RADLAN-OSPFV3-MIB :: rlOspfv3IfMtuIgnore

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RADLAN-OSPFV3-MIB › rlOspfv3IfMtuIgnore

rlOspfv3IfMtuIgnore

Module: RADLAN-OSPFV3-MIB

OID (symbolic): RADLAN-OSPFV3-MIB::rlOspfv3IfMtuIgnore

OID (numeric): 1.3.6.1.4.1.89.216.8.1.31

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object controls whether DC-OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description packet is higher than the MTU size configured on the incoming interface, the OSPF adjacency will not be established. If the interface is tunneled over, say, an MPLS network, then the administrator may not know the maximum MTU size and so can tell DC-OSPF to ignore the MTU size on incoming DB description packets.

What is rlOspfv3IfMtuIgnore?

This controls whether the router checks the MTU size reported in incoming Database Description packets against its own interface MTU. By default a mismatch, a received MTU larger than the local interface's, blocks adjacency formation; admins enable this object to ignore that check, which is useful when the interface is tunneled, say over an MPLS network, and the true path MTU isn't known.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.216.8.1.31
snmpwalk -v2c -c public <target> RADLAN-OSPFV3-MIB::rlOspfv3IfMtuIgnore

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.89.216.8.1.31.1
snmpget -v2c -c public <target> RADLAN-OSPFV3-MIB::rlOspfv3IfMtuIgnore.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.89.216.8.1.31.1 s <value>

Start monitoring Marvell (formerly RADLAN) Layer 3 switches/routers (multi-instance OSPFv3) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RADLAN-OSPFV3-MIB::rlOspfv3IfMtuIgnore OID value, configure state conditions and alerts, and monitor any Marvell (formerly RADLAN) Layer 3 switches/routers (multi-instance OSPFv3) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.89rndDell-MIB
Numeric OIDNameModule
1.3.6.1.4.1.89.216rlOspfv3RADLAN-OSPFV3-MIB
1.3.6.1.4.1.89.216.8rlOspfv3IfTableRADLAN-OSPFV3-MIB
1.3.6.1.4.1.89.216.8.1rlOspfv3IfEntryRADLAN-OSPFV3-MIB
1.3.6.1.4.1.89.216.8.1.31rlOspfv3IfMtuIgnoreRADLAN-OSPFV3-MIB