All MIBs › PT3080-MIB
Organization: ProTelevision Technologies A/S, Denmark
Last Updated: 2015-06-22
Category: Broadcast and Media
Description: Manages ProTelevision Technologies PT3080 broadcast monitoring equipment configuration, signal analysis, and alarm reporting.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is PT3080-MIB?
PT3080-MIB is a ProTelevision Technologies A/S proprietary MIB (built on PT-MIB) for the PT3080 DVB-T/H modulator. Its objects cover instrument firmware revisions (FW1-4, with bootloader variants), PCB revision, calibration revision/date, a reboot action (and reboot-to-default-config action), system date/time (and sync flag), dual firmware-image versions/installed dates, service LED, language, system type, modulation standard, current active image, instrument Ku-band/type/options. As a status/configuration MIB it lets an administrator confirm firmware image version and modulation configuration on a ProTelevision PT3080 DVB-T/H modulator. It is deployed on ProTelevision Technologies PT3080 DVB-T/H modulators. Engineers can download the PT3080-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in PT3080-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ProTelevision Technologies PT3080 DVB-T/H modulators
Monitoring Examples
An administrator checks pt3080SystemCurrentImage and pt3080SystemModulationStandard to confirm the active firmware image and modulation standard on a ProTelevision PT3080 modulator.
What Can Be Monitored
- firmware image version and modulation configuration
This MIB depends on
Related MIBs
Imported Objects
From PT-MIB
| pt | MODULE-IDENTITY |
From SNMPv2-CONF
| AGENT-CAPABILITIES | |
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| DateAndTime | |
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| pt3080 | 1.3.6.1.4.1.193.223.2.3080 | This is the MIB file of PT3080 DVB-T/H Modulator. Copyright (c) 2008-2015 Protelevision Technologies A/S. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. | ||
| pt3080System | 1.3.6.1.4.1.193.223.2.3080.1 | |||
| STR pt3080SystemInstrumentKU | 1.3.6.1.4.1.193.223.2.3080.1.1 | DisplayString | read-only | The instrument serial number. |
| STR pt3080SystemInstrumentType | 1.3.6.1.4.1.193.223.2.3080.1.2 | DisplayString | read-only | The product type designation. |
| STR pt3080SystemInstrumentSWRev | 1.3.6.1.4.1.193.223.2.3080.1.3 | DisplayString | read-only | The instrument Software Revision currently running. |
| STR pt3080SystemInstrumentBootLoaderRev | 1.3.6.1.4.1.193.223.2.3080.1.4 | DisplayString | read-only | The instrument Bootloader Software Revision. |
| STR pt3080SystemInstrumentKernelRev | 1.3.6.1.4.1.193.223.2.3080.1.5 | DisplayString | read-only | The instrument O/S Kernel Version. |
| STR pt3080SystemInstrumentOptions | 1.3.6.1.4.1.193.223.2.3080.1.6 | DisplayString | read-only | The options installed on this instrument. |
| STR pt3080SystemInstrumentFW1Rev | 1.3.6.1.4.1.193.223.2.3080.1.7 | DisplayString | read-only | The instrument FW1 revision |
| STR pt3080SystemInstrumentFW1RevBL | 1.3.6.1.4.1.193.223.2.3080.1.8 | DisplayString | read-only | The instrument FW1 BL revision |
| STR pt3080SystemInstrumentFW2Rev | 1.3.6.1.4.1.193.223.2.3080.1.9 | DisplayString | read-only | The instrument FW2 revision |
| STR pt3080SystemInstrumentFW2RevBL | 1.3.6.1.4.1.193.223.2.3080.1.10 | DisplayString | read-only | The instrument FW2 BL revision |
| STR pt3080SystemInstrumentFW3Rev | 1.3.6.1.4.1.193.223.2.3080.1.11 | DisplayString | read-only | The instrument FW3 revision |
| STR pt3080SystemInstrumentFW4Rev | 1.3.6.1.4.1.193.223.2.3080.1.12 | DisplayString | read-only | The instrument FW4 revision |
| STR pt3080SystemInstrumentPCBRev | 1.3.6.1.4.1.193.223.2.3080.1.13 | DisplayString | read-only | The instrument PCB revision |
| STR pt3080SystemInstrumentCalibrationRev | 1.3.6.1.4.1.193.223.2.3080.1.14 | DisplayString | read-only | The instrument Calibration revision |
| STR pt3080SystemInstrumentCalibrationDate | 1.3.6.1.4.1.193.223.2.3080.1.15 | DisplayString | read-only | The instrument Calibration date |
| INT pt3080SystemReboot | 1.3.6.1.4.1.193.223.2.3080.1.16 | INTEGER | read-write | Force a reboot of the device on the designated image now. |
| INT pt3080SystemRebootDefaultConfig | 1.3.6.1.4.1.193.223.2.3080.1.19 | INTEGER | read-write | Restore all parameters to factory default and reboot the device on the same image. |
| INT pt3080SystemDateTimeSync | 1.3.6.1.4.1.193.223.2.3080.1.20 | INTEGER | read-write | The method used to synchronize system RTC. Mode auto means use gps if available else ntp else manual. |
| STR pt3080SystemTimezone | 1.3.6.1.4.1.193.223.2.3080.1.21 | DisplayString | read-write | The Time Zone used for displaying Data and Time. |
| STR pt3080SystemDateTime | 1.3.6.1.4.1.193.223.2.3080.1.22 | DisplayString | read-write | The current date/time in local timezone of the device. Format is YYYY MM DD HH MM SS. |
| I32 pt3080SystemCurrentImage | 1.3.6.1.4.1.193.223.2.3080.1.23 | Integer32 | read-only | The flash Image the device is currently booted from. |
| STR pt3080SystemImage0Version | 1.3.6.1.4.1.193.223.2.3080.1.24 | DisplayString | read-only | The image 0 version string. |
| DAT pt3080SystemImage0InstalledDate | 1.3.6.1.4.1.193.223.2.3080.1.25 | DateAndTime | read-only | The date and time image 0 was installed. |
| STR pt3080SystemImage1version | 1.3.6.1.4.1.193.223.2.3080.1.26 | DisplayString | read-only | The image 1 version string. |
| DAT pt3080SystemImage1InstalledDate | 1.3.6.1.4.1.193.223.2.3080.1.27 | DateAndTime | read-only | The date and time image 0 was installed. |
| INT pt3080SystemServiceLED | 1.3.6.1.4.1.193.223.2.3080.1.28 | INTEGER | read-write | Control the Service LED on frontpanel. |
| INT pt3080SystemType | 1.3.6.1.4.1.193.223.2.3080.1.30 | INTEGER | read-write | The system type to start in on next reboot. |
| INT pt3080SystemDateTimeSyncActual | 1.3.6.1.4.1.193.223.2.3080.1.31 | INTEGER | read-only | The actual method used to synchronize system RTC. |
| INT pt3080SystemModulationStandard | 1.3.6.1.4.1.193.223.2.3080.1.32 | INTEGER | read-write | The Modulation Standard to start in on next reboot. |
| INT pt3080SystemLanguage | 1.3.6.1.4.1.193.223.2.3080.1.33 | INTEGER | read-write | Controls which language is used on web and facia. Change requires reboot. |
| I32 pt3080SystemOperationOnTime | 1.3.6.1.4.1.193.223.2.3080.1.34 | Integer32 | read-only | Number of seconds this unit has been turned on since production. |
| I32 pt3080SystemOperationOnAirTime | 1.3.6.1.4.1.193.223.2.3080.1.35 | Integer32 | read-only | Number of seconds this unit has been unmuted since production. |
| I32 pt3080SystemOperationNumberOfBoots | 1.3.6.1.4.1.193.223.2.3080.1.36 | Integer32 | read-only | Number of times this unit has been booted since last factory default restore. |
| I32 pt3080SystemBackplaneid | 1.3.6.1.4.1.193.223.2.3080.1.40 | Integer32 | read-only | ID of the backplane the device is plugged into |
| I32 pt3080SystemBackplaneIdRaw | 1.3.6.1.4.1.193.223.2.3080.1.41 | Integer32 | read-only | Raw ID of the backplane the device is plugged into |
| I32 pt3080SystemBackplaneIdPcb | 1.3.6.1.4.1.193.223.2.3080.1.42 | Integer32 | read-only | PCB version of the backplane the device is plugged into |
| I32 pt3080SystemBackplaneIdCableOptions | 1.3.6.1.4.1.193.223.2.3080.1.43 | Integer32 | read-only | Cable options of the backplane the device is plugged into |
| STR pt3080SystemBackplaneIdMAnuf | 1.3.6.1.4.1.193.223.2.3080.1.44 | DisplayString | read-only | Manufacture ID of the backplane the device is plugged into |
| STR pt3080SystemBackplaneCalibrationDate | 1.3.6.1.4.1.193.223.2.3080.1.45 | DisplayString | read-only | Calibration date of the backplane the device is plugged into |
| I32 pt3080SystemBackplaneCalibrationSw | 1.3.6.1.4.1.193.223.2.3080.1.46 | Integer32 | read-only | Calibration SW version of the backplane the device is plugged into |
| I32 pt3080SystemBackplaneIdPartlist | 1.3.6.1.4.1.193.223.2.3080.1.47 | Integer32 | read-only | Partlist version of the backplane the device is plugged into |
| pt3080SystemScheduledActionTable | 1.3.6.1.4.1.193.223.2.3080.1.50 | not-accessible | This table contains the scheduled actions | |
| pt3080SystemScheduledActionEntry | 1.3.6.1.4.1.193.223.2.3080.1.50.1 | not-accessible | An entry for the scheduled action | |
| I32 pt3080SystemScheduledActionID | 1.3.6.1.4.1.193.223.2.3080.1.50.1.1 | Integer32 | not-accessible | Unique ID for this scheduled action entry |
| INT pt3080SystemScheduledActionRecurrence | 1.3.6.1.4.1.193.223.2.3080.1.50.1.2 | INTEGER | read-write | The interval at which this scheduled action entry will be executed |
| I32 pt3080SystemScheduledActionHour | 1.3.6.1.4.1.193.223.2.3080.1.50.1.3 | Integer32 | read-write | The recurrence hour used when pt3080SystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly. |
| I32 pt3080SystemScheduledActionMinute | 1.3.6.1.4.1.193.223.2.3080.1.50.1.4 | Integer32 | read-write | The recurrence minute used when pt3080SystemScheduledActionRecurrence is once, hourly, dayly, weekly and monthly. |
| INT pt3080SystemScheduledActionWeekday | 1.3.6.1.4.1.193.223.2.3080.1.50.1.5 | INTEGER | read-write | The recurrence weekday used when pt3080SystemScheduledActionRecurrence is weekly. |
| I32 pt3080SystemScheduledActionMonthDay | 1.3.6.1.4.1.193.223.2.3080.1.50.1.6 | Integer32 | read-write | The recurrence day of the monthe used when pt3080SystemScheduledActionRecurrence is monthly. |
| STR pt3080SystemScheduledActionDate | 1.3.6.1.4.1.193.223.2.3080.1.50.1.7 | DisplayString | read-write | The recurrence date used when pt3080SystemScheduledActionRecurrence is once. The format is dd/mm/yyyy. |
| I32 pt3080SystemScheduledActionRandomDelay | 1.3.6.1.4.1.193.223.2.3080.1.50.1.8 | Integer32 | read-write | An extra random delay added before the action for this entry is executed. A setting of x means that a random delay between 0 and x seconds are added. |
| INT pt3080SystemScheduledActionAction | 1.3.6.1.4.1.193.223.2.3080.1.50.1.9 | INTEGER | read-write | The action for this entry is executed |
| INT pt3080SystemScheduledActionRepeaterMode | 1.3.6.1.4.1.193.223.2.3080.1.50.1.10 | INTEGER | read-write | The new repeater mode to change to when pt3080SystemScheduledActionAction of type repeatermode is executed |
| INT pt3080SystemScheduledActionPresetNo | 1.3.6.1.4.1.193.223.2.3080.1.50.1.11 | INTEGER | read-write | The preset to load when pt3080SystemScheduledActionAction of type preset is executed |
| INT pt3080SystemScheduledActionRebootImage | 1.3.6.1.4.1.193.223.2.3080.1.50.1.12 | INTEGER | read-write | The image to reboot to when pt3080SystemScheduledActionAction of type reboot is executed |
| INT pt3080SystemScheduledActionRebootSystemType | 1.3.6.1.4.1.193.223.2.3080.1.50.1.13 | INTEGER | read-write | The system type to reboot to when pt3080SystemScheduledActionAction of type reboot is executed |
| INT pt3080SystemScheduledActionMute | 1.3.6.1.4.1.193.223.2.3080.1.50.1.14 | INTEGER | read-write | The mute mode to change into when pt3080SystemScheduledActionAction of type mute is executed |
| INT pt3080SystemScheduledActionSWUpgradeProtocol | 1.3.6.1.4.1.193.223.2.3080.1.50.1.15 | INTEGER | read-write | The protocol to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed |
| STR pt3080SystemScheduledActionSWUpgradeUsername | 1.3.6.1.4.1.193.223.2.3080.1.50.1.16 | DisplayString | read-write | The username to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed |
| STR pt3080SystemScheduledActionSWUpgradePassword | 1.3.6.1.4.1.193.223.2.3080.1.50.1.17 | DisplayString | read-write | The password to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed |
