RBN-MC-LAG-MIB :: rbnMcLagOperErrorCode

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › RBN-MC-LAG-MIB › rbnMcLagOperErrorCode

rbnMcLagOperErrorCode

Module: RBN-MC-LAG-MIB

OID (symbolic): RBN-MC-LAG-MIB::rbnMcLagOperErrorCode

OID (numeric): 1.3.6.1.4.1.2352.2.102.1.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The reason that MC-LAG is Down. configMismatch - MC-LAG is down because LAG related configuration is not the same between the two LAGs in an MC-LAG. priorityError - MC-LAG is down because the configured port priority values between the two LAGs of an MC-LAG are ambiguous as to which LAG is higher in priority. downMinLink - MC-LAG is down because the LAG doesn't have enough links that are up to satisfy the configured minimum link requirement.

What is rbnMcLagOperErrorCode?

This value reports why the MC-LAG is down, distinguishing a configuration mismatch between the two peer LAGs, ambiguous priority configuration, or insufficient active member links against the configured minimum. Admins use this code to triage an MC-LAG outage quickly instead of manually comparing configs on both chassis. For example, an rbnMcLagOperErrorCode of downMinLink(3) tells the admin to check the physical member links rather than the LACP priority settings.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2352.2.102.1.1.1.8
snmpwalk -v2c -c public <target> RBN-MC-LAG-MIB::rbnMcLagOperErrorCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2352.2.102.1.1.1.8.1
snmpget -v2c -c public <target> RBN-MC-LAG-MIB::rbnMcLagOperErrorCode.1

Start monitoring Ericsson (Redback) SmartEdge multi-chassis redundant edge router pair (MC-LAG) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RBN-MC-LAG-MIB::rbnMcLagOperErrorCode OID value, configure state conditions and alerts, and monitor any Ericsson (Redback) SmartEdge multi-chassis redundant edge router pair (MC-LAG) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2352redBackNetworksRBN-SMI
1.3.6.1.4.1.2352.2rbnMgmtRBN-SMI
1.3.6.1.4.1.2352.2.102rbnMcLagMIBRBN-LAG-MIB
1.3.6.1.4.1.2352.2.102.1rbnMcLagObjectsRBN-LAG-MIB
1.3.6.1.4.1.2352.2.102.1.1rbnMcLagTableRBN-LAG-MIB
1.3.6.1.4.1.2352.2.102.1.1.1rbnMcLagEntryRBN-LAG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2352.2.102.1.1.1.8rbnMcLagOperErrorCodeRBN-MC-LAG-MIB