All MIBs › RADIO-BRIDGE-MIB › ethernetAlarmPropagation
ethernetAlarmPropagation
Module: RADIO-BRIDGE-MIB
OID (symbolic): RADIO-BRIDGE-MIB::ethernetAlarmPropagation
OID (numeric): 1.3.6.1.4.1.31926.5.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is ethernetAlarmPropagation?
Configures whether a link-down condition on this Ethernet interface is propagated as an alarm: disabled(0), backward(1) toward the source, forward(2) toward the destination, or both-direct(3). Operators enable propagation so that a fault on one segment (e.g. the radio link) is signaled to the attached switch, triggering fast failover on redundant paths.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.31926.5.1.1.2 snmpwalk -v2c -c public <target> RADIO-BRIDGE-MIB::ethernetAlarmPropagation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.31926.5.1.1.2.1 snmpget -v2c -c public <target> RADIO-BRIDGE-MIB::ethernetAlarmPropagation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.31926.5.1.1.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ethernetAlarmPropagation.1
Start monitoring microwave radio bridge link unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RADIO-BRIDGE-MIB::ethernetAlarmPropagation OID value, configure state conditions and alerts, and monitor any microwave radio bridge link unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.31926 | radioBridgeRoot | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.5 | radioBridgeEthernet | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.5.1 | rbEthernetTable | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.5.1.1 | rbEthernetEntry | RADIO-BRIDGE-MIB |
| 1.3.6.1.4.1.31926.5.1.1.2 | ethernetAlarmPropagation | RADIO-BRIDGE-MIB |