| STR pt3080SystemScheduledActionSWUpgradeImageServer | 1.3.6.1.4.1.193.223.2.3080.1.50.1.18 | DisplayString | read-write | The server name to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed |
| STR pt3080SystemScheduledActionSWUpgradeImagePath | 1.3.6.1.4.1.193.223.2.3080.1.50.1.19 | DisplayString | read-write | The image path name to use into when pt3080SystemScheduledActionAction of type swupgrade(3) is executed |
| pt3080Mode | 1.3.6.1.4.1.193.223.2.3080.2 | |||
| INT pt3080ModeNetwork | 1.3.6.1.4.1.193.223.2.3080.2.1 | INTEGER | read-write | Network mode multi-frequency-network or single-frequency-network |
| INT pt3080ModeHierarchy | 1.3.6.1.4.1.193.223.2.3080.2.2 | INTEGER | read-write | Hierarchy mode. Cannot be set if pt3080ModeMipControl is on(1). |
| INT pt3080Modeifft | 1.3.6.1.4.1.193.223.2.3080.2.3 | INTEGER | read-write | IFFT 2k, 4k or 8k mode. Cannot be set if pt3080ModeMipControl is on(1). |
| INT pt3080ModeCodeRateHighPrio | 1.3.6.1.4.1.193.223.2.3080.2.4 | INTEGER | read-write | High Priority Code Rate. Cannot be set if pt3080ModeMipControl is on(1). |
| INT pt3080ModeCodeRateLowPrio | 1.3.6.1.4.1.193.223.2.3080.2.5 | INTEGER | read-write | Low Priority Code Rate. Cannot be set if pt3080ModeMipControl is on(1). |
| INT pt3080ModeConstellation | 1.3.6.1.4.1.193.223.2.3080.2.6 | INTEGER | read-write | If QPSK is selected and Hierarchical is <> NONE, then Hierarchical will be forced to NONE. Cannot be set if pt3080ModeMipControl is on(1). |
| INT pt3080ModeGuardInterval | 1.3.6.1.4.1.193.223.2.3080.2.7 | INTEGER | read-write | Guard Interval. Cannot be set if pt3080ModeMipControl is on(1). |
| I32 pt3080ModeCellID | 1.3.6.1.4.1.193.223.2.3080.2.8 | Integer32 | read-write | Sets the Cell ID value. Cannot be set if pt3080ModeMipControl is on(1). |
| INT pt3080ModeEnableCellID | 1.3.6.1.4.1.193.223.2.3080.2.9 | INTEGER | read-write | Enables Cell ID in the TPS information. Cannot be set if pt3080ModeMipControl is on(1). Cannot be set to off(0) if pt3080ModeEnableDVBH is on(1) |
| INT pt3080ModeDeepInterleaver | 1.3.6.1.4.1.193.223.2.3080.2.10 | INTEGER | read-write | Enables Deep Interleaver. Cannot be set if pt3080ModeMipControl is on(1). |
| INT pt3080ModeEnableDVBH | 1.3.6.1.4.1.193.223.2.3080.2.11 | INTEGER | read-write | Enables DVB-H mode |
| INT pt3080ModeMpeFecLowPrio | 1.3.6.1.4.1.193.223.2.3080.2.12 | INTEGER | read-write | Enables MPE Fec Low Priority. Cannot be set if pt3080ModeMipControl is on(1). |
| INT pt3080ModeMpeFecHighPrio | 1.3.6.1.4.1.193.223.2.3080.2.13 | INTEGER | read-write | Enables MPE Fec High Priority. Cannot be set if pt3080ModeMipControl is on(1). |
| INT pt3080ModeTimeSlicingLowPrio | 1.3.6.1.4.1.193.223.2.3080.2.14 | INTEGER | read-write | Enables timeslicing High Priority. Cannot be set if pt3080ModeMipControl is on(1). |
| INT pt3080ModeTimeSlicingHighPrio | 1.3.6.1.4.1.193.223.2.3080.2.15 | INTEGER | read-write | Enables timeslicing High Priority. Cannot be set if pt3080ModeMipControl is on(1). |
| I32 pt3080ModeSfnDelayOffset | 1.3.6.1.4.1.193.223.2.3080.2.16 | Integer32 | read-write | SFN delay offset |
| I32 pt3080ModeTxIdent | 1.3.6.1.4.1.193.223.2.3080.2.17 | Integer32 | read-write | The transport stream control identifier |
| INT pt3080ModeMipControl | 1.3.6.1.4.1.193.223.2.3080.2.18 | INTEGER | read-write | Enables transport stream control of modulator |
| INT pt3080ModeMfnKeepNullPackets | 1.3.6.1.4.1.193.223.2.3080.2.19 | INTEGER | read-write | Enables MFN mode keep null packets option |
| I32 pt3080ModeNetworkDelayHP | 1.3.6.1.4.1.193.223.2.3080.2.20 | Integer32 | read-only | Current network delay of HP TS |
| I32 pt3080ModeNetworkDelayMinHP | 1.3.6.1.4.1.193.223.2.3080.2.21 | Integer32 | read-only | Minimum network delay of HP TS seen since last reset |
| I32 pt3080ModeNetworkDelayMaxHP | 1.3.6.1.4.1.193.223.2.3080.2.22 | Integer32 | read-only | Maximum network delay of HP TS seen since last reset |
| I32 pt3080ModeMaxNetworkDelayHP | 1.3.6.1.4.1.193.223.2.3080.2.23 | Integer32 | read-only | Maximum allowed network delay, as received from MIP |
| I32 pt3080ModeNetworkDelayMarginHP | 1.3.6.1.4.1.193.223.2.3080.2.24 | Integer32 | read-only | Difference between Actual Network Delay and Max. Allowed Network Delay |
| I32 pt3080ModeNetworkDelayLP | 1.3.6.1.4.1.193.223.2.3080.2.25 | Integer32 | read-only | Current network delay of LP TS |
| I32 pt3080ModeNetworkDelayMinLP | 1.3.6.1.4.1.193.223.2.3080.2.26 | Integer32 | read-only | Minimum network delay of LP TS seen since last reset |
| I32 pt3080ModeNetworkDelayMaxLP | 1.3.6.1.4.1.193.223.2.3080.2.27 | Integer32 | read-only | Maximum network delay of LP TS seen since last reset |
| I32 pt3080ModeMaxNetworkDelayLP | 1.3.6.1.4.1.193.223.2.3080.2.28 | Integer32 | read-only | Maximum allowed network delay, as received from MIP |
| I32 pt3080ModeNetworkDelayMarginLP | 1.3.6.1.4.1.193.223.2.3080.2.29 | Integer32 | read-only | Difference between Actual Network Delay and Max. Allowed Network Delay |
| INT pt3080ModeNetworkDelayReset | 1.3.6.1.4.1.193.223.2.3080.2.30 | INTEGER | read-write | Reset network delay. Always reads back as noop(0) |
| I32 pt3080ModeDefaultMIPOutputPower | 1.3.6.1.4.1.193.223.2.3080.2.31 | Integer32 | read-write | Default MIP value for Output Power Level. Cannot be set if pt3080ModeMipControlOutputPower is on(1) |
| I32 pt3080ModeDefaultMIPOutputTimeOffset | 1.3.6.1.4.1.193.223.2.3080.2.32 | Integer32 | read-write | Default MIP value for Output SFN Time Offset. Cannot be set if pt3080ModeMipControlOutputTimeOffset is on(1) |
| I32 pt3080ModeDefaultMIPOutputCellID | 1.3.6.1.4.1.193.223.2.3080.2.33 | Integer32 | read-write | Default MIP value for Output Cell ID. Cannot be set if pt3080ModeMipControlOutputCellId is on(1) |
| I32 pt3080ModeDefaultMIPOutputFreqOffset | 1.3.6.1.4.1.193.223.2.3080.2.34 | Integer32 | read-write | Default MIP value for Output frequency Offset. Cannot be set if pt3080ModeMipControlOutputFreqOffset is on(1) |
| I32 pt3080ModeMIPMaxSFNDelay | 1.3.6.1.4.1.193.223.2.3080.2.35 | Integer32 | read-only | The MIP value for SFN maximum delay |
| INT pt3080ModeMipControlOutputPower | 1.3.6.1.4.1.193.223.2.3080.2.36 | INTEGER | read-write | Enables transport stream control of ModeDefaultMIPOutputPower |
| INT pt3080ModeMipControlOutputTimeOffset | 1.3.6.1.4.1.193.223.2.3080.2.37 | INTEGER | read-write | Enables transport stream control of ModeDefaultMIPOutputTimeOffset |
| INT pt3080ModeMipControlOutputCellId | 1.3.6.1.4.1.193.223.2.3080.2.38 | INTEGER | read-write | Enables transport stream control of ModeDefaultMIPOutputCellId |
| INT pt3080ModeMipControlOutputFreqOffset | 1.3.6.1.4.1.193.223.2.3080.2.39 | INTEGER | read-write | Enables transport stream control of ModeDefaultMIPOutputFreqOffset |
| INT pt3080ModeListenBroadcast | 1.3.6.1.4.1.193.223.2.3080.2.40 | INTEGER | read-write | Control wheter to react on broadcast tx id. |
| pt3080Input | 1.3.6.1.4.1.193.223.2.3080.3 | |||
| INT pt3080InputRefDirection | 1.3.6.1.4.1.193.223.2.3080.3.1 | INTEGER | read-write | monitors the Reference signal direction. state: - inputOutput[inputOutput_INPUT] - inputOutput[inputOutput_OUTPUT] |
| INT pt3080InputRefSource | 1.3.6.1.4.1.193.223.2.3080.3.2 | INTEGER | read-write | Defines the input reference synchronisation source. If the value AUTO is chosen, the source is chosen automatically between available sources. The order of choice is GPS->EXT10MHz->INT. If the value EXT is chosen, the external clock is chosen as source If the value INT is chosen, the internal clock is chosen as source. If the value GPS is chosen, the GNSS 1PPS clock is chosen as source. |
| INT pt3080InputRef10MhzImpedance | 1.3.6.1.4.1.193.223.2.3080.3.3 | INTEGER | read-write | Defines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance. |
| INT pt3080InputRef1PPSImpedance | 1.3.6.1.4.1.193.223.2.3080.3.4 | INTEGER | read-write | Defines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance. |
| INT pt3080InputRef1PPSTrigSlope | 1.3.6.1.4.1.193.223.2.3080.3.5 | INTEGER | read-write | Defines the trigger edge of the external 1PPS input reference clock. The value is either RISING or FALLING. |
| I32 pt3080InputRef1PPSTrigLevel | 1.3.6.1.4.1.193.223.2.3080.3.6 | Integer32 | read-write | Defines the trigger level of the external 1PPS input reference clock |
| I32 pt3080InputRef10MhzHoldoverDelay | 1.3.6.1.4.1.193.223.2.3080.3.7 | Integer32 | read-write | Defines the external 10 MHz input reference synchronisation source impedance. The value is either 50O or high impedance. |
| INT pt3080InputRef10MhzHoldoverForever | 1.3.6.1.4.1.193.223.2.3080.3.8 | INTEGER | read-write | The holdover delay for input reference source 10MHz failure is forever |
| I32 pt3080InputRef1PPSHoldoverDelay | 1.3.6.1.4.1.193.223.2.3080.3.9 | Integer32 | read-write | Defines the external 1 PPS input reference synchronisation source impedance. The value is either 50ohm or high impedance. |
| INT pt3080InputRef1PPSHoldoverForever | 1.3.6.1.4.1.193.223.2.3080.3.10 | INTEGER | read-write | The holdover delay for input reference source 1 pps failure is forever |
| INT pt3080InputRefStatus | 1.3.6.1.4.1.193.223.2.3080.3.11 | INTEGER | read-only | returns the current input reference synchronisation source. |
| INT pt3080InputASITSPrimarySource | 1.3.6.1.4.1.193.223.2.3080.3.12 | INTEGER | read-write | The TS-Primary input source connector selected |
| INT pt3080InputASITSSecondarySource | 1.3.6.1.4.1.193.223.2.3080.3.13 | INTEGER | read-write | The TS-Secondary input source connector selected |
| INT pt3080InputASIAutoRoutingPolicy | 1.3.6.1.4.1.193.223.2.3080.3.14 | INTEGER | read-write | The policy to use for TS auto routing |
| I32 pt3080InputASIAutoRoutingDelayHp2Lp | 1.3.6.1.4.1.193.223.2.3080.3.15 | Integer32 | read-write | The delay before performing the actual substitution where TS-Primary -> TS-LP and TS-Secondary -> TS-HP |
| I32 pt3080InputASIAutoRoutingDelayLp2Hp | 1.3.6.1.4.1.193.223.2.3080.3.16 | Integer32 | read-write | The delay before performing the actual substitution where TS-Primary -> TS-HP and TS-Secondary -> TS-LP |
| I32 pt3080InputASIHoldoverTimeout | 1.3.6.1.4.1.193.223.2.3080.3.17 | Integer32 | read-write | The time ASI Holdover will be active, if seamless ASI switching is not possible |
| I32 pt3080InputTSPrimaryMaxPATDelay | 1.3.6.1.4.1.193.223.2.3080.3.18 | Integer32 | read-write | The Max delay between the Program Association Table (PAT) on the incomming transport stream. |
| INT pt3080InputTSPrimaryMaxPATDelayEnable | 1.3.6.1.4.1.193.223.2.3080.3.19 | INTEGER | read-write | Enables TS switching if the Max delay between PAT table updates has been exceeded. |
| I32 pt3080InputTSPrimaryExpectedTSID | 1.3.6.1.4.1.193.223.2.3080.3.20 | Integer32 | read-write | The TS-ID value expected on the incoming TS stream. |
| INT pt3080InputTSPrimaryExpectedTSIDEnable | 1.3.6.1.4.1.193.223.2.3080.3.21 | INTEGER | read-write | Enables TS switching if the TS-ID is not the expected value. |
| I32 pt3080InputTSPrimaryExpectedNWID | 1.3.6.1.4.1.193.223.2.3080.3.22 | Integer32 | read-write | The NW-ID value expected on the incoming TS stream. |
| INT pt3080InputTSPrimaryExpectedNWIDEnable | 1.3.6.1.4.1.193.223.2.3080.3.23 | INTEGER | read-write | Enables TS switching if the NW-ID is not the expected value. |
| I32 pt3080InputTSPrimaryMaxStuffingrate | 1.3.6.1.4.1.193.223.2.3080.3.24 | Integer32 | read-write | The expected stuffing rate on the incoming TS stream. |
| INT pt3080InputTSPrimaryMaxStuffingrateEnable | 1.3.6.1.4.1.193.223.2.3080.3.25 | INTEGER | read-write | Enables TS switching if the Stuffing rate is over the expected value. |
