All MIBs › RAISECOM-LLDP-STD-MIB › lldpNotificationInterval
lldpNotificationInterval
Module: RAISECOM-LLDP-STD-MIB
OID (symbolic): RAISECOM-LLDP-STD-MIB::lldpNotificationInterval
OID (numeric): 1.3.6.1.4.1.8886.6.1.57.1.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object controls the transmission of LLDP notifications.
the agent must not generate more than one lldpRemTablesChange notification-event in the indicated period, where a 'notification-event' is the transmission of a single notification PDU type to a list of notification destinations. If additional changes in lldpRemoteSystemsData object groups occur within the indicated throttling period, then these trap- events must be suppressed by the agent. An NMS should periodically check the value of lldpStatsRemTableLastChangeTime to detect any missed lldpRemTablesChange notification-events, e.g. due to throttling or transmission loss.
If notification transmission is enabled for particular ports, the suggested default throttling period is 5 seconds.
The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
What is lldpNotificationInterval?
The throttling interval in seconds (5-3600, default 5) limiting how often the agent sends lldpRemTablesChange notifications, even if multiple neighbor-table changes occur within that window; an admin should periodically poll lldpStatsRemTablesLastChangeTime to catch changes suppressed by this throttling.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.57.1.1.1.5 snmpwalk -v2c -c public <target> RAISECOM-LLDP-STD-MIB::lldpNotificationInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.57.1.1.1.5.1 snmpget -v2c -c public <target> RAISECOM-LLDP-STD-MIB::lldpNotificationInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.57.1.1.1.5.1 i <value>
Start monitoring Raisecom carrier Ethernet/access switches (IEEE 802.1AB LLDP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-LLDP-STD-MIB::lldpNotificationInterval OID value, configure state conditions and alerts, and monitor any Raisecom carrier Ethernet/access switches (IEEE 802.1AB LLDP) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.57 | rcLldp | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1 | rcLldpStandard | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1.1 | lldpObjects | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1.1.1 | lldpConfiguration | RAISECOM-LLDP-STD-MIB |
| 1.3.6.1.4.1.8886.6.1.57.1.1.1.5 | lldpNotificationInterval | RAISECOM-LLDP-STD-MIB |