RBUC-MIB

All MIBs › RBUC-MIB

Organization: Codan Limited.

Last Updated: 2009-02-11

Category: Vendor: Codan

Description: Provides management objects for Codan satellite and HF radio communication equipment status and configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RBUC-MIB?

RBUC-MIB is a Codan enterprise SNMP MIB for the company's satellite and HF (high-frequency) radio communications equipment, such as block up-converters (BUCs) and RF transceiver units used in remote/rural connectivity and tactical communications gear. It exposes configuration and operational-status objects covering transmitter enable/attenuation settings, RF/IF/local-oscillator frequencies, serial-interface parameters, and general device mode/status/info fields. From a monitoring perspective it is used to confirm the RF chain is healthy and correctly configured -- checking transmitter on/off state, whether the unit is online, and current operating mode -- functioning as the equipment's basic operational-status reporting rather than exposing generic OS-level metrics like CPU or memory. As a small vendor enterprise MIB, it has no significant dependency on other standard MIBs beyond basic SNMP SMI conventions. It is deployed in remote satellite/HF radio installations (e.g., rural telecom backhaul, maritime, or tactical/field communications) where NOC staff need remote visibility into RF equipment state without a site visit. Engineers can download the RBUC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RBUC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Codan satellite BUC/RF equipment
Codan HF radio transceiver

Monitoring Examples

A network operations engineer would poll onLine and txOn to confirm a remote Codan radio/BUC unit is powered up and actively transmitting, and check rfFreq, ifFreq, and loFreq to verify the unit is tuned to the correct frequency plan. If txAttenuator or mode has drifted from its configured value, it would indicate an unexpected local reconfiguration or fault affecting link power/quality. The status and info objects give a general health snapshot for remote sites where physical access is impractical.

What Can Be Monitored

transmitter on/off state
RF/IF/local-oscillator frequency settings
attenuator configuration
online status
serial interface configuration