| I32 pt3080InputTSPrimaryMaxStsJitter | 1.3.6.1.4.1.193.223.2.3080.3.26 | Integer32 | read-write | The Max STS jitter on the TS-Primary |
| I32 pt3080InputTSSecondaryMaxPATDelay | 1.3.6.1.4.1.193.223.2.3080.3.27 | Integer32 | read-write | The Max delay between the Program Association Table (PAT) on the incomming transport stream. |
| INT pt3080InputTSSecondaryMaxPATDelayEnable | 1.3.6.1.4.1.193.223.2.3080.3.28 | INTEGER | read-write | Enables TS switching if the Max delay between PAT table updates has been exceeded. |
| I32 pt3080InputTSSecondaryExpectedTSID | 1.3.6.1.4.1.193.223.2.3080.3.29 | Integer32 | read-write | The TS-ID value expected on the incoming TS stream. |
| INT pt3080InputTSSecondaryExpectedTSIDEnable | 1.3.6.1.4.1.193.223.2.3080.3.30 | INTEGER | read-write | Enables TS switching if the TS-ID is not the expected value. |
| I32 pt3080InputTSSecondaryExpectedNWID | 1.3.6.1.4.1.193.223.2.3080.3.31 | Integer32 | read-write | The NW-ID value expected on the incoming TS stream. |
| INT pt3080InputTSSecondaryExpectedNWIDEnable | 1.3.6.1.4.1.193.223.2.3080.3.32 | INTEGER | read-write | Enables TS switching if the NW-ID is not the expected value. |
| I32 pt3080InputTSSecondaryMaxStuffingrate | 1.3.6.1.4.1.193.223.2.3080.3.33 | Integer32 | read-write | The expected stuffing rate on the incoming TS stream. |
| INT pt3080InputTSSecondaryMaxStuffingrateEnable | 1.3.6.1.4.1.193.223.2.3080.3.34 | INTEGER | read-write | Enables TS switching if the Stuffing rate is over the expected value. |
| I32 pt3080InputTSSecondaryMaxStsJitter | 1.3.6.1.4.1.193.223.2.3080.3.35 | Integer32 | read-write | The Max STS jitter on the TS-Secondary |
| INT pt3080InputTSPrimaryStatus | 1.3.6.1.4.1.193.223.2.3080.3.36 | INTEGER | read-only | The current state for TS-Primary. Unavailable means violation of alarms. |
| INT pt3080InputTSSecondaryStatus | 1.3.6.1.4.1.193.223.2.3080.3.37 | INTEGER | read-only | The current state for TS-Secondary. Unavailable means violation of alarms. |
| INT pt3080InputTSHp | 1.3.6.1.4.1.193.223.2.3080.3.38 | INTEGER | read-only | The input source currently On Air. (TS-HP) |
| INT pt3080InputTSLp | 1.3.6.1.4.1.193.223.2.3080.3.39 | INTEGER | read-only | The input source currently used as backup. (TS-LP) |
| INT pt3080InputEffectiveAutoroutingPolicy | 1.3.6.1.4.1.193.223.2.3080.3.40 | INTEGER | read-only | Reflects the effective ASI Autorouting Policy |
| I32 pt3080InputTSHpBitrate | 1.3.6.1.4.1.193.223.2.3080.3.41 | Integer32 | read-only | Current bitrate for On Air TS. (TS-HP) |
| I32 pt3080InputTSHpPacketsBuffered | 1.3.6.1.4.1.193.223.2.3080.3.42 | Integer32 | read-only | Current number of packets buffered for On Air TS (TS-HP) |
| I32 pt3080InputTSHpPacketSize | 1.3.6.1.4.1.193.223.2.3080.3.43 | Integer32 | read-only | Current size of packets for On Air TS (TS-HP) |
| I32 pt3080InputTSHpStuffingrate | 1.3.6.1.4.1.193.223.2.3080.3.44 | Integer32 | read-only | Current NULL stuffing as a percentage of the current bitrate for On Air TS (TS-HP) |
| I32 pt3080InputTSHpTSID | 1.3.6.1.4.1.193.223.2.3080.3.45 | Integer32 | read-only | Current Transport Stream ID for On Air TS. (TS-HP) |
| I32 pt3080InputTSHpNWID | 1.3.6.1.4.1.193.223.2.3080.3.46 | Integer32 | read-only | Current Network ID for On Air TS. (TS-HP) |
| I32 pt3080InputTSLpBitrate | 1.3.6.1.4.1.193.223.2.3080.3.47 | Integer32 | read-only | Current bitrate for Backup TS. (TS-LP) |
| I32 pt3080InputTSLpPacketsBuffered | 1.3.6.1.4.1.193.223.2.3080.3.48 | Integer32 | read-only | Current number of packets buffered for Backup TS. (TS-LP) |
| I32 pt3080InputTSLpPacketSize | 1.3.6.1.4.1.193.223.2.3080.3.49 | Integer32 | read-only | Current size of packets for Backup TS. (TS-LP) |
| I32 pt3080InputTSLpStuffingrate | 1.3.6.1.4.1.193.223.2.3080.3.50 | Integer32 | read-only | Current NULL stuffing as a percentage of the current bitrate for Backup TS. (TS-LP) |
| I32 pt3080InputTSLpTSID | 1.3.6.1.4.1.193.223.2.3080.3.51 | Integer32 | read-only | Current Transport Stream ID for Backup TS. (TS-LP) |
| I32 pt3080InputTSLpNWID | 1.3.6.1.4.1.193.223.2.3080.3.52 | Integer32 | read-only | Current Network ID for Backup TS. (TS-LP) |
| I32 pt3080InputTSPrimaryStsJitter | 1.3.6.1.4.1.193.223.2.3080.3.53 | Integer32 | read-only | Current STS jitter on the TS-Primary. |
| I32 pt3080InputTSPrimaryStsJitterMax | 1.3.6.1.4.1.193.223.2.3080.3.54 | Integer32 | read-only | The Maximum STS jitter value seen on the TS-Primary |
| I32 pt3080InputTSPrimaryStsJitterMin | 1.3.6.1.4.1.193.223.2.3080.3.55 | Integer32 | read-only | The minimum STS jitter value seen on the TS-Primary |
| INT pt3080InputTSPrimaryStsJitterReset | 1.3.6.1.4.1.193.223.2.3080.3.56 | INTEGER | read-write | Reset the pt3080InputTSPrimaryStsJitterMax and pt3080InputTSPrimaryStsJitterMin values |
| I32 pt3080InputTSSecondaryStsJitter | 1.3.6.1.4.1.193.223.2.3080.3.57 | Integer32 | read-only | Current STS jitter on the TS-Secondary |
| I32 pt3080InputTSSecondaryStsJitterMax | 1.3.6.1.4.1.193.223.2.3080.3.58 | Integer32 | read-only | The Maximum STS jitter value seen on the TS-Secondary |
| I32 pt3080InputTSSecondaryStsJitterMin | 1.3.6.1.4.1.193.223.2.3080.3.59 | Integer32 | read-only | The minimum STS jitter value seen on the TS-Secondary |
| INT pt3080InputTSSecondaryStsJitterReset | 1.3.6.1.4.1.193.223.2.3080.3.60 | INTEGER | read-write | Reset the pt3080InputTSSecondaryStsJitterMax and pt3080InputTSSecondaryStsJitterMin values |
| I32 pt3080InputTSPrimaryMinDelaymargin | 1.3.6.1.4.1.193.223.2.3080.3.64 | Integer32 | read-write | The minimum delay margin of the incoming TS stream. |
| INT pt3080InputTSPrimaryMinDelaymarginEnable | 1.3.6.1.4.1.193.223.2.3080.3.65 | INTEGER | read-write | Enables TS switching if the Minimum Delay margin is not according to the expected value. |
| I32 pt3080InputTSSecondaryMinDelaymargin | 1.3.6.1.4.1.193.223.2.3080.3.66 | Integer32 | read-write | The minimum delay margin of the incoming TS stream. |
| INT pt3080InputTSSecondaryMinDelaymarginEnable | 1.3.6.1.4.1.193.223.2.3080.3.67 | INTEGER | read-write | Enables TS switching if the Minimum Delay margin is not according to the expected value. |
| I32 pt3080InputTSPrimaryMaxMissingmip | 1.3.6.1.4.1.193.223.2.3080.3.68 | Integer32 | read-write | The maximum seconds of missing mip information from the incoming TS stream. |
| INT pt3080InputTSPrimaryMaxMissingmipEnable | 1.3.6.1.4.1.193.223.2.3080.3.69 | INTEGER | read-write | Enables TS switching if the Maximum missing mip is not according to the expected value. |
| I32 pt3080InputTSSecondaryMaxMissingmip | 1.3.6.1.4.1.193.223.2.3080.3.73 | Integer32 | read-write | The maximum seconds of missing mip information from the incoming TS stream. |
| INT pt3080InputTSSecondaryMaxMissingmipEnable | 1.3.6.1.4.1.193.223.2.3080.3.74 | INTEGER | read-write | Enables TS switching if the Maximum missing mip is not according to the expected value. |
| INT pt3080InputRefDevType | 1.3.6.1.4.1.193.223.2.3080.3.90 | INTEGER | read-only | Type of TCXO/OCXO |
| STR pt3080InputRefCalDate | 1.3.6.1.4.1.193.223.2.3080.3.91 | DisplayString | read-only | Calibration Date |
| I32 pt3080InputRefCalVer | 1.3.6.1.4.1.193.223.2.3080.3.92 | Integer32 | read-only | Calibration SW Version |
| pt3080Output | 1.3.6.1.4.1.193.223.2.3080.4 | |||
| INT pt3080OutputMode | 1.3.6.1.4.1.193.223.2.3080.4.1 | INTEGER | read-write | Control RF output mode |
| I32 pt3080OutputRfFrequency | 1.3.6.1.4.1.193.223.2.3080.4.2 | Integer32 | read-write | Output RF frequency |
| I32 pt3080OutputRfLevel | 1.3.6.1.4.1.193.223.2.3080.4.3 | Integer32 | read-write | Sets the output level in 0.01dB steps, 0dB is +6dBm on IF, 0dBm on RF |
| I32 pt3080OutputBandwidth | 1.3.6.1.4.1.193.223.2.3080.4.4 | Integer32 | read-write | Output Bandwidth |
| I32 pt3080OutputChannel | 1.3.6.1.4.1.193.223.2.3080.4.5 | Integer32 | read-write | Channel settings |
| INT pt3080OutputSynchronized | 1.3.6.1.4.1.193.223.2.3080.4.6 | INTEGER | read-only | The values of pt3080OutputRfFrequency, pt3080OutputBandwidth and pt3080OutputChannel are synchronized aaccording to freq = (bw * channel) + 306000000. |
| INT pt3080OutputMute | 1.3.6.1.4.1.193.223.2.3080.4.7 | INTEGER | read-write | Output mute. When set the mute reason UserRequest is ORed into the mute reason set. When read it is the logical OR of all mute reasons |
| INT pt3080OutputPolarity | 1.3.6.1.4.1.193.223.2.3080.4.8 | INTEGER | read-write | Control RF output polarity |
| I32 pt3080OutputPowerLevel | 1.3.6.1.4.1.193.223.2.3080.4.9 | Integer32 | read-write | The desired output power level. |
| I32 pt3080OutputRfFrequencyOffset | 1.3.6.1.4.1.193.223.2.3080.4.10 | Integer32 | read-write | Output RF frequency offset |
| INT pt3080OutputIfEnable | 1.3.6.1.4.1.193.223.2.3080.4.13 | INTEGER | read-write | Control IF output |
| I32 pt3080OutputIfFrequency | 1.3.6.1.4.1.193.223.2.3080.4.14 | Integer32 | read-write | Output Frequency for I/F |
| INT pt3080OutputIfPolarity | 1.3.6.1.4.1.193.223.2.3080.4.15 | INTEGER | read-write | Control IF output polarity |
| I32 pt3080OutputIfLevel | 1.3.6.1.4.1.193.223.2.3080.4.16 | Integer32 | read-write | Output Level for I/F |
| I32 pt3080OutputEffectiveLevel | 1.3.6.1.4.1.193.223.2.3080.4.17 | Integer32 | read-only | Effective RF Output Level |
| I32 pt3080OutputActualLevel | 1.3.6.1.4.1.193.223.2.3080.4.18 | Integer32 | read-only | Actual RF Output Level |
| I32 pt3080OutputRfDetectedActualLevel | 1.3.6.1.4.1.193.223.2.3080.4.19 | Integer32 | read-only | Detected Output Level for RF |
| I32 pt3080OutputRfDetectedLowerLevelLimit | 1.3.6.1.4.1.193.223.2.3080.4.20 | Integer32 | read-write | Limit to how much lower the detected RF output level can be than the configured level. |
| INT pt3080OutputRfDetectedLowerLevelcontrol | 1.3.6.1.4.1.193.223.2.3080.4.21 | INTEGER | read-write | Controls whether the lower limit for RF output level is enforced. |
| I32 pt3080OutputRfDetectedHigherLevelLimit | 1.3.6.1.4.1.193.223.2.3080.4.22 | Integer32 | read-write | Limit to how much higher the detected RF output level can be than the configured level. |
| INT pt3080OutputRfDetectedHigherLevelcontrol | 1.3.6.1.4.1.193.223.2.3080.4.23 | INTEGER | read-write | Controls whether the higher limit for RF output level is enforced. |
| INT pt3080OutputRfAlcControl | 1.3.6.1.4.1.193.223.2.3080.4.30 | INTEGER | read-write | Controls whether the ALC system is enabled or disabled. |
| INT pt3080OutputRfAlcSense | 1.3.6.1.4.1.193.223.2.3080.4.31 | INTEGER | read-write | Controls which sense port is used by the ALC system if the ALC is enabled. |
| I32 pt3080OutputRfAlcSetpointPort1 | 1.3.6.1.4.1.193.223.2.3080.4.32 | Integer32 | read-write | ALC setpoint for RF Sense Port 1 |
| I32 pt3080OutputRfAlcSetpointPort2 | 1.3.6.1.4.1.193.223.2.3080.4.33 | Integer32 | read-write | ALC setpoint for RF Sense Port 2 |
| INT pt3080OutputRfAlcStatus | 1.3.6.1.4.1.193.223.2.3080.4.34 | INTEGER | read-only | Status for whether the ALC system is enabled or disabled. |
| STR pt3080OutputRfAlcStatusInformation | 1.3.6.1.4.1.193.223.2.3080.4.35 | DisplayString | read-only | Information on the state of the ALC system. |
| INT pt3080OutputRfCableMode | 1.3.6.1.4.1.193.223.2.3080.4.50 | INTEGER | read-write | Control whether Cable Level loss compensation should be enabled |
| I32 pt3080OutputRfCableConstantLevelOffset | 1.3.6.1.4.1.193.223.2.3080.4.51 | Integer32 | read-write | Constant level offset to add to RF Output level. Only used if mode is Constant. |
| I32 pt3080OutputRfCableFrequencyLevelOffset0 | 1.3.6.1.4.1.193.223.2.3080.4.52 | Integer32 | read-write | Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic. |
