RAY-MIB

All MIBs › RAY-MIB

Organization: Racom s.r.o

Last Updated: 2016-10-04

Category: Microwave Radio, Racom

Description: Manages Racom RAY radio modem link parameters, modulation settings, and signal statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RAY-MIB?

RAY-MIB is a vendor-specific MIB from Racom for managing the RAy series of point-to-point radio modem/microwave link products. It exposes device identification (product name, serial number, unit type, device name), software version, and radio link status objects including line status, peer information, RF power status, and search mode settings. It is explicitly used to monitor both hardware status (RF power, radio unit identity, peer connectivity) and software status (radio and system firmware versions, system status) of the radio link. It is a self-contained vendor MIB with limited dependency on external standards MIBs beyond basic SNMP conventions. It is typically deployed in point-to-point wireless microwave/radio backhaul links connecting remote sites. Engineers can download the RAY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RAY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Racom RAy series point-to-point radio modems

Monitoring Examples

An administrator would poll systemStatus and lineStatus to confirm the RAy radio link is operational, checking rfPowerStatus for signal strength issues and peerNumber/ethPeer to verify the correct number of link peers are connected. swVer and swVerRadio would be checked to confirm firmware consistency across linked units, while searchModeDisabled reveals whether the unit is actively hunting for a peer versus locked onto an established link, useful for diagnosing a link that has dropped and is attempting to reacquire.

What Can Be Monitored

system and line status
RF power status
peer count and identity
system and radio firmware version
search/acquisition mode
serial number and unit type

Imported Objects

From RFC1155-SMI

Gauge
IpAddress
enterprises

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-MIB

snmpTraps

OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32
mib-2

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using rxPauseFrames OID:

Select a Racom point-to-point radio modem as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rxPauseFrames into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of received Control frames with a valid PAUSE op-code. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
access	1.3.6.1.4.1.33555.1.1.6
NTF airConnect	1.3.6.1.4.1.33555.1.10.2			Air line connected after being disconnected. Not supported by RAy2.
NTF airDisconnect	1.3.6.1.4.1.33555.1.10.1			Air line disconnected. Not supported by RAy2.
NTF airWdog	1.3.6.1.4.1.33555.1.10.3			Air watch dog. Supported by RAy10 only.
alarm	1.3.6.1.4.1.33555.1.1.8
ALA alarmBer	1.3.6.1.4.1.33555.1.1.8.6	AlarmState	read-only	BER alarm state. Supported by RAy2 only.
ALA alarmEth1Down	1.3.6.1.4.1.33555.1.1.8.8	AlarmState	read-only	Ethernet 1 Link Down alarm state. Supported by RAy2 only.
ALA alarmEth2Down	1.3.6.1.4.1.33555.1.1.8.9	AlarmState	read-only	Ethernet 2 Link Down alarm state. Supported by RAy2 only.
ALA alarmNetBitrate	1.3.6.1.4.1.33555.1.1.8.11	AlarmState	read-only	Air Speed below Limit alarm state. Supported by RAy2 only.
ALA alarmPeerDisconnected	1.3.6.1.4.1.33555.1.1.8.7	AlarmState	read-only	Peer disconnect alarm state. Supported by RAy2 only.
ALA alarmRfPowerFail	1.3.6.1.4.1.33555.1.1.8.10	AlarmState	read-only	RF Power Fail alarm state. Supported by RAy2 only.
ALA alarmRss	1.3.6.1.4.1.33555.1.1.8.4	AlarmState	read-only	RSS alarm state. Supported by RAy2 only.
ALA alarmSnr	1.3.6.1.4.1.33555.1.1.8.5	AlarmState	read-only	SNR alarm state. Supported by RAy2 only.
ALA alarmTemperature	1.3.6.1.4.1.33555.1.1.8.1	AlarmState	read-only	Temperature alarm state. Supported by RAy2 only.
ALA alarmVoltageHigh	1.3.6.1.4.1.33555.1.1.8.3	AlarmState	read-only	High voltage alarm state. Supported by RAy2 only.
ALA alarmVoltageLow	1.3.6.1.4.1.33555.1.1.8.2	AlarmState	read-only	Low voltage alarm state. Supported by RAy2 only.
ALA alarmWifiOn	1.3.6.1.4.1.33555.1.1.8.12	AlarmState	read-only	WiFi Host Access Oint on. Supported by RAy2 only.
OPT asymPause	1.3.6.1.4.1.33555.1.2.2.1.1.6	OptionSetting	read-only	Ethernet asymmetric pause.
authorization	1.3.6.1.4.1.33555.1.1.7
OPT autonego	1.3.6.1.4.1.33555.1.2.2.1.1.4	OptionSetting	read-only	Ethernet autonego.
INT bandwidth	1.3.6.1.4.1.33555.1.2.1.9	INTEGER	read-only	Radio channel bandwidth. Supported by RAy10 only.
I32 bandwidthKHz	1.3.6.1.4.1.33555.1.2.1.15	Integer32	read-only	Radio channel bandwidth in kHz. Not supported by RAy10.
I32 ber	1.3.6.1.4.1.33555.1.3.2.11	Integer32	read-only	Bit Error Rate (BER) multiplied by 10^9. Not supported by RAy10.
NTF berAlarm	1.3.6.1.4.1.33555.1.10.9			BER exceeded the threshold. Not supported by RAy2.
INT channelArrangement	1.3.6.1.4.1.33555.1.2.1.16	INTEGER	read-only	Channel arrangement. Not supported by RAy10.
chassis	1.3.6.1.4.1.33555.1.1.4
INT coding	1.3.6.1.4.1.33555.1.2.1.10	INTEGER	read-only	Channel coding level. Supported by RAy10 only.
STR deviceName	1.3.6.1.4.1.33555.1.1.2.1	DisplayString	read-only	Station name.
INT duplex	1.3.6.1.4.1.33555.1.2.2.1.1.2	INTEGER	read-only	Ethernet duplex.
SER eth1Link	1.3.6.1.4.1.33555.1.1.3.9	ServiceState	read-only	Ethernet 1 link status. Supported by RAy2 only.
