All MIBs › RADIO-BRIDGE-MIB › ethernetLoopMode
ethernetLoopMode
Module: RADIO-BRIDGE-MIB
OID (symbolic): RADIO-BRIDGE-MIB::ethernetLoopMode
OID (numeric): 1.3.6.1.4.1.31926.5.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is ethernetLoopMode?
Configures a diagnostic Ethernet loopback on this interface: disabled(0), external(1)/external-mac-swap(2) looping traffic back out the physical port, or internal(3)/internal-mac-swap(4) looping within the device. Technicians use this to test cabling or the radio link without needing traffic from a remote test set.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.31926.5.1.1.3 snmpwalk -v2c -c public <target> RADIO-BRIDGE-MIB::ethernetLoopMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.31926.5.1.1.3.1 snmpget -v2c -c public <target> RADIO-BRIDGE-MIB::ethernetLoopMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.31926.5.1.1.3.1 i <value>
Start monitoring microwave radio bridge link unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RADIO-BRIDGE-MIB::ethernetLoopMode OID value, configure state conditions and alerts, and monitor any microwave radio bridge link unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.31926 | radioBridgeRoot | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.5 | radioBridgeEthernet | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.5.1 | rbEthernetTable | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.5.1.1 | rbEthernetEntry | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.5.1.1.3 | ethernetLoopMode | RADIO-BRIDGE-MIB |