| I32 pt3080OutputRfCableFrequencyLevelOffset1 | 1.3.6.1.4.1.193.223.2.3080.4.53 | Integer32 | read-write | Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic. |
| I32 pt3080OutputRfCableFrequencyLevelOffset2 | 1.3.6.1.4.1.193.223.2.3080.4.54 | Integer32 | read-write | Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic. |
| I32 pt3080OutputRfCableFrequencyLevelOffset3 | 1.3.6.1.4.1.193.223.2.3080.4.55 | Integer32 | read-write | Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic. |
| I32 pt3080OutputRfCableFrequencyLevelOffset4 | 1.3.6.1.4.1.193.223.2.3080.4.56 | Integer32 | read-write | Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic. |
| I32 pt3080OutputRfCableFrequencyLevelOffset5 | 1.3.6.1.4.1.193.223.2.3080.4.57 | Integer32 | read-write | Frequency depedent level offset to add to RF Output level. Only used if mode is Automatic. |
| pt3080Gps | 1.3.6.1.4.1.193.223.2.3080.7 | |||
| INT pt3080Gps1PPSStatus | 1.3.6.1.4.1.193.223.2.3080.7.1 | INTEGER | read-only | Returns the current locking state of the GPS system. The value LOCKED indicates that the GPS system is locked to a sufficient number of satellites to perform well. UNLOCKED indicates that it is not. For the GPS system to perform well at least 4 satellites must be visible with a proper signal to noise ratio. |
| I32 pt3080GpsVisibleSatellites | 1.3.6.1.4.1.193.223.2.3080.7.2 | Integer32 | read-only | Returns the number of currently visible satellites via the built-in GPS receiver. A satellite is visible if at all detectable by the GPS system i.e. regardless of signal to noise ratio. Note that the upper value N can change with the launch of new satellites. For some time, however, the GPS system has had a total of 24 satellites. |
| I32 pt3080GpsTrackedSatellites | 1.3.6.1.4.1.193.223.2.3080.7.3 | Integer32 | read-only | Returns the number of currently tracked satellites via the GPS receiver. |
| INT pt3080GpsBias | 1.3.6.1.4.1.193.223.2.3080.7.4 | INTEGER | read-write | Defines the bias to be either on or off for the GPS antenna DC supply (5V or 3V DC). An active GPS antenna requires a power supply i.e. requires this parameter to set to ON. |
| STR pt3080GpsLongtitude | 1.3.6.1.4.1.193.223.2.3080.7.6 | DisplayString | read-only | Returns - as a string - the current longtitude derived from the received GPS signal(s). The string format is DDD MM SS C. according to the following: - DD denotes degrees in the intervals [0 .. 180]. MM and SS denote minutes/seconds in the interval [0 .. 59]. C denotes E, W (East, West). |
| STR pt3080GpsLatitude | 1.3.6.1.4.1.193.223.2.3080.7.7 | DisplayString | read-only | Returns - as a string - the current latitude derived from the received GPS signal(s). The string format is DD MM SS C. according to the following: - DD denotes degrees in the intervals [0 .. 90]. MM and SS denote minutes/seconds in the interval [0 .. 59]. C denotes N, S (North, South). |
| STR pt3080GpsAltitude | 1.3.6.1.4.1.193.223.2.3080.7.8 | DisplayString | read-only | Returns - as a string - the current altitude derived from the received GPS signal(s). The string format is HHHH.c;. according to the following: HHHH.c denotes the altitude in metres with one digit after the comma. The altitude can be negative. |
| STR pt3080GpsVersion | 1.3.6.1.4.1.193.223.2.3080.7.9 | DisplayString | read-only | Returns the GPS chip firmware version as a string. |
| I32 pt3080GpsHoldoverTime | 1.3.6.1.4.1.193.223.2.3080.7.10 | Integer32 | read-write | Defines the GPS holdover time. This value is ignored if the holdover forever (see below) is set to YES If the GPS locking is lost the system is allowed to continue operating for holdover time seconds using the internal GPS chip oscillator. If - when the holdover time interval expires - the GPS locking it still lost, the GPS operation will be maintained using external timing if present. If external timing is not present the GPS operation will be maintained using the internal motherboard oscillator. |
| INT pt3080GpsHoldoverForever | 1.3.6.1.4.1.193.223.2.3080.7.11 | INTEGER | read-write | Defines whether the GPS system is allowed to operate infinitely (YES) following loss of GPS locking using the internal GPS chip oscillator or not (NO).In case NO is chosen the GPS holdover time applies. |
| I32 pt3080GpsCableDelay | 1.3.6.1.4.1.193.223.2.3080.7.12 | Integer32 | read-write | Defines the antenna cable compensation delay. If the GPS antenna is situated far away from the receiver itself the signal will be delayed and must be compensated. |
| STR pt3080GpsState | 1.3.6.1.4.1.193.223.2.3080.7.13 | DisplayString | read-only | Returns a string describing the GPS state. For informational purposes. |
| I32 pt3080GpsVisibleSatellitesSnr | 1.3.6.1.4.1.193.223.2.3080.7.14 | Integer32 | read-only | Returns the average signal to noise ratio of all visible satellites via the built-in GPS receiver |
| INT pt3080GpsbiasVoltage | 1.3.6.1.4.1.193.223.2.3080.7.15 | INTEGER | read-write | Defines the gps antenna bias voltage. An active GPS antenna requires a power supply of either 3V or 5V. |
| INT pt3080GpsSatelliteSystemGPS | 1.3.6.1.4.1.193.223.2.3080.7.16 | INTEGER | read-write | Controls whether GPS satellites are used to obtain position and timing information. |
| INT pt3080GpsSatelliteSystemGLONASS | 1.3.6.1.4.1.193.223.2.3080.7.17 | INTEGER | read-write | Controls whether GLONASS satellites are used to obtain position and timing information. |
| INT pt3080GpsSatelliteSystemGALILEO | 1.3.6.1.4.1.193.223.2.3080.7.18 | INTEGER | read-write | Controls whether GALILEO satellites are used to obtain position and timing information. |
| INT pt3080GpsSatelliteSystemCOMPASS | 1.3.6.1.4.1.193.223.2.3080.7.19 | INTEGER | read-write | Controls whether COMPASS satellites are used to obtain position and timing information. |
| pt3080TSoIP | 1.3.6.1.4.1.193.223.2.3080.10 | |||
| I32 pt3080TSoIPRx1SyncTimeout | 1.3.6.1.4.1.193.223.2.3080.10.9 | Integer32 | read-write | Specifies the maximum time accepted between received TS packages. |
| I32 pt3080TSoIPRx1MinumimLatency | 1.3.6.1.4.1.193.223.2.3080.10.10 | Integer32 | read-write | Specifies the minimum time incoming data is buffered. The value configured might be modified by FEC row/column sized on the incoming data. |
| INT pt3080TSoIPRx1LanSelect | 1.3.6.1.4.1.193.223.2.3080.10.11 | INTEGER | read-write | Specifies which virtual LAN interface to receive IP/UDP packets from. |
| INT pt3080TSoIPRx1Multicast | 1.3.6.1.4.1.193.223.2.3080.10.12 | INTEGER | read-write | Enables the reception of Multicast IP/UDP packets with transport stream data to be forward into the modulator. If disabled, only unicast IP/UDP packets are considdered. |
| INT pt3080TSoIPRx1Protocol | 1.3.6.1.4.1.193.223.2.3080.10.13 | INTEGER | read-write | Selects which protocol to expect incoming packets to have. |
| I32 pt3080TSoIPRx1Portnumber | 1.3.6.1.4.1.193.223.2.3080.10.14 | Integer32 | read-write | Specifies which UDP port number to receive IP/UDP packets from. |
| INT pt3080TSoIPRx1ReceiverEnable | 1.3.6.1.4.1.193.223.2.3080.10.15 | INTEGER | read-write | Enables the reception of IP/UDP packets with transport stream data to be forward into the modulator. |
| I32 pt3080TSoIPRx1PacketErrorRatioLimit | 1.3.6.1.4.1.193.223.2.3080.10.16 | Integer32 | read-write | Specifies limit for the Packet Error Ratio. If the limit is exceeded and alarm is raised. |
| INT pt3080TSoIPRx1Status | 1.3.6.1.4.1.193.223.2.3080.10.17 | INTEGER | read-only | The current status of the receiver. Locked means minimum of 3 IP/UDP frames received per second. |
| IP pt3080TSoIPRx1CurrentIPAddress | 1.3.6.1.4.1.193.223.2.3080.10.18 | IpAddress | read-only | The current receive IP address for the TSoIP interface. |
| I32 pt3080TSoIPRx1SequenceErrors | 1.3.6.1.4.1.193.223.2.3080.10.19 | Integer32 | read-only | The number of sequence errors on this channel on the TSoIP interface. |
| I32 pt3080TSoIPRx1PacketErrorRatio | 1.3.6.1.4.1.193.223.2.3080.10.20 | Integer32 | read-only | Shows the current error ratio of uncoming traffic for this UDP port. |
| I32 pt3080TSoIPRx1LostIPFrames | 1.3.6.1.4.1.193.223.2.3080.10.21 | Integer32 | read-only | The number of lost IP frames on the channel on the TSoIP interface. The sequence numbers of frames employed by the RTP protocol are used to determine this statistic. |
| I32 pt3080TSoIPRx1CorrectedIPFrames | 1.3.6.1.4.1.193.223.2.3080.10.22 | Integer32 | read-only | The number of corrected IP frames (via FEC) on this cannel on the TSoIP interface. |
| I32 pt3080TSoIPRx1FecColumn | 1.3.6.1.4.1.193.223.2.3080.10.23 | Integer32 | read-only | The curent FEC Column (L) number for this cannel on the TSoIP interface. |
| I32 pt3080TSoIPRx1FecRow | 1.3.6.1.4.1.193.223.2.3080.10.24 | Integer32 | read-only | The curent FEC Row (D) number for this cannel on the TSoIP interface. |
| I32 pt3080TSoIPRx1PacketsPerFrame | 1.3.6.1.4.1.193.223.2.3080.10.25 | Integer32 | read-only | The curent number of TS packets per IP frames on this cannel on the TSoIP interface. |
| I32 pt3080TSoIPRx1IpBitrate | 1.3.6.1.4.1.193.223.2.3080.10.26 | Integer32 | read-only | Shows the current bitrate of uncoming traffic for this UDP port. |
| I32 pt3080TSoIPRx1QueueSize | 1.3.6.1.4.1.193.223.2.3080.10.27 | Integer32 | read-only | The curent queue size for this cannel on the TSoIP interface. |
| I32 pt3080TSoIPRx1CurrentLatency | 1.3.6.1.4.1.193.223.2.3080.10.28 | Integer32 | read-only | The current latency incurrent by queue size on this channel on the TSoIP interface. |
| I32 pt3080TSoIPRx1TSPacketSize | 1.3.6.1.4.1.193.223.2.3080.10.29 | Integer32 | read-only | The curent size of TS packets on this cannel on the TSoIP interface. Usually 188 or 204. |
| I32 pt3080TSoIPRx1OverrunIPFrames | 1.3.6.1.4.1.193.223.2.3080.10.30 | Integer32 | read-only | The number of IP frames lost on the channel on the TSoIP interface due to overrun. Overrun happens when the outgoing rate of the modulator is lower that the incoming rate of TSoIP data. |
| I32 pt3080TSoIPRx2SyncTimeout | 1.3.6.1.4.1.193.223.2.3080.10.39 | Integer32 | read-write | Specifies the maximum time accepted between received TS packages. |
| I32 pt3080TSoIPRx2MinumimLatency | 1.3.6.1.4.1.193.223.2.3080.10.40 | Integer32 | read-write | Specifies the minimum time incoming data is buffered. The value configured might be modified by FEC row/column sized on the incoming data. |
| INT pt3080TSoIPRx2LanSelect | 1.3.6.1.4.1.193.223.2.3080.10.41 | INTEGER | read-write | Specifies which virtual LAN interface to receive IP/UDP packets from. |
| INT pt3080TSoIPRx2Multicast | 1.3.6.1.4.1.193.223.2.3080.10.42 | INTEGER | read-write | Enables the reception of Multicast IP/UDP packets with transport stream data to be forward into the modulator. If disabled, only unicast IP/UDP packets are considdered. |
| INT pt3080TSoIPRx2Protocol | 1.3.6.1.4.1.193.223.2.3080.10.43 | INTEGER | read-write | Selects which protocol to expect incoming packets to have. |
| I32 pt3080TSoIPRx2Portnumber | 1.3.6.1.4.1.193.223.2.3080.10.44 | Integer32 | read-write | Specifies which UDP port number to receive IP/UDP packets from. |
| INT pt3080TSoIPRx2ReceiverEnable | 1.3.6.1.4.1.193.223.2.3080.10.45 | INTEGER | read-write | Enables the reception of IP/UDP packets with transport stream data to be forward into the modulator. |
| I32 pt3080TSoIPRx2PacketErrorRatioLimit | 1.3.6.1.4.1.193.223.2.3080.10.46 | Integer32 | read-write | Specifies limit for the Packet Error Ratio. If the limit is exceeded and alarm is raised. |
| INT pt3080TSoIPRx2Status | 1.3.6.1.4.1.193.223.2.3080.10.47 | INTEGER | read-only | The current status of the receiver. Locked means minimum of 3 IP/UDP frames received per second. |
