All MIBs › RAISECOM-LLDP-STD-MIB › lldpPortConfigTLVsTxEnable
lldpPortConfigTLVsTxEnable
Module: RAISECOM-LLDP-STD-MIB
OID (symbolic): RAISECOM-LLDP-STD-MIB::lldpPortConfigTLVsTxEnable
OID (numeric): 1.3.6.1.4.1.8886.6.1.57.1.1.1.6.1.4
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: The lldpPortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV.
It should be noted that the organizationally-specific TLVs are excluded from the lldpTLVsTxEnable bitmap.
LLDP Organization Specific Information Extension MIBs should have similar configuration object to control transmission of their organizationally defined TLVs.
The bit 'portDesc(0)' indicates that LLDP agent should transmit 'Port Description TLV'.
The bit 'sysName(1)' indicates that LLDP agent should transmit 'System Name TLV'.
The bit 'sysDesc(2)' indicates that LLDP agent should transmit 'System Description TLV'.
The bit 'sysCap(3)' indicates that LLDP agent should transmit 'System Capabilities TLV'.
There is no bit reserved for the management address TLV type since transmission of management address TLVs are controlled by another object, lldpConfigManAddrTable.
The default value for lldpPortConfigTLVsTxEnable object is empty set, which means no enumerated values are set.
The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.57.1.1.1.6.1.4 snmpwalk -v2c -c public <target> RAISECOM-LLDP-STD-MIB::lldpPortConfigTLVsTxEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.57.1.1.1.6.1.4.1 snmpget -v2c -c public <target> RAISECOM-LLDP-STD-MIB::lldpPortConfigTLVsTxEnable.1
Start monitoring Raisecom carrier Ethernet/access switches (IEEE 802.1AB LLDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-LLDP-STD-MIB::lldpPortConfigTLVsTxEnable OID value, configure state conditions and alerts, and monitor any Raisecom carrier Ethernet/access switches (IEEE 802.1AB LLDP) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.57 | rcLldp | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1 | rcLldpStandard | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1.1 | lldpObjects | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1.1.1 | lldpConfiguration | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1.1.1.6 | lldpPortConfigTable | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1.1.1.6.1 | lldpPortConfigEntry | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1.1.1.6.1.4 | lldpPortConfigTLVsTxEnable | RAISECOM-LLDP-STD-MIB |