RAISECOM-LLDP-STD-MIB :: lldpTxDelay

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsRAISECOM-LLDP-STD-MIBlldpTxDelay

lldpTxDelay

Module: RAISECOM-LLDP-STD-MIB

OID (symbolic): RAISECOM-LLDP-STD-MIB::lldpTxDelay

OID (numeric): 1.3.6.1.4.1.8886.6.1.57.1.1.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. The recommended value for the lldpTxDelay is set by the following formula:

1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval)

The default value for lldpTxDelay object is two seconds.

The value of this object must be restored from non-volatile storage after a re-initialization of the management system.

What is lldpTxDelay?

The minimum delay in seconds (1-8192, default 2) between successive LLDP frame transmissions triggered by local system changes, recommended to be no more than a quarter of lldpMessageTxInterval, which keeps a rapidly changing local system from flooding the network with LLDP updates.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.57.1.1.1.4
snmpwalk -v2c -c public <target> RAISECOM-LLDP-STD-MIB::lldpTxDelay

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.57.1.1.1.4.1
snmpget -v2c -c public <target> RAISECOM-LLDP-STD-MIB::lldpTxDelay.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.57.1.1.1.4.1 i <value>

Start monitoring Raisecom carrier Ethernet/access switches (IEEE 802.1AB LLDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-LLDP-STD-MIB::lldpTxDelay OID value, configure state conditions and alerts, and monitor any Raisecom carrier Ethernet/access switches (IEEE 802.1AB LLDP) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6iscomSeriesRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6.1iscomSwitchRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.6.1.57rcLldpRAISECOM-LLDP-STD-MIB
1.3.6.1.4.1.8886.6.1.57.1rcLldpStandardRAISECOM-LLDP-STD-MIB
1.3.6.1.4.1.8886.6.1.57.1.1lldpObjectsRAISECOM-LLDP-STD-MIB
1.3.6.1.4.1.8886.6.1.57.1.1.1lldpConfigurationRAISECOM-LLDP-STD-MIB
1.3.6.1.4.1.8886.6.1.57.1.1.1.4lldpTxDelayRAISECOM-LLDP-STD-MIB