| IP pt3080TSoIPRx2CurrentIPAddress | 1.3.6.1.4.1.193.223.2.3080.10.48 | IpAddress | read-only | The current receive IP address for the TSoIP interface. |
| I32 pt3080TSoIPRx2SequenceErrors | 1.3.6.1.4.1.193.223.2.3080.10.49 | Integer32 | read-only | The number of sequence errors on this channel on the TSoIP interface. |
| I32 pt3080TSoIPRx2PacketErrorRatio | 1.3.6.1.4.1.193.223.2.3080.10.50 | Integer32 | read-only | Shows the current error ratio of uncoming traffic for this UDP port. |
| I32 pt3080TSoIPRx2LostIPFrames | 1.3.6.1.4.1.193.223.2.3080.10.51 | Integer32 | read-only | The number of lost IP frames on the channel on the TSoIP interface. The sequence numbers of frames employed by the RTP protocol are used to determine this statistic. |
| I32 pt3080TSoIPRx2CorrectedIPFrames | 1.3.6.1.4.1.193.223.2.3080.10.52 | Integer32 | read-only | The number of corrected IP frames (via FEC) on this cannel on the TSoIP interface. |
| I32 pt3080TSoIPRx2FecColumn | 1.3.6.1.4.1.193.223.2.3080.10.53 | Integer32 | read-only | The curent FEC Column (L) number for this cannel on the TSoIP interface. |
| I32 pt3080TSoIPRx2FecRow | 1.3.6.1.4.1.193.223.2.3080.10.54 | Integer32 | read-only | The curent FEC Row (D) number for this cannel on the TSoIP interface. |
| I32 pt3080TSoIPRx2PacketsPerFrame | 1.3.6.1.4.1.193.223.2.3080.10.55 | Integer32 | read-only | The curent number of TS packets per IP frames on this cannel on the TSoIP interface. |
| I32 pt3080TSoIPRx2IpBitrate | 1.3.6.1.4.1.193.223.2.3080.10.56 | Integer32 | read-only | Shows the current bitrate of uncoming traffic for this UDP port. |
| I32 pt3080TSoIPRx2QueueSize | 1.3.6.1.4.1.193.223.2.3080.10.57 | Integer32 | read-only | The curent queue size for this cannel on the TSoIP interface. |
| I32 pt3080TSoIPRx2CurrentLatency | 1.3.6.1.4.1.193.223.2.3080.10.58 | Integer32 | read-only | The current latency incurrent by queue size on this channel on the TSoIP interface. |
| I32 pt3080TSoIPRx2TSPacketSize | 1.3.6.1.4.1.193.223.2.3080.10.59 | Integer32 | read-only | The curent size of TS packets on this cannel on the TSoIP interface. Usually 188 or 204. |
| I32 pt3080TSoIPRx2OverrunIPFrames | 1.3.6.1.4.1.193.223.2.3080.10.60 | Integer32 | read-only | The number of IP frames lost on the channel on the TSoIP interface due to overrun. Overrun happens when the outgoing rate of the modulator is lower that the incoming rate of TSoIP data. |
| pt3080Monitor | 1.3.6.1.4.1.193.223.2.3080.12 | |||
| INT pt3080MonitorSource | 1.3.6.1.4.1.193.223.2.3080.12.1 | INTEGER | read-write | Selects the source to be monitored on the ASI monitor output. |
| INT pt3080MonitorTSoIPEnable | 1.3.6.1.4.1.193.223.2.3080.12.10 | INTEGER | read-write | Enable or disable the generation of monitor data over TSoIP. |
| INT pt3080MonitorTSoIPSource | 1.3.6.1.4.1.193.223.2.3080.12.11 | INTEGER | read-write | Selects the source to be monitored on the TSoIP monitor output. |
| IP pt3080MonitorTSoIPDestIPAddress | 1.3.6.1.4.1.193.223.2.3080.12.12 | IpAddress | read-write | Selects the destination IP address of the data to be monitored on the TSoIP monitor output. |
| I32 pt3080MonitorTSoIPDestPort | 1.3.6.1.4.1.193.223.2.3080.12.13 | Integer32 | read-write | Selects the destination UDP Port number of the data to be monitored on the TSoIP monitor output. |
| INT pt3080MonitorTSoIPProtocol | 1.3.6.1.4.1.193.223.2.3080.12.14 | INTEGER | read-write | Selects the protocol to be used on the TSoIP monitor output. |
| INT pt3080MonitorTSoIPEnableFec | 1.3.6.1.4.1.193.223.2.3080.12.15 | INTEGER | read-write | Enable or disable FEC protocol on the output data from the TSoIP Monitor. |
| I32 pt3080MonitorTSoIPFecColumn | 1.3.6.1.4.1.193.223.2.3080.12.16 | Integer32 | read-write | Selects the FEC protocoll Column number (L) of the data to be monitored on the TSoIP monitor output. |
| I32 pt3080MonitorTSoIPFecRow | 1.3.6.1.4.1.193.223.2.3080.12.17 | Integer32 | read-write | Selects the FEC protocol Row number (D) of the data to be monitored on the TSoIP monitor output. |
| I32 pt3080MonitorTSoIPFecSkew | 1.3.6.1.4.1.193.223.2.3080.12.18 | Integer32 | read-write | Selects the FEC protocol Skew (non block alignment of FEC Frame) of the data to be monitored on the TSoIP monitor output. |
| INT pt3080MonitorTSoIPKeepNullPackets | 1.3.6.1.4.1.193.223.2.3080.12.19 | INTEGER | read-write | Retain or discard Null packets of the generation of monitor data over TSoIP. |
| I32 pt3080MonitorTSoIPPacketsPerFrame | 1.3.6.1.4.1.193.223.2.3080.12.20 | Integer32 | read-write | Set the number of TS packets to send per IP frame on the TSoIP monitor output. |
| INT pt3080MonitorTSoIPUDPChecksum | 1.3.6.1.4.1.193.223.2.3080.12.21 | INTEGER | read-write | Generate UDP checksum in the outgoing packets of the TSoIP Monitor. |
| I32 pt3080MonitorTSoIPDSCP | 1.3.6.1.4.1.193.223.2.3080.12.22 | Integer32 | read-write | Selects the value of the TOS/DSCP field in IP packets to be sent on the TSoIP monitor output. |
| I32 pt3080MonitorTSoIPTTL | 1.3.6.1.4.1.193.223.2.3080.12.23 | Integer32 | read-write | Selects the value of the TTL (Time-To-Live) field in IP packets to be sent on the TSoIP monitor output. |
| I32 pt3080MonitorTSoIPGenerateError | 1.3.6.1.4.1.193.223.2.3080.12.24 | Integer32 | read-write | Artificially generate an error rate as a percentage of frames lost on the TSoIP monitor output. |
| INT pt3080MonitorTSoIPMulticastLanSelect | 1.3.6.1.4.1.193.223.2.3080.12.25 | INTEGER | read-write | Specifies which virtual LAN interface to transmit Multicast IP/UDP packets out via. |
| I32 pt3080MonitorTSoIPIpBitrate | 1.3.6.1.4.1.193.223.2.3080.12.30 | Integer32 | read-only | The current rate IP packets traffic to be sent on the TSoIP monitor output. |
| I32 pt3080MonitorTSoIPLostIPFrames | 1.3.6.1.4.1.193.223.2.3080.12.31 | Integer32 | read-only | The number of IP packets traffic generated but lost on the TSoIP monitor output. |
| I32 pt3080MonitorTSoIPTSSize | 1.3.6.1.4.1.193.223.2.3080.12.32 | Integer32 | read-only | The current TS packet size (188 or 204) on the TSoIP monitor output. |
| pt3080Test | 1.3.6.1.4.1.193.223.2.3080.13 | |||
| INT pt3080TestEnable | 1.3.6.1.4.1.193.223.2.3080.13.1 | INTEGER | read-write | controls the test signal generation. This cannot be used when network mode is SFN. Only a subset is available in repeater mode. test signal output state: - testSignalsArray[testSignals_OFF] Normal operation. No test signal. - testSignalsArray[testSignals_SCAR] A single carrier output is provided. - testSignalsArray[testSignals_SWEEP2] A test signal with full spectrum bandwidth and a 3dB peak to average power ratio. (OFDM PPR-3). - testSignalsArray[testSignals_PRBSON] Forced transmission of stuffing data only (null packets) irrespective of the status of the MPEG-2 transport stream input. - testSignalsArray[testSignals_PRBSAUTO] Automatic transmission of spectrum based on stuffing data when no MPEG-2 TS input is available. |
| INT pt3080TestEnableReconnect | 1.3.6.1.4.1.193.223.2.3080.13.2 | INTEGER | read-write | Controls whether the test signal shall reconnect after reset. This value is saved in non-volatile memory and thus survives a reboot. - onOffArray[TEXT_INDEX_OFF] The selected test signal will be set to OFF after reset. - onOffArray[TEXT_INDEX_ON] The selected test signal will be output after reset. |
| I32 pt3080TestScarrierLevel | 1.3.6.1.4.1.193.223.2.3080.13.3 | Integer32 | read-write | Control level of the single carrier test signal. |
| I32 pt3080TestscarrierFrequencyOffset | 1.3.6.1.4.1.193.223.2.3080.13.4 | Integer32 | read-write | Control frequency offset of the single carrier test signal. |
| pt3080Alarm | 1.3.6.1.4.1.193.223.2.3080.14 | |||
| pt3080GroupAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.1 | not-accessible | This table contains the group alarms | |
| pt3080GroupAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.1.1 | not-accessible | An entry for the alarms | |
| I32 pt3080GroupAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.1.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080GroupAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.1.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080GroupAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.1.1.3 | INTEGER | read-only | Current GroupAlarm state condition |
| INT pt3080GroupAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.1.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080GroupAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.1.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080GroupAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.1.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080GroupAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.1.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080GroupAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.1.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080GroupAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.1.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080GroupAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.1.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080ASITSPrimaryAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.5 | not-accessible | This table contains the ASI TS-Primary alarms | |
| pt3080ASITSPrimaryAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.5.1 | not-accessible | An entry for the alarms | |
| I32 pt3080ASITSPrimaryAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.5.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080ASITSPrimaryAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.5.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080ASITSPrimaryAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.5.1.3 | INTEGER | read-only | Current ASITSPrimaryAlarm state condition |
| INT pt3080ASITSPrimaryAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.5.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080ASITSPrimaryAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.5.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080ASITSPrimaryAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.5.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080ASITSPrimaryAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.5.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080ASITSPrimaryAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.5.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080ASITSPrimaryAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.5.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080ASITSPrimaryAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.5.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080ASITSSecondaryAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.6 | not-accessible | This table contains the ASI alarms | |
| pt3080ASITSSecondaryAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.6.1 | not-accessible | An entry for the alarms | |
| I32 pt3080ASITSSecondaryAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.6.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080ASITSSecondaryAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.6.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080ASITSSecondaryAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.6.1.3 | INTEGER | read-only | Current ASITSSecondaryAlarm state condition |
