All MIBs › RADLAN-OSPFV3-MIB › rlOspfv3EnableNotificationsOspfEvents
rlOspfv3EnableNotificationsOspfEvents
Module: RADLAN-OSPFV3-MIB
OID (symbolic): RADLAN-OSPFV3-MIB::rlOspfv3EnableNotificationsOspfEvents
OID (numeric): 1.3.6.1.4.1.89.216.17
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: A bit mask indicating enable SNMP notifications for OSPF errors.
Bit 0, if set, for authenticationFailure trap. enables only the ospfIfFailure trap. Allows SNMP notifications to be sent when a packet has been received on a nonvirtual interface from a neighbor router whose authentication key or authentication type conflicts with the authentication key or authentication type of this router.
Bit 1, if set, for badPacket trap. enables only the ospfIfRxBadPacket trap. Allows SNMP notifications to be sent when an OSPF packet that has not been parsed has been received on a nonvirtual interface.
Bit 2, if set, for configError trap. enables only the ospfIfConfigError trap. Sends SNMP notifications when a packet has been received in a nonvirtual interface from a neighbor router whose configuration parameters conflict with the configuration parameters of this router.
Bit 3, if set, for virtAuthenticationFailure trap. enables only the ospfVirtIfFailure trap. Allows SNMP notifications to be sent when a packet has been received on a virtual interface from a neighbor router whose authentication key or authentication type conflicts with the authentication key or authentication type of this router.
Bit 4, if set, for virtBadPacket trap. enables only the ospfVirtIfRxBadPacket trap. Allows SNMP notifications to be sent when an OSPF packet that has not been parsed has been received on a virtual interface.
Bit 5, if set, for virtConfigError trap. enables only the ospfVirtIfConfigError trap. Sends SNMP notifications when a packet has been received in a virtual interface from a neighbor router whose configuration parameters conflict with the configuration parameters of this router.
What is rlOspfv3EnableNotificationsOspfEvents?
This is a bit mask controlling which categories of OSPFv3 error notifications are enabled, covering authentication failures, unparseable packets, and configuration errors, each with separate bits for virtual and non-virtual interfaces. Admins set the relevant bits to enable only the specific trap types they want to monitor, for example enabling just configError (bit 2) without enabling badPacket notifications.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.216.17 snmpwalk -v2c -c public <target> RADLAN-OSPFV3-MIB::rlOspfv3EnableNotificationsOspfEvents
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.216.17.1 snmpget -v2c -c public <target> RADLAN-OSPFV3-MIB::rlOspfv3EnableNotificationsOspfEvents.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.89.216.17.1 i <value>
Start monitoring Marvell (formerly RADLAN) Layer 3 switches/routers (multi-instance OSPFv3) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RADLAN-OSPFV3-MIB::rlOspfv3EnableNotificationsOspfEvents OID value, configure state conditions and alerts, and monitor any Marvell (formerly RADLAN) Layer 3 switches/routers (multi-instance OSPFv3) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.89.216 | rlOspfv3 | RADLAN-OSPFV3-MIB |
| 1.3.6.1.4.1.89.216.17 | rlOspfv3EnableNotificationsOspfEvents | RADLAN-OSPFV3-MIB |