I32 eth2InThroughput	1.3.6.1.4.1.33555.1.3.3.3	Integer32	read-only	Input Ethernet 2 data port throughput in kbps. Supported by RAy2 only.
SER eth2Link	1.3.6.1.4.1.33555.1.1.3.10	ServiceState	read-only	Ethernet 2 link status. Supported by RAy2 only.
I32 eth2OutThroughput	1.3.6.1.4.1.33555.1.3.3.4	Integer32	read-only	Output Ethernet 2 data port throughput in kbps. Supported by RAy2 only.
ethernet	1.3.6.1.4.1.33555.1.3.3
I32 ethInThroughput	1.3.6.1.4.1.33555.1.3.3.1	Integer32	read-only	Input Ethernet 1 data port throughput in kbps. Not supported by RAy10.
I32 ethOutThroughput	1.3.6.1.4.1.33555.1.3.3.2	Integer32	read-only	Output Ethernet 1 data port throughput in kbps. Not supported by RAy10.
SER ethPeer	1.3.6.1.4.1.33555.1.1.3.6	ServiceState	read-only	Peer station user Ethernet link status. Not supported by RAy2.
C32 fecBlockCounter	1.3.6.1.4.1.33555.1.3.2.3	Counter32	read-only	Total block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only.
C32 fecUncorrectBlockCounter	1.3.6.1.4.1.33555.1.3.2.4	Counter32	read-only	Incorrect block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only.
OPT httpd	1.3.6.1.4.1.33555.1.1.6.3	OptionSetting	read-only	Management interface: HTTP.
ifEth	1.3.6.1.4.1.33555.1.2.2
ifEthEntry	1.3.6.1.4.1.33555.1.2.2.1.1		not-accessible	Ethernet interface entry.
ifEthTable	1.3.6.1.4.1.33555.1.2.2.1		not-accessible	List of Ethernet interfaces.
ifRadio	1.3.6.1.4.1.33555.1.2.1
info	1.3.6.1.4.1.33555.1.1.2
interface	1.3.6.1.4.1.33555.1.2
IP ip	1.3.6.1.4.1.33555.1.1.6.4	IpAddress	read-only	Management interface: IP address.
keyEntry	1.3.6.1.4.1.33555.1.1.7.1.1		not-accessible	Product key entry. Supported by RAy10 only.
STR keyName	1.3.6.1.4.1.33555.1.1.7.1.1.1	DisplayString	read-only	Product key name. Supported by RAy10 only.
keyTable	1.3.6.1.4.1.33555.1.1.7.1		not-accessible	List of product key entries. Supported by RAy10 only.
INT lineStatus	1.3.6.1.4.1.33555.1.1.3.2	INTEGER	read-only	Radio link status. Supported by RAy10 only.
INT lineStatusII	1.3.6.1.4.1.33555.1.1.3.8	INTEGER	read-only	Radio link status. Not supported by RAy10.
TIK linkUptime	1.3.6.1.4.1.33555.1.3.2.10	TimeTicks	read-only	Current radio link uptime. Not supported by RAy10.
PHY mac	1.3.6.1.4.1.33555.1.1.6.5	PhysAddress	read-only	Management interface: MAC address.
OPT managementVlan	1.3.6.1.4.1.33555.1.1.6.6	OptionSetting	read-only	Management interface: VLAN on/off.
I32 managementVlanId	1.3.6.1.4.1.33555.1.1.6.7	Integer32	read-only	Management interface: VLAN ID.
OPT matching	1.3.6.1.4.1.33555.1.2.1.11	OptionSetting	read-only	Channel matching.
I32 maxNetBitrate	1.3.6.1.4.1.33555.1.2.1.14	Integer32	read-only	Maximum net bitrate in Mbps.
INT mdix	1.3.6.1.4.1.33555.1.2.2.1.1.3	INTEGER	read-only	Ethernet MDI-X / MDI.
NTF memoryAlarm	1.3.6.1.4.1.33555.1.10.6			Memory use exceeded the threshold. Supported by RAy10 only.
modemR	1.3.6.1.4.1.33555.1.3.1
I32 netBitrate	1.3.6.1.4.1.33555.1.2.1.13	Integer32	read-only	Current net bitrate in kbps.
C32 numDisconnect	1.3.6.1.4.1.33555.1.3.2.8	Counter32	read-only	Number of drops (disconnecting).