| INT pt3080ASITSSecondaryAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.6.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080ASITSSecondaryAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.6.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080ASITSSecondaryAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.6.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080ASITSSecondaryAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.6.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080ASITSSecondaryAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.6.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080ASITSSecondaryAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.6.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080ASITSSecondaryAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.6.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080SFNAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.7 | not-accessible | This table contains the SFN alarms | |
| pt3080SFNAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.7.1 | not-accessible | An entry for the alarms | |
| I32 pt3080SFNAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.7.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080SFNAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.7.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080SFNAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.7.1.3 | INTEGER | read-only | Current SFNAlarm state condition |
| INT pt3080SFNAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.7.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080SFNAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.7.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080SFNAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.7.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080SFNAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.7.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080SFNAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.7.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080SFNAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.7.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080SFNAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.7.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080ReferenceAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.8 | not-accessible | This table contains the Reference alarms | |
| pt3080ReferenceAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.8.1 | not-accessible | An entry for the alarms | |
| I32 pt3080ReferenceAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.8.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080ReferenceAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.8.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080ReferenceAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.8.1.3 | INTEGER | read-only | Current ReferenceAlarm state condition |
| INT pt3080ReferenceAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.8.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080ReferenceAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.8.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080ReferenceAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.8.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080ReferenceAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.8.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080ReferenceAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.8.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080ReferenceAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.8.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080ReferenceAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.8.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080RFAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.9 | not-accessible | This table contains the RF alarms | |
| pt3080RFAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.9.1 | not-accessible | An entry for the alarms | |
| I32 pt3080RFAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.9.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080RFAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.9.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080RFAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.9.1.3 | INTEGER | read-only | Current RFAlarm state condition |
| INT pt3080RFAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.9.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080RFAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.9.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080RFAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.9.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080RFAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.9.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080RFAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.9.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080RFAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.9.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080RFAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.9.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080GPSAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.10 | not-accessible | This table contains the GPS alarms | |
| pt3080GPSAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.10.1 | not-accessible | An entry for the alarms | |
| I32 pt3080GPSAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.10.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080GPSAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.10.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080GPSAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.10.1.3 | INTEGER | read-only | Current GPSAlarm state condition |
| INT pt3080GPSAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.10.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080GPSAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.10.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080GPSAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.10.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080GPSAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.10.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080GPSAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.10.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080GPSAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.10.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080GPSAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.10.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080TSoIPAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.12 | not-accessible | This table contains the TSoIP alarms | |
| pt3080TSoIPAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.12.1 | not-accessible | An entry for the alarms | |
| I32 pt3080TSoIPAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.12.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080TSoIPAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.12.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080TSoIPAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.12.1.3 | INTEGER | read-only | Current TSoIPAlarm state condition |
| INT pt3080TSoIPAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.12.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080TSoIPAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.12.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080TSoIPAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.12.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080TSoIPAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.12.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080TSoIPAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.12.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080TSoIPAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.12.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080TSoIPAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.12.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080ExternalAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.13 | not-accessible | This table contains the External alarms | |
| pt3080ExternalAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.13.1 | not-accessible | An entry for the alarms | |
| I32 pt3080ExternalAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.13.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080ExternalAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.13.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080ExternalAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.13.1.3 | INTEGER | read-only | Current ExternalAlarm state condition |
| INT pt3080ExternalAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.13.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080ExternalAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.13.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080ExternalAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.13.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080ExternalAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.13.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080ExternalAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.13.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080ExternalAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.13.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080ExternalAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.13.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080HWMonitorAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.14 | not-accessible | This table contains the HW Monitor alarms | |
| pt3080HWMonitorAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.14.1 | not-accessible | An entry for the alarms | |
| I32 pt3080HWMonitorAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.14.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080HWMonitorAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.14.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080HWMonitorAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.14.1.3 | INTEGER | read-only | Current HWMonitorAlarm state condition |
| INT pt3080HWMonitorAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.14.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080HWMonitorAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.14.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080HWMonitorAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.14.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080HWMonitorAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.14.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080HWMonitorAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.14.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080HWMonitorAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.14.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080HWMonitorAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.14.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080CommsAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.15 | not-accessible | This table contains the Communication alarms | |
| pt3080CommsAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.15.1 | not-accessible | An entry for the alarms | |
| I32 pt3080CommsAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.15.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080CommsAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.15.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080CommsAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.15.1.3 | INTEGER | read-only | Current CommsAlarm state condition |
