All MIBs › RAISECOM-LLDP-STD-MIB › lldpReinitDelay
lldpReinitDelay
Module: RAISECOM-LLDP-STD-MIB
OID (symbolic): RAISECOM-LLDP-STD-MIB::lldpReinitDelay
OID (numeric): 1.3.6.1.4.1.8886.6.1.57.1.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The lldpReinitDelay indicates the delay (in units of seconds) from when lldpPortConfigAdminStatus object of a particular port becomes 'disabled' until re-initialization will be attempted.
The default value for lldpReintDelay object is two seconds.
The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
What is lldpReinitDelay?
The delay in seconds (1-10, default 2) the agent waits after a port's LLDP admin status becomes disabled before it will attempt to re-initialize LLDP on that port, a brief settling period an admin relies on to avoid rapid flapping.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.57.1.1.1.3 snmpwalk -v2c -c public <target> RAISECOM-LLDP-STD-MIB::lldpReinitDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.57.1.1.1.3.1 snmpget -v2c -c public <target> RAISECOM-LLDP-STD-MIB::lldpReinitDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.57.1.1.1.3.1 i <value>
Start monitoring Raisecom carrier Ethernet/access switches (IEEE 802.1AB LLDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-LLDP-STD-MIB::lldpReinitDelay OID value, configure state conditions and alerts, and monitor any Raisecom carrier Ethernet/access switches (IEEE 802.1AB LLDP) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.57 | rcLldp | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1 | rcLldpStandard | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1.1 | lldpObjects | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1.1.1 | lldpConfiguration | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1.1.1.3 | lldpReinitDelay | RAISECOM-LLDP-STD-MIB |