OPT pause	1.3.6.1.4.1.33555.1.2.2.1.1.5	OptionSetting	read-only	Ethernet pause.
NTF peerEthLinkDown	1.3.6.1.4.1.33555.1.10.11			Peer station Ethernet link Up/Down. Not supported by RAy2.
G32 peerNumber	1.3.6.1.4.1.33555.1.1.3.3	Gauge32	read-only	Peer station serial number.
NTF powerAlarm	1.3.6.1.4.1.33555.1.10.5			Power voltage is out of the thresholds. Not supported by RAy2.
OPT prioritized	1.3.6.1.4.1.33555.1.2.2.2	OptionSetting	read-only	Ethernet prioritized VLAN support. Supported by RAy10 only.
product	1.3.6.1.4.1.33555.1.1.1
STR productName	1.3.6.1.4.1.33555.1.1.1.1	DisplayString	read-only	Product name.
racom	1.3.6.1.4.1.33555
radio	1.3.6.1.4.1.33555.1.3.2
ray	1.3.6.1.4.1.33555.1			The MIB module defines management objects for RAy product series. Revision 201610040000Z.
ray2Traps	1.3.6.1.4.1.33555.1.11
rayTraps	1.3.6.1.4.1.33555.1.10
I32 reliability	1.3.6.1.4.1.33555.1.3.2.9	Integer32	read-only	Reliability in thousandths of %.
I32 rfPowerConfigured	1.3.6.1.4.1.33555.1.2.1.12	Integer32	read-only	Configured RF Power in dBm.
I32 rfPowerCurrent	1.3.6.1.4.1.33555.1.2.1.17	Integer32	read-only	Current RF Power in dBm. Not supported by RAy10.
NTF rfPowerFail	1.3.6.1.4.1.33555.1.10.10			RF Power amplifier failure. Not supported.
INT rfPowerStatus	1.3.6.1.4.1.33555.1.1.3.4	INTEGER	read-only	RF Power amplifier OK/Failure.
I32 rss	1.3.6.1.4.1.33555.1.3.2.1	Integer32	read-only	Receiving RSS indicator in decimal dBm (-39 -> -3,9).
NTF rssAlarm	1.3.6.1.4.1.33555.1.10.7			RSS exceeded the threshold. Not supported by RAy2.
C32 rxBroadcast	1.3.6.1.4.1.33555.1.3.1.3	Counter32	read-only	Number of received packets with a broadcast destination address. Supported by RAy10 only.
STR rxChannel	1.3.6.1.4.1.33555.1.2.1.1	DisplayString	read-only	Receiver channel ID.
C32 rxCodeErrors	1.3.6.1.4.1.33555.1.3.1.8	Counter32	read-only	Number of received packets with one or more erroneous nibbles. Supported by RAy10 only.
C32 rxControlFrames	1.3.6.1.4.1.33555.1.3.1.2	Counter32	read-only	Number of received Control frames. Supported by RAy10 only.
C32 rxCrcErrors	1.3.6.1.4.1.33555.1.3.1.7	Counter32	read-only	Number of received frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only.
C32 rxDones	1.3.6.1.4.1.33555.1.3.1.5	Counter32	read-only	Number of successfully received packets. Supported by RAy10 only.
C32 rxDroppedPkts	1.3.6.1.4.1.33555.1.3.1.10	Counter32	read-only	Number of dropped packets. Supported by RAy10 only.
C32 rxFalseCarrierErrors	1.3.6.1.4.1.33555.1.3.1.9	Counter32	read-only	Rx false carrier errors. Supported by RAy10 only.
G32 rxFreq	1.3.6.1.4.1.33555.1.2.1.3	Gauge32	read-only	Receiver frequency in kHz.
C64 rxHCBytes	1.3.6.1.4.1.33555.1.3.1.11	Counter64	read-only	Number of received bytes. Supported by RAy10 only.
STR rxModulation	1.3.6.1.4.1.33555.1.2.1.5	DisplayString	read-only	Rx modulation text ID.
MOD rxModulationIndex	1.3.6.1.4.1.33555.1.2.1.7	ModulationList	read-only	Rx modulation index.
C32 rxMulticast	1.3.6.1.4.1.33555.1.3.1.4	Counter32	read-only	Number of received packets with a multicast destination address. Supported by RAy10 only.