| INT pt3080CommsAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.15.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080CommsAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.15.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080CommsAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.15.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080CommsAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.15.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080CommsAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.15.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080CommsAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.15.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080CommsAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.15.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080ASIAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.16 | not-accessible | This table contains the ASI alarms | |
| pt3080ASIAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.16.1 | not-accessible | An entry for the alarms | |
| I32 pt3080ASIAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.16.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080ASIAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.16.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080ASIAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.16.1.3 | INTEGER | read-only | Current ASIAlarm state condition |
| INT pt3080ASIAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.16.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080ASIAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.16.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080ASIAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.16.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080ASIAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.16.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080ASIAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.16.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080ASIAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.16.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080ASIAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.16.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080DemodulatorAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.17 | not-accessible | This table contains the Demodulator alarms | |
| pt3080DemodulatorAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.17.1 | not-accessible | An entry for the alarms | |
| I32 pt3080DemodulatorAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.17.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080DemodulatorAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.17.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080DemodulatorAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.17.1.3 | INTEGER | read-only | Current DemodulatorAlarm state condition |
| INT pt3080DemodulatorAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.17.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080DemodulatorAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.17.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080DemodulatorAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.17.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080DemodulatorAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.17.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080DemodulatorAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.17.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080DemodulatorAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.17.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080DemodulatorAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.17.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080InternalAlarmTable | 1.3.6.1.4.1.193.223.2.3080.14.18 | not-accessible | This table contains the Internal alarms | |
| pt3080InternalAlarmEntry | 1.3.6.1.4.1.193.223.2.3080.14.18.1 | not-accessible | An entry for the alarms | |
| I32 pt3080InternalAlarmID | 1.3.6.1.4.1.193.223.2.3080.14.18.1.1 | Integer32 | not-accessible | Unique ID for this alarm |
| STR pt3080InternalAlarmDescription | 1.3.6.1.4.1.193.223.2.3080.14.18.1.2 | DisplayString | read-only | Description for this alarm |
| INT pt3080InternalAlarmState | 1.3.6.1.4.1.193.223.2.3080.14.18.1.3 | INTEGER | read-only | Current InternalAlarm state condition |
| INT pt3080InternalAlarmActionEventlog | 1.3.6.1.4.1.193.223.2.3080.14.18.1.4 | INTEGER | read-write | Will the current alarm generate an event in the eventlog |
| INT pt3080InternalAlarmActionRelay1 | 1.3.6.1.4.1.193.223.2.3080.14.18.1.5 | INTEGER | read-write | Will the current alarm activate relay1 |
| INT pt3080InternalAlarmActionRelay2 | 1.3.6.1.4.1.193.223.2.3080.14.18.1.6 | INTEGER | read-write | Will the current alarm activate relay2 |
| INT pt3080InternalAlarmActionTrap | 1.3.6.1.4.1.193.223.2.3080.14.18.1.7 | INTEGER | read-write | Will the current alarm generate a trap |
| INT pt3080InternalAlarmActionEmail | 1.3.6.1.4.1.193.223.2.3080.14.18.1.8 | INTEGER | read-write | Will the current alarm generate an email |
| INT pt3080InternalAlarmActionAlarmLED | 1.3.6.1.4.1.193.223.2.3080.14.18.1.9 | INTEGER | read-write | Will the current alarm turn Alarm LED on frontpanel on |
| INT pt3080InternalAlarmActionForceMode | 1.3.6.1.4.1.193.223.2.3080.14.18.1.10 | INTEGER | read-write | Will the current alarm mute output |
| pt3080Preset | 1.3.6.1.4.1.193.223.2.3080.15 | |||
| pt3080PresetTable | 1.3.6.1.4.1.193.223.2.3080.15.1 | not-accessible | This table contains the presets | |
| pt3080PresetEntry | 1.3.6.1.4.1.193.223.2.3080.15.1.1 | not-accessible | An entry for the presets | |
| I32 pt3080PresetNo | 1.3.6.1.4.1.193.223.2.3080.15.1.1.1 | Integer32 | not-accessible | Unique number for this preset |
| STR pt3080PresetName | 1.3.6.1.4.1.193.223.2.3080.15.1.1.2 | DisplayString | read-write | Name for this preset |
| I32 pt3080PresetRecall | 1.3.6.1.4.1.193.223.2.3080.15.2 | Integer32 | read-write | Install this preset into current running parameter set. Value will always read as 0 and setting it to 0 has no effect. |
| I32 pt3080PresetStore | 1.3.6.1.4.1.193.223.2.3080.15.3 | Integer32 | read-write | Store the currently running parameter set into this preset Value will always read as 0 and setting it to 0 has no effect. |
| pt3080Eventlog | 1.3.6.1.4.1.193.223.2.3080.16 | |||
| pt3080EventlogTable | 1.3.6.1.4.1.193.223.2.3080.16.1 | not-accessible | This table contains the group alarms | |
| pt3080EventlogEntry | 1.3.6.1.4.1.193.223.2.3080.16.1.1 | not-accessible | An entry for the alarms | |
| I32 pt3080EventlogNo | 1.3.6.1.4.1.193.223.2.3080.16.1.1.1 | Integer32 | not-accessible | Unique number for this event |
| I32 pt3080EventlogID | 1.3.6.1.4.1.193.223.2.3080.16.1.1.2 | Integer32 | read-only | Unique ID for this type of event |
| DAT pt3080EventlogTimestamp | 1.3.6.1.4.1.193.223.2.3080.16.1.1.3 | DateAndTime | read-only | Timestamp for this event |
| STR pt3080EventlogText | 1.3.6.1.4.1.193.223.2.3080.16.1.1.4 | DisplayString | read-only | Text for this event |
| INT pt3080EventlogClear | 1.3.6.1.4.1.193.223.2.3080.16.2 | INTEGER | read-write | Clear the entire eventlog by setting the value to 1. |
| INT pt3080EventlogEnable | 1.3.6.1.4.1.193.223.2.3080.16.3 | INTEGER | read-write | Enable eventlog by setting the value to 1. |
| INT pt3080EventlogMode | 1.3.6.1.4.1.193.223.2.3080.16.4 | INTEGER | read-write | Set eventlog mode to FIFO for keeping the newest entries. Set eventlog mode to FULL for keeping the oldest entries. |
| pt3080Comms | 1.3.6.1.4.1.193.223.2.3080.17 | |||
| IP pt3080CommsLocalStaticIpAddr | 1.3.6.1.4.1.193.223.2.3080.17.1 | IpAddress | read-write | The static IP address for this interface. Will be used if DHCP is disabled or unavailable. |
| IP pt3080CommsLocalStaticNetmask | 1.3.6.1.4.1.193.223.2.3080.17.2 | IpAddress | read-write | The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable. |
| INT pt3080CommsLocalDhcpMode | 1.3.6.1.4.1.193.223.2.3080.17.3 | INTEGER | read-write | Enable/Disable DHCP client on this interface. |
| IP pt3080CommsLocalCurrentIpAddr | 1.3.6.1.4.1.193.223.2.3080.17.4 | IpAddress | read-only | The current IP address for this interface. |
| IP pt3080CommsLocalCurrentNetmask | 1.3.6.1.4.1.193.223.2.3080.17.5 | IpAddress | read-only | The current IP netmask for this interface. |
| IP pt3080CommsRemoteStaticIpAddr | 1.3.6.1.4.1.193.223.2.3080.17.7 | IpAddress | read-write | The static IP address for this interface. Will be used if DHCP is disabled or unavailable. |
| IP pt3080CommsRemoteStaticNetmask | 1.3.6.1.4.1.193.223.2.3080.17.8 | IpAddress | read-write | The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable. |
| IP pt3080CommsRemoteCurrentIpAddr | 1.3.6.1.4.1.193.223.2.3080.17.10 | IpAddress | read-only | The current IP address for this interface. |
| IP pt3080CommsRemoteCurrentNetmask | 1.3.6.1.4.1.193.223.2.3080.17.11 | IpAddress | read-only | The current IP netmask for this interface. |
| IP pt3080CommsGbeAdminStaticIpAddr | 1.3.6.1.4.1.193.223.2.3080.17.13 | IpAddress | read-write | The static IP address for this interface. Will be used if DHCP is disabled or unavailable. |
| IP pt3080CommsGbeAdminStaticNetmask | 1.3.6.1.4.1.193.223.2.3080.17.14 | IpAddress | read-write | The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable. |
| IP pt3080CommsGbeAdminCurrentIpAddr | 1.3.6.1.4.1.193.223.2.3080.17.16 | IpAddress | read-only | The current IP address for this interface. |
| IP pt3080CommsGbeAdminCurrentNetmask | 1.3.6.1.4.1.193.223.2.3080.17.17 | IpAddress | read-only | The current IP netmask for this interface. |
| IP pt3080CommsStaticDNS1ServerAddress | 1.3.6.1.4.1.193.223.2.3080.17.19 | IpAddress | read-write | The IP address of DNS server 1. |
| IP pt3080CommsCurrentDNS1ServerAddress | 1.3.6.1.4.1.193.223.2.3080.17.20 | IpAddress | read-only | The Current IP address of DNS server 1. |
| IP pt3080CommsStaticDNS2ServerAddress | 1.3.6.1.4.1.193.223.2.3080.17.21 | IpAddress | read-write | The IP address of DNS server 2. |
| IP pt3080CommsCurrentDNS2ServerAddress | 1.3.6.1.4.1.193.223.2.3080.17.22 | IpAddress | read-only | The Current IP address of DNS server 2. |
| IP pt3080CommsStaticDNS3ServerAddress | 1.3.6.1.4.1.193.223.2.3080.17.23 | IpAddress | read-write | The IP address of DNS server 3. |
| IP pt3080CommsCurrentDNS3ServerAddress | 1.3.6.1.4.1.193.223.2.3080.17.24 | IpAddress | read-only | The Current IP address of DNS server 3. |
| STR pt3080CommsStaticDNSDomain | 1.3.6.1.4.1.193.223.2.3080.17.25 | DisplayString | read-write | The static DNS domain name for the device. Will be used if DHCP is disabled or unavailable. |
| STR pt3080CommsCurrentDNSDomain | 1.3.6.1.4.1.193.223.2.3080.17.26 | DisplayString | read-only | The current DNS domain name for the device. |
| STR pt3080CommsStaticHostname | 1.3.6.1.4.1.193.223.2.3080.17.27 | DisplayString | read-write | The static hostname for the device. Will be used if DHCP is disabled or unavailable. |
| STR pt3080CommsCurrentHostname | 1.3.6.1.4.1.193.223.2.3080.17.28 | DisplayString | read-only | The static hostname for the device. Will be used if DHCP is disabled or unavailable. |
| IP pt3080CommsStaticGateway | 1.3.6.1.4.1.193.223.2.3080.17.29 | IpAddress | read-write | The static IP address for the default router (gateway). Will be used unless DHCP is enabled and the DHCP server is configured to include a default router address. |
| IP pt3080CommsCurrentGateway | 1.3.6.1.4.1.193.223.2.3080.17.30 | IpAddress | read-only | The Current IP address for the default router (gateway). |
