All MIBs › RAISECOM-OPTICAL-MONITOR-MIB › raisecomOpticalParamLowWarningThresh
raisecomOpticalParamLowWarningThresh
Module: RAISECOM-OPTICAL-MONITOR-MIB
OID (symbolic): RAISECOM-OPTICAL-MONITOR-MIB::raisecomOpticalParamLowWarningThresh
OID (numeric): 1.3.6.1.4.1.8886.1.9.1.1.1.1.6
Node type: OBJECT-TYPE
Type: OpticalParameterValue
Access: read-only
Description: This object is used to set a low warning threshold on the optical parameter being monitored.
A threshold crossing condition will be indicated if the value given by raisecomOpticalParameterValue goes from above the value of this object to below the value of this object, or if the initial value of raisecomOpticalParameterValue object is lower than the value of this object. For network elements in the status indications, this threshold violation will be indicated in the raisecomOpticalParamAlarmStatus object .
What is raisecomOpticalParamLowWarningThresh?
The low-warning threshold for the optical parameter in this row, a less severe trip point than the low alarm threshold, useful for catching a slowly degrading signal before it becomes critical.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.1.9.1.1.1.1.6 snmpwalk -v2c -c public <target> RAISECOM-OPTICAL-MONITOR-MIB::raisecomOpticalParamLowWarningThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.1.9.1.1.1.1.6.1 snmpget -v2c -c public <target> RAISECOM-OPTICAL-MONITOR-MIB::raisecomOpticalParamLowWarningThresh.1
Start monitoring Raisecom optical transport/access network elements (digital optical monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-OPTICAL-MONITOR-MIB::raisecomOpticalParamLowWarningThresh OID value, configure state conditions and alerts, and monitor any Raisecom optical transport/access network elements (digital optical monitoring) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.1 | raisecomAgent | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.1.9 | raisecomOpticalMonitorMIB | RAISECOM-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.8886.1.9.1 | raisecomOpticalMonitorMIBObjects | RAISECOM-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.8886.1.9.1.1 | raisecomOpticalMonGroup | RAISECOM-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.8886.1.9.1.1.1 | raisecomOpticalMonTable | RAISECOM-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1 | raisecomOpticalMonEntry | RAISECOM-OPTICAL-MONITOR-MIB |
| 1.3.6.1.4.1.8886.1.9.1.1.1.1.6 | raisecomOpticalParamLowWarningThresh | RAISECOM-OPTICAL-MONITOR-MIB |