Imported Objects

From CODAN-SMI

satcomMibs

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION
TestAndIncr
TimeInterval
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rbucMIB	1.3.6.1.4.1.23304.2.1			The Structure of Management Information for the Codan enterprise. Copyright(c) 2009 All rights reserved
configuration	1.3.6.1.4.1.23304.2.1.1
txSettings	1.3.6.1.4.1.23304.2.1.1.1
INT txOn	1.3.6.1.4.1.23304.2.1.1.1.1	INTEGER	read-write	Sets Tx on/off.
T/F txDefault	1.3.6.1.4.1.23304.2.1.1.1.2	TruthValue	read-write	Sets Tx default 1-last 0-off.
INT txAttenuator	1.3.6.1.4.1.23304.2.1.1.1.3	INTEGER	read-write	Sets/Gets Tx attenuation value in 1dBm steps.
pktProtocol	1.3.6.1.4.1.23304.2.1.1.2
INT protocol	1.3.6.1.4.1.23304.2.1.1.2.1	INTEGER	read-write	Sets/Gets packet protocol 0 - ASCII, 1 - CODAN, 2 - .
INT address	1.3.6.1.4.1.23304.2.1.1.2.2	INTEGER	read-write	Sets/Gets packet address: 0-31 NDSatcom ...
rcSetting	1.3.6.1.4.1.23304.2.1.1.3
INT mode	1.3.6.1.4.1.23304.2.1.1.3.1	INTEGER	read-write	Sets/Gets redundancy mode 0-none, 1-warm, 2-hot.
T/F onLine	1.3.6.1.4.1.23304.2.1.1.3.2	TruthValue	read-write	Sets/Gets redundancy mode on on/off line state.
freqs	1.3.6.1.4.1.23304.2.1.1.4
INT rfFreq	1.3.6.1.4.1.23304.2.1.1.4.1	INTEGER	read-write	Sets/Gets the RBUC RF frequency.
INT ifFreq	1.3.6.1.4.1.23304.2.1.1.4.2	INTEGER	read-write	Sets/Gets the RBUC IF frequency.
INT loFreq	1.3.6.1.4.1.23304.2.1.1.4.3	INTEGER	read-write	Sets/Gets the RBUC LO frequency.
misc	1.3.6.1.4.1.23304.2.1.1.5
STR serIf	1.3.6.1.4.1.23304.2.1.1.5.1	DisplayString	read-write	Sets/Gets serial interface - rate, length, parity, stop, terminate RS422/485.
T/F serEcho	1.3.6.1.4.1.23304.2.1.1.5.2	TruthValue	read-write	Sets/Gets serial interface echo on/off.
STR pwrAlarmThresh	1.3.6.1.4.1.23304.2.1.1.5.3	DisplayString	read-write	Sets/Gets power alarm threshold.
STR burstPwrThresh	1.3.6.1.4.1.23304.2.1.1.5.4	DisplayString	read-write	Sets/Gets burst power threshold.
T/F refSource	1.3.6.1.4.1.23304.2.1.1.5.5	TruthValue	read-write	Sets/Gets reference source 0-external, 1-internal.
T/F ledState	1.3.6.1.4.1.23304.2.1.1.5.6	TruthValue	read-write	SetS/Gets LEDs status on/off.
status	1.3.6.1.4.1.23304.2.1.2
INT paStatus	1.3.6.1.4.1.23304.2.1.2.1	INTEGER	read-only	Gets to 1 when PA is on.
STR txPower	1.3.6.1.4.1.23304.2.1.2.2	DisplayString	read-only	Gets Tx power format x.x dB.
STR txBurstPower	1.3.6.1.4.1.23304.2.1.2.3	DisplayString	read-only	Gets Tx power. Format is x.x,y.y,z.z, where x.x is current burst power, y.y is min and z.z is max burts power.
INT faults	1.3.6.1.4.1.23304.2.1.2.4	INTEGER	read-only	Gets the current fault status. Format - Bit0 PA fault, Bit1 Fan fault, Bit2 Power fault, Bit3 Temp fault, Bit4 10MHz fault, Bit5 Internal fault Bit6 LNB fault, Bit7 Red'cy Cont fault.
INT latchedFaults	1.3.6.1.4.1.23304.2.1.2.5	INTEGER	read-only	Gets the current latched faults. Format is same as Faults.
STR temperature	1.3.6.1.4.1.23304.2.1.2.6	DisplayString	read-only	Gets the BUC temperature. Format is x.x.
STR minMaxTemperature	1.3.6.1.4.1.23304.2.1.2.7	DisplayString	read-only	Gets the BUC temperature. Format is x.x,y.y where x.x is max and y.y is min temperature.
INT systemSetting	1.3.6.1.4.1.23304.2.1.2.8	INTEGER	read-only	Gets the current system status. Format is Bit0 - PA state, Bit1 - RS232 Tx, Bit2 - FSK Tx, Bit3 - RS485 Tx Bit4 - Redundancy mode, Bit5 - Online, Bit6..Bit7 - Redundancy cold or hot mode, Bit8 - HTTP Tx, Bit9 - TELNET Tx, Bit10 - SNMP Tx.
INT systemPoll	1.3.6.1.4.1.23304.2.1.2.9	INTEGER	read-only	Gets the system poll status. Format is Bit0 - Fault, Bit1 - System change.
STR deviceType	1.3.6.1.4.1.23304.2.1.2.10	DisplayString	read-only	Gets the device type. Format is X,Y where X is the model and Y is software version.
STR gateway	1.3.6.1.4.1.23304.2.1.2.11	DisplayString	read-only	Gets the BUC gateway address.
STR ipAddr	1.3.6.1.4.1.23304.2.1.2.12	DisplayString	read-only	Gets the BUC IP address.
STR macAddress	1.3.6.1.4.1.23304.2.1.2.13	DisplayString	read-only	Gets the BUC MAC address.
STR netmask	1.3.6.1.4.1.23304.2.1.2.14	DisplayString	read-only	Gets the BUC netmask.
STR refPower	1.3.6.1.4.1.23304.2.1.2.15	DisplayString	read-only	Gets the BUC reference power.
STR bucConfiguration	1.3.6.1.4.1.23304.2.1.2.16	DisplayString	read-only	Gets the BUC configuration.
STR buildStandard	1.3.6.1.4.1.23304.2.1.2.17	DisplayString	read-only	Gets the BUC build standard.
info	1.3.6.1.4.1.23304.2.1.3
STR idInfo	1.3.6.1.4.1.23304.2.1.3.1	DisplayString	read-only	Gets the module firmware revision, serial number and model. This string will have a zero length if the revision is unknown.
STR limits	1.3.6.1.4.1.23304.2.1.3.2	DisplayString	read-only	Gets the limit data for the BUC. Format is: Power meter MIN/MAX , IF,RF and LO frequencies. This string will have a zero length if the revision is unknown.
STR pktProtocolsInfo	1.3.6.1.4.1.23304.2.1.3.3	DisplayString	read-only	Gets supported packet protocols and the corresponding address ranges.

RFC description

Radcom vendor-private MIB for management of unified communications or radio access platform components.

Start monitoring Codan satellite BUC/RF equipment, Codan HF radio transceiver (RF chain status/configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RBUC-MIB

What Is RBUC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description