| STR pt3080CommsStaticNtpServerAddress | 1.3.6.1.4.1.193.223.2.3080.17.31 | DisplayString | read-write | The DNS name or IP address of the NTP server. |
| STR pt3080CommsCurrentNtpServerAddress | 1.3.6.1.4.1.193.223.2.3080.17.32 | DisplayString | read-only | The Current IP address of the NTP server. |
| STR pt3080CommsEmailServerAddress | 1.3.6.1.4.1.193.223.2.3080.17.33 | DisplayString | read-write | The IP address of the Email (SMTP) server. |
| STR pt3080CommsAlarmEmailReceiver | 1.3.6.1.4.1.193.223.2.3080.17.34 | DisplayString | read-write | The email address of the receipiant of alarm emails. |
| I32 pt3080CommsWebServicePort | 1.3.6.1.4.1.193.223.2.3080.17.35 | Integer32 | read-write | The TCP port number used for Web Service. |
| I32 pt3080CommsSCPIServicePort | 1.3.6.1.4.1.193.223.2.3080.17.36 | Integer32 | read-write | The TCP port number used for SCPI Service. |
| INT pt3080CommsSCPIServerBaudrate | 1.3.6.1.4.1.193.223.2.3080.17.37 | INTEGER | read-write | The Baudrate used for SCPI Service on serial port. |
| I32 pt3080CommsRipPort | 1.3.6.1.4.1.193.223.2.3080.17.38 | Integer32 | read-write | The UDP port number used for RIP Service. |
| INT pt3080CommsSCPIUartInterface | 1.3.6.1.4.1.193.223.2.3080.17.39 | INTEGER | read-write | The Interface used for SCPI Service on serial port. |
| INT pt3080CommsAccessAllowed | 1.3.6.1.4.1.193.223.2.3080.17.48 | INTEGER | read-write | Current access mode allowed: Remote: SNMP via Ethernet, Local: Frontpanel |
| I32 pt3080CommsAccessAllowedTimeout | 1.3.6.1.4.1.193.223.2.3080.17.49 | Integer32 | read-write | Timeout (in minutes) before local mode reverts to remote mode. |
| I32 pt3080CommsAccessAllowedTimeLeft | 1.3.6.1.4.1.193.223.2.3080.17.50 | Integer32 | read-only | Current time left (in seconds) before local mode reverts to remote mode. |
| STR pt3080CommsAccessPasswordObserver | 1.3.6.1.4.1.193.223.2.3080.17.51 | DisplayString | read-write | The access password for Observer level access. Will always read as empty. |
| STR pt3080CommsAccessPasswordOperator | 1.3.6.1.4.1.193.223.2.3080.17.52 | DisplayString | read-write | The access password for Operator level access. Will always read as empty. |
| STR pt3080CommsAccessPasswordAdministrator | 1.3.6.1.4.1.193.223.2.3080.17.53 | DisplayString | read-write | The access password for Administrator level access. Will always read as empty. |
| I32 pt3080CommsSNMPServicePort | 1.3.6.1.4.1.193.223.2.3080.17.55 | Integer32 | read-write | The UDP port number used for SNMP Service. |
| STR pt3080CommsSNMPReadOnlyCommunity | 1.3.6.1.4.1.193.223.2.3080.17.56 | DisplayString | read-write | The Read-only community string used to access the SNMP Service. |
| STR pt3080CommsSNMPReadWriteCommunity | 1.3.6.1.4.1.193.223.2.3080.17.57 | DisplayString | read-write | The Read-Write community string used to access the SNMP Service. |
| STR pt3080CommsSNMPTrapCommunity | 1.3.6.1.4.1.193.223.2.3080.17.58 | DisplayString | read-write | The Trap community string used when sending SNMP Traps. |
| STR pt3080CommsSNMPTrapDestination | 1.3.6.1.4.1.193.223.2.3080.17.59 | DisplayString | read-write | The destination IP address for the SNMP traps. |
| I32 pt3080CommsSNMPTrapDestinationPort | 1.3.6.1.4.1.193.223.2.3080.17.60 | Integer32 | read-write | The UDP port number used for Trap destination . |
| INT pt3080CommsRemoteDhcpMode | 1.3.6.1.4.1.193.223.2.3080.17.73 | INTEGER | read-write | Enable/Disable DHCP client on this interface. |
| INT pt3080CommsGbeAdminDhcpMode | 1.3.6.1.4.1.193.223.2.3080.17.74 | INTEGER | read-write | Enable/Disable DHCP client on this interface. |
| INT pt3080CommsBackupDhcpMode | 1.3.6.1.4.1.193.223.2.3080.17.75 | INTEGER | read-write | Enable/Disable DHCP client on this interface. |
| INT pt3080CommsLocalPhysicalInterface | 1.3.6.1.4.1.193.223.2.3080.17.80 | INTEGER | read-write | The Physical Ethernet Interface of this (virtual) interface. |
| INT pt3080CommsRemotePhysicalInterface | 1.3.6.1.4.1.193.223.2.3080.17.81 | INTEGER | read-write | The Physical Ethernet Interface of this (virtual) interface. |
| INT pt3080CommsGbeAdminPhysicalInterface | 1.3.6.1.4.1.193.223.2.3080.17.82 | INTEGER | read-write | The Physical Ethernet Interface of this (virtual) interface. |
| INT pt3080CommsBroadcastStormProtection | 1.3.6.1.4.1.193.223.2.3080.17.94 | INTEGER | read-write | Enable/Disable broadcast (and multicast) storm Protection. This will limit the network ingress rate on physical Ethernet port 0 and 1 to roughly 100mbit/s. |
| I32 pt3080CommsIGMPv2UnsolicitedReportInterval | 1.3.6.1.4.1.193.223.2.3080.17.95 | Integer32 | read-write | The time interval between unsolicited IGMPv2/v1 reports being sent. See RFC2236. The number of such report being sent is controlled by the Query Robustness Count. |
| I32 pt3080CommsIGMPv3UnsolicitedReportInterval | 1.3.6.1.4.1.193.223.2.3080.17.96 | Integer32 | read-write | The time interval between unsolicited IGMPv3 reports being sent. See RFC3376. The number of such report being sent is controlled by the Query Robustness Count. |
| I32 pt3080CommsIGMPQueryRobustnessCount | 1.3.6.1.4.1.193.223.2.3080.17.97 | Integer32 | read-write | The Number of Query Replies sent. The higher a number, the more robust IGMP setup is. At the cost of traffic on the network. Note: Changing this parameter doesnt take effect on a network interface until it has (re-)enabled. |
| INT pt3080CommsSeparatedSwitchPorts | 1.3.6.1.4.1.193.223.2.3080.17.98 | INTEGER | read-write | Will the ports on the switch in the backplane forward LAN traffic to each other or will they be separated and only forward traffic to/from the modulator/repeater. |
| INT pt3080CommsIGMPVersion | 1.3.6.1.4.1.193.223.2.3080.17.99 | INTEGER | read-write | Select which IGMP Version to use. |
| IP pt3080CommsLocalIpMulticastAddr | 1.3.6.1.4.1.193.223.2.3080.17.100 | IpAddress | read-write | The IP Multicast address for this interface. |
| INT pt3080CommsLocalVlanEnable | 1.3.6.1.4.1.193.223.2.3080.17.101 | INTEGER | read-write | Enable/Disable VLAN on this interface. |
| I32 pt3080CommsLocalVlanId | 1.3.6.1.4.1.193.223.2.3080.17.102 | Integer32 | read-write | VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface. |
| INT pt3080CommsLocalServiceSNMP | 1.3.6.1.4.1.193.223.2.3080.17.103 | INTEGER | read-write | Enable/Disable SNMP service on this interface. |
| INT pt3080CommsLocalServiceSCPI | 1.3.6.1.4.1.193.223.2.3080.17.104 | INTEGER | read-write | Enable/Disable SCPI service on this interface. |
| INT pt3080CommsLocalServiceTSoIP | 1.3.6.1.4.1.193.223.2.3080.17.105 | INTEGER | read-write | Enable/Disable TSoIP service on this interface. |
| INT pt3080CommsLocalServiceRIP | 1.3.6.1.4.1.193.223.2.3080.17.106 | INTEGER | read-write | Enable/Disable RIP service on this interface. |
| IP pt3080CommsRemoteIpMulticastAddr | 1.3.6.1.4.1.193.223.2.3080.17.110 | IpAddress | read-write | The IP Multicast address for this interface. |
| INT pt3080CommsRemoteVlanEnable | 1.3.6.1.4.1.193.223.2.3080.17.111 | INTEGER | read-write | Enable/Disable VLAN on this interface. |
| I32 pt3080CommsRemoteVlanId | 1.3.6.1.4.1.193.223.2.3080.17.112 | Integer32 | read-write | VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface. |
| INT pt3080CommsRemoteServiceSNMP | 1.3.6.1.4.1.193.223.2.3080.17.113 | INTEGER | read-write | Enable/Disable SNMP service on this interface. |
| INT pt3080CommsRemoteServiceSCPI | 1.3.6.1.4.1.193.223.2.3080.17.114 | INTEGER | read-write | Enable/Disable SCPI service on this interface. |
| INT pt3080CommsRemoteServiceTSoIP | 1.3.6.1.4.1.193.223.2.3080.17.115 | INTEGER | read-write | Enable/Disable TSoIP service on this interface. |
| INT pt3080CommsRemoteServiceWeb | 1.3.6.1.4.1.193.223.2.3080.17.116 | INTEGER | read-write | Enable/Disable WEB (http) service on this interface. |
| INT pt3080CommsRemoteEnable | 1.3.6.1.4.1.193.223.2.3080.17.117 | INTEGER | read-write | Enable/Disable this interface. |
| INT pt3080CommsRemoteServiceRIP | 1.3.6.1.4.1.193.223.2.3080.17.118 | INTEGER | read-write | Enable/Disable RIP service on this interface. |
| IP pt3080CommsGbeAdminIpMulticastAddr | 1.3.6.1.4.1.193.223.2.3080.17.120 | IpAddress | read-write | The IP Multicast address for this interface. |
| INT pt3080CommsGbeAdminVlanEnable | 1.3.6.1.4.1.193.223.2.3080.17.121 | INTEGER | read-write | Enable/Disable VLAN on this interface. |
| I32 pt3080CommsGbeAdminVlanId | 1.3.6.1.4.1.193.223.2.3080.17.122 | Integer32 | read-write | VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface. |
| INT pt3080CommsGbeAdminServiceSNMP | 1.3.6.1.4.1.193.223.2.3080.17.123 | INTEGER | read-write | Enable/Disable SNMP service on this interface. |
| INT pt3080CommsGbeAdminServiceSCPI | 1.3.6.1.4.1.193.223.2.3080.17.124 | INTEGER | read-write | Enable/Disable SCPI service on this interface. |
| INT pt3080CommsGbeAdminServiceTSoIP | 1.3.6.1.4.1.193.223.2.3080.17.125 | INTEGER | read-write | Enable/Disable TSoIP service on this interface. |
| INT pt3080CommsGbeAdminServiceWeb | 1.3.6.1.4.1.193.223.2.3080.17.126 | INTEGER | read-write | Enable/Disable Web (http) service on this interface. |
| INT pt3080CommsGbeAdminEnable | 1.3.6.1.4.1.193.223.2.3080.17.127 | INTEGER | read-write | Enable/Disable this interface. |
| INT pt3080CommsGbeAdminServiceRIP | 1.3.6.1.4.1.193.223.2.3080.17.128 | INTEGER | read-write | Enable/Disable RIP service on this interface. |
| INT pt3080CommsBackupEnable | 1.3.6.1.4.1.193.223.2.3080.17.150 | INTEGER | read-write | Enable/Disable this interface. |
| INT pt3080CommsBackupPhysicalInterface | 1.3.6.1.4.1.193.223.2.3080.17.151 | INTEGER | read-write | The Physical Ethernet Interface of this (virtual) interface. |
| IP pt3080CommsBackupStaticIpAddr | 1.3.6.1.4.1.193.223.2.3080.17.152 | IpAddress | read-write | The static IP address for this interface. Will be used if DHCP is disabled or unavailable. |
| IP pt3080CommsBackupStaticNetmask | 1.3.6.1.4.1.193.223.2.3080.17.153 | IpAddress | read-write | The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable. |
| IP pt3080CommsBackupIpMulticastAddr | 1.3.6.1.4.1.193.223.2.3080.17.154 | IpAddress | read-write | The IP Multicast address for this interface. |
| INT pt3080CommsBackupVlanEnable | 1.3.6.1.4.1.193.223.2.3080.17.155 | INTEGER | read-write | Enable/Disable VLAN on this interface. |
| I32 pt3080CommsBackupVlanId | 1.3.6.1.4.1.193.223.2.3080.17.156 | Integer32 | read-write | VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface. |
| INT pt3080CommsBackupServiceSNMP | 1.3.6.1.4.1.193.223.2.3080.17.157 | INTEGER | read-write | Enable/Disable SNMP service on this interface. |
| INT pt3080CommsBackupServiceSCPI | 1.3.6.1.4.1.193.223.2.3080.17.158 | INTEGER | read-write | Enable/Disable SCPI service on this interface. |
| INT pt3080CommsBackupServiceTSoIP | 1.3.6.1.4.1.193.223.2.3080.17.159 | INTEGER | read-write | Enable/Disable TSoIP service on this interface. |
| INT pt3080CommsBackupServiceWeb | 1.3.6.1.4.1.193.223.2.3080.17.160 | INTEGER | read-write | Enable/Disable Web (http) service on this interface. |
| INT pt3080CommsBackupServiceRIP | 1.3.6.1.4.1.193.223.2.3080.17.161 | INTEGER | read-write | Enable/Disable RIP service on this interface. |
| IP pt3080CommsBackupCurrentIpAddr | 1.3.6.1.4.1.193.223.2.3080.17.162 | IpAddress | read-only | The current IP address for this interface. |
| IP pt3080CommsBackupCurrentNetmask | 1.3.6.1.4.1.193.223.2.3080.17.163 | IpAddress | read-only | The current IP netmask for this interface. |
| IP pt3080CommsBackupIpMulticastSourceFilterAddress1 | 1.3.6.1.4.1.193.223.2.3080.17.170 | IpAddress | read-write | The IP Multicast Source Filter address no 1 for this interface. |
| IP pt3080CommsBackupIpMulticastSourceