RAISECOM-OPTICAL-MONITOR-MIB :: raisecomOpticalParamHighWarningThresh

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RAISECOM-OPTICAL-MONITOR-MIB › raisecomOpticalParamHighWarningThresh

raisecomOpticalParamHighWarningThresh

Module: RAISECOM-OPTICAL-MONITOR-MIB

OID (symbolic): RAISECOM-OPTICAL-MONITOR-MIB::raisecomOpticalParamHighWarningThresh

OID (numeric): 1.3.6.1.4.1.8886.1.9.1.1.1.1.4

Node type: OBJECT-TYPE

Type: OpticalParameterValue

Access: read-only

Description: This object is used to set a high warning threshold on the optical parameter being monitored.

A threshold crossing condition will be indicated if the value given by raisecomOpticalParameterValue goes from below the value of this object to above the value of this object, or if the initial value of raisecomOpticalParameterValue exceeds the value of this object. This alarm will be indicated in the raisecomOpticalParamAlarmStatus object.

What is raisecomOpticalParamHighWarningThresh?

The high-warning threshold for the optical parameter in this row, a less severe trip point than the high alarm threshold, used to give early notice of a value trending upward.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.1.9.1.1.1.1.4
snmpwalk -v2c -c public <target> RAISECOM-OPTICAL-MONITOR-MIB::raisecomOpticalParamHighWarningThresh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.1.9.1.1.1.1.4.1
snmpget -v2c -c public <target> RAISECOM-OPTICAL-MONITOR-MIB::raisecomOpticalParamHighWarningThresh.1

Start monitoring Raisecom optical transport/access network elements (digital optical monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-OPTICAL-MONITOR-MIB::raisecomOpticalParamHighWarningThresh OID value, configure state conditions and alerts, and monitor any Raisecom optical transport/access network elements (digital optical monitoring) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.1raisecomAgentRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.1.9raisecomOpticalMonitorMIBRAISECOM-OPTICAL-MONITOR-MIB
1.3.6.1.4.1.8886.1.9.1raisecomOpticalMonitorMIBObjectsRAISECOM-OPTICAL-MONITOR-MIB
1.3.6.1.4.1.8886.1.9.1.1raisecomOpticalMonGroupRAISECOM-OPTICAL-MONITOR-MIB
1.3.6.1.4.1.8886.1.9.1.1.1raisecomOpticalMonTableRAISECOM-OPTICAL-MONITOR-MIB
1.3.6.1.4.1.8886.1.9.1.1.1.1raisecomOpticalMonEntryRAISECOM-OPTICAL-MONITOR-MIB
1.3.6.1.4.1.8886.1.9.1.1.1.1.4raisecomOpticalParamHighWarningThreshRAISECOM-OPTICAL-MONITOR-MIB