C32 rxOutOfRangeErrors	1.3.6.1.4.1.33555.1.3.1.6	Counter32	read-only	Number of received frames larger than 1518 bytes (the frame Type/Length field is indicating a value larger than 1518 bytes). Supported by RAy10 only.
C32 rxPauseFramesEx	1.3.6.1.4.1.33555.1.3.1.1	Counter32	read-only	Number of received Control frames with a valid PAUSE op-code. Supported by RAy10 only.
OPT searchModeDisabled	1.3.6.1.4.1.33555.1.1.3.5	OptionSetting	read-only	Search mode disabled on/off. Supported by RAy10 only.
OPT securePeerMode	1.3.6.1.4.1.33555.1.1.3.7	OptionSetting	read-only	Secure peer mode. Not supported by RAy10.
G32 serialNumber	1.3.6.1.4.1.33555.1.1.1.2	Gauge32	read-only	Product serial number.
I32 serviceVlanId	1.3.6.1.4.1.33555.1.2.2.4	Integer32	read-only	Ethernet service VLAN ID between local and remote station. Not supported by RAy2.
I32 snr	1.3.6.1.4.1.33555.1.3.2.2	Integer32	read-only	Receiving SNR indicator in decimal dB (39 -> 3,9).
NTF snrAlarm	1.3.6.1.4.1.33555.1.10.8			SNR exceeded the threshold. Not supported by RAy2.
I32 speed	1.3.6.1.4.1.33555.1.2.2.1.1.1	Integer32	read-only	Ethernet speed.
INT sshd	1.3.6.1.4.1.33555.1.1.6.1	INTEGER	read-only	Management interface: SSH.
station	1.3.6.1.4.1.33555.1.1
statistic	1.3.6.1.4.1.33555.1.3
status	1.3.6.1.4.1.33555.1.1.3
STR swVer	1.3.6.1.4.1.33555.1.1.2.2	DisplayString	read-only	Firmware version.
STR swVerRadio	1.3.6.1.4.1.33555.1.1.2.3	DisplayString	read-only	Radio firmware version.
system	1.3.6.1.4.1.33555.1.1.5
INT systemStatus	1.3.6.1.4.1.33555.1.1.3.1	INTEGER	read-only	Unit status.
OPT telnetd	1.3.6.1.4.1.33555.1.1.6.2	OptionSetting	read-only	Management interface: Telnet.
NTF tempAlarm	1.3.6.1.4.1.33555.1.10.4			Temperature exceeded the threshold. Not supported by RAy2.
I32 temperatureModem	1.3.6.1.4.1.33555.1.1.4.1	Integer32	read-only	Modem temperature in hundredths of Celsius (C).
I32 temperatureRadio	1.3.6.1.4.1.33555.1.1.4.2	Integer32	read-only	Radio temperature in hundredths of Celsius (C).
TIK timeAllConnect	1.3.6.1.4.1.33555.1.3.2.5	TimeTicks	read-only	Overall link uptime.
TIK timeAllDisconnect	1.3.6.1.4.1.33555.1.3.2.6	TimeTicks	read-only	Overall link downtime.
TIK timeMaxDisconnect	1.3.6.1.4.1.33555.1.3.2.7	TimeTicks	read-only	The longest drop (disconnecting).
NTF tr2AirConnect	1.3.6.1.4.1.33555.1.11.8			Air line connected after being disconnected. Supported by RAy2 (up to fw 2.1.7.0) only.
NTF tr2AirDisconnect	1.3.6.1.4.1.33555.1.11.7			Air line disconnected. Supported by RAy2 only.
NTF tr2BerAlarm	1.3.6.1.4.1.33555.1.11.6			BER exceeded the threshold. Supported by RAy2 only.
NTF tr2Eth1LinkDown	1.3.6.1.4.1.33555.1.11.9			Local station Ethernet 1 link Up/Down. Supported by RAy2 only.
NTF tr2Eth21LinkDown	1.3.6.1.4.1.33555.1.11.10			Local station Ethernet 2 link Up/Down. Supported by RAy2 only.
NTF tr2NetBitrate	1.3.6.1.4.1.33555.1.11.12			Air speed below threshold. Supported by RAy2 only.
NTF tr2RfPowerFail	1.3.6.1.4.1.33555.1.11.11			RF Power amplifier failure. Supported by RAy2 only.
NTF tr2RssAlarm	1.3.6.1.4.1.33555.1.11.4			RSS exceeded the threshold. Supported by RAy2 only.
NTF tr2SnrAlarm	1.3.6.1.4.1.33555.1.11.5			SNR exceeded the threshold. Supported by RAy2 only.
