RAISECOM-DOT1AG-MIB :: rcDot1agCfmMepIfIndex

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RAISECOM-DOT1AG-MIB › rcDot1agCfmMepIfIndex

rcDot1agCfmMepIfIndex

Module: RAISECOM-DOT1AG-MIB

OID (symbolic): RAISECOM-DOT1AG-MIB::rcDot1agCfmMepIfIndex

OID (numeric): 1.3.6.1.4.1.8886.6.1.32.1.7.1.1.2

Node type: OBJECT-TYPE

Type: InterfaceIndexOrZero

Access: read-create

Description: This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached.

Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the system restart. If no such entry exists, then the system SHALL set this variable to 0.

What is rcDot1agCfmMepIfIndex?

This is the ifIndex of the bridge port (or aggregated link within one) that this MEP is attached to. On a system restart, the agent tries to preserve the mapping by matching the prior interface's ifAlias, falling back to 0 if no matching interface can be found.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6iscomSeriesRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6.1iscomSwitchRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.6.1.32rcDot1agRAISECOM-DOT1AG-MIB
1.3.6.1.4.1.8886.6.1.32.1rcDot1agMIBObjectsRAISECOM-DOT1AG-MIB
1.3.6.1.4.1.8886.6.1.32.1.7rcDot1agCfmMepRAISECOM-DOT1AG-MIB
1.3.6.1.4.1.8886.6.1.32.1.7.1rcDot1agCfmMepTableRAISECOM-DOT1AG-MIB
1.3.6.1.4.1.8886.6.1.32.1.7.1.1rcDot1agCfmMepEntryRAISECOM-DOT1AG-MIB
1.3.6.1.4.1.8886.6.1.32.1.7.1.1.2rcDot1agCfmMepIfIndexRAISECOM-DOT1AG-MIB