All MIBs › QB-SONET-MIB › qbSonetPortMediumType
qbSonetPortMediumType
Module: QB-SONET-MIB
OID (symbolic): QB-SONET-MIB::qbSonetPortMediumType
OID (numeric): 1.3.6.1.4.1.4323.2.6.2.1.1.4
Node type: OBJECT-TYPE
Type: QbSonetType
Access: read-write
Description: Setting this object defines whether SONET, SDH, SDHDS1, or SONETM13 signal is used across the chassis/slot. At initial start up the object is set to 'sonet(1)' This object is used in conjunction with qbSonetSlot object which defines a scope of the configuration parameter: chassis wide or slot wide. sonet(1) - sets signal format to 'sonet'. sdh(2) - sets signal format to 'sdh/VC12' sdhDs1(2) - sets signal format to 'sdh/VC11' sonetM13(2) - sets signal format to 'sonet/M13 payload' When read, the value of the object is always 'unknown(3)' This parameter is applied to D155VT/VC-T.
What is qbSonetPortMediumType?
This selects the line-signal format, SONET, SDH/VC12, SDH-DS1/VC11, or SONET/M13, for this specific SONET interface entry in the medium table. Unlike the chassis- or slot-scoped qbSonetMediumType, this lets an admin set the signal format on a single interface when different ports on the same card need different framing. Setting qbSonetPortMediumType to sonetM13(4) on one interface's row applies SONET/M13 payload framing to just that port, regardless of the chassis-wide default.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4323.2.6.2.1.1.4 snmpwalk -v2c -c public <target> QB-SONET-MIB::qbSonetPortMediumType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4323.2.6.2.1.1.4.1 snmpget -v2c -c public <target> QB-SONET-MIB::qbSonetPortMediumType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4323.2.6.2.1.1.4.1 s <value>
Start monitoring Quantum Bridge SONET transport equipment/ADM (APS/alarm extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QB-SONET-MIB::qbSonetPortMediumType OID value, configure state conditions and alerts, and monitor any Quantum Bridge SONET transport equipment/ADM (APS/alarm extensions) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4323 | quantumBridge | QUANTUMBRIDGE-REG |
| 1.3.6.1.4.1.4323.2 | qbMibs | QUANTUMBRIDGE-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4323.2.6 | qbSonetMIB | QB-SONET-MIB |
| 1.3.6.1.4.1.4323.2.6.2 | qbSonetTables | QB-SONET-MIB |
| 1.3.6.1.4.1.4323.2.6.2.1 | qbSonetMediumTable | QB-SONET-MIB |
| 1.3.6.1.4.1.4323.2.6.2.1.1 | qbSonetMediumEntry | QB-SONET-MIB |
| 1.3.6.1.4.1.4323.2.6.2.1.1.4 | qbSonetPortMediumType | QB-SONET-MIB |