All MIBs › RADIO-BRIDGE-MIB › rfChannelWidth
rfChannelWidth
Module: RADIO-BRIDGE-MIB
OID (symbolic): RADIO-BRIDGE-MIB::rfChannelWidth
OID (numeric): 1.3.6.1.4.1.31926.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is rfChannelWidth?
The RF channel bandwidth in use: rfWidth250(1) for a 250 MHz channel or rfWidth500(2) for a 500 MHz channel. Wider channels raise achievable throughput but require correspondingly more spectrum, so an admin sets this based on the spectrum license or unlicensed band the link operates in.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.31926.2.1.1.3 snmpwalk -v2c -c public <target> RADIO-BRIDGE-MIB::rfChannelWidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.31926.2.1.1.3.1 snmpget -v2c -c public <target> RADIO-BRIDGE-MIB::rfChannelWidth.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.31926.2.1.1.3.1 i <value>
Start monitoring microwave radio bridge link unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RADIO-BRIDGE-MIB::rfChannelWidth OID value, configure state conditions and alerts, and monitor any microwave radio bridge link unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.31926 | radioBridgeRoot | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.2 | radioBridgeRf | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.2.1 | rbRfTable | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.2.1.1 | rbRfEntry | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.2.1.1.3 | rfChannelWidth | RADIO-BRIDGE-MIB |