate the new configuration without saving it in the nonvolatile memory. If after this event it will elapse more than 5 minutes and no save configuration occurs, then system will restart with the configuration from the nonvolatile memory.
What is an80iActivateConfig?
Activates the new configuration without saving it to nonvolatile memory when set to activeConfig(2); if more than 5 minutes pass without a save, the system reverts to the saved configuration on restart. An admin uses this to test a configuration change live before committing it permanently with an80iSaveConfig.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10728.2.1.3.1.1.5 snmpwalk -v2c -c public <target> REDLINE-AN80I-MIB::an80iActivateConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10728.2.1.3.1.1.5.1 snmpget -v2c -c public <target> REDLINE-AN80I-MIB::an80iActivateConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10728.2.1.3.1.1.5.1 i <value>
Start monitoring Redline AN80i point-to-point microwave backhaul radio (hardware/software/RF configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the REDLINE-AN80I-MIB::an80iActivateConfig OID value, configure state conditions and alerts, and monitor any Redline AN80i point-to-point microwave backhaul radio (hardware/software/RF configuration) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.10728 | redline | REDLINE-AN50-MIB |
| 1.3.6.1.4.1.10728.2 | redlineMgmt | REDLINE-AN50-MIB |
| 1.3.6.1.4.1.10728.2.1 | redlineSystem | REDLINE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10728.2.1.3 | redlineAn80iMib | REDLINE-AN80I-MIB |
| 1.3.6.1.4.1.10728.2.1.3.1 | redlineAn80iPtpPmpObjects | REDLINE-AN80I-MIB |
| 1.3.6.1.4.1.10728.2.1.3.1.1 | redlineAn80iSystemObjects | REDLINE-AN80I-MIB |
| 1.3.6.1.4.1.10728.2.1.3.1.1.5 | an80iActivateConfig | REDLINE-AN80I-MIB |