NTF tr2TemperatureAlarm	1.3.6.1.4.1.33555.1.11.1			Temperature exceeded the threshold. Supported by RAy2 only.
NTF tr2VoltageHighAlarm	1.3.6.1.4.1.33555.1.11.3			Supply voltage above maximal threshold. Supported by RAy2 only.
NTF tr2VoltageLowAlarm	1.3.6.1.4.1.33555.1.11.2			Supply voltage below minimal threshold. Supported by RAy2 only.
NTF tr2WifiOn	1.3.6.1.4.1.33555.1.11.13			WiFi Host Access Point is on. Supported by RAy2 only.
C32 txBroadcast	1.3.6.1.4.1.33555.1.3.1.14	Counter32	read-only	Number of transmitted packets with a broadcast destination address. Supported by RAy10 only.
STR txChannel	1.3.6.1.4.1.33555.1.2.1.2	DisplayString	read-only	Transceiver channel ID.
C32 txCollisions	1.3.6.1.4.1.33555.1.3.1.19	Counter32	read-only	Tx collisions. Supported by RAy10 only.
C32 txControlFrames	1.3.6.1.4.1.33555.1.3.1.13	Counter32	read-only	Number of transmitted Control frames. Supported by RAy10 only.
C32 txCrcErrors	1.3.6.1.4.1.33555.1.3.1.18	Counter32	read-only	Number of transmitted frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only.
C32 txDones	1.3.6.1.4.1.33555.1.3.1.16	Counter32	read-only	Number of successfully transmitted packets. Supported by RAy10 only.
G32 txFreq	1.3.6.1.4.1.33555.1.2.1.4	Gauge32	read-only	Transceiver frequency in kHz.
C64 txHCBytes	1.3.6.1.4.1.33555.1.3.1.20	Counter64	read-only	Number of transmitted bytes. Supported by RAy10 only.
C32 txLengthCheckErrors	1.3.6.1.4.1.33555.1.3.1.17	Counter32	read-only	Number of transmitted packets with the frame Length field (not a Type field) value that does not match the actual data byte length. Supported by RAy10 only.
STR txModulation	1.3.6.1.4.1.33555.1.2.1.6	DisplayString	read-only	Tx modulation text ID.
MOD txModulationIndex	1.3.6.1.4.1.33555.1.2.1.8	ModulationList	read-only	Tx modulation index.
C32 txMulticast	1.3.6.1.4.1.33555.1.3.1.15	Counter32	read-only	Number of transmitted packets with a multicast destination address. Supported by RAy10 only.
C32 txPauseFrames	1.3.6.1.4.1.33555.1.3.1.12	Counter32	read-only	Number of transmitted Control frames with a valid PAUSE op-code. Supported by RAy10 only.
STR unitType	1.3.6.1.4.1.33555.1.1.1.3	DisplayString	read-only	Station type (L or H) and number of the Ethernet ports (1 or 2).
INT useCpu	1.3.6.1.4.1.33555.1.1.5.1	INTEGER	read-only	System use CPU in %.
INT useLogStorage	1.3.6.1.4.1.33555.1.1.5.3	INTEGER	read-only	Use storage for log in %.
INT useMemory	1.3.6.1.4.1.33555.1.1.5.2	INTEGER	read-only	System use memory in %.
I32 vlanId	1.3.6.1.4.1.33555.1.2.2.3	Integer32	read-only	Ethernet prioritized VLAN ID. Supported by RAy10 only.
INT voltageSource	1.3.6.1.4.1.33555.1.1.4.4	INTEGER	read-only	Source of supply voltage. Supported by RAy2 only.
I32 voltageUnit	1.3.6.1.4.1.33555.1.1.4.3	Integer32	read-only	Power supply voltage in tenths of Volts (V).
OPT wifiHAP	1.3.6.1.4.1.33555.1.1.6.8	OptionSetting	read-only	Management interface: WiFi Host Access Point.

RFC description

Monitors RAy wireless radio product series including service states, alarms, modulation, and device status information.

Start monitoring Racom point-to-point radio modems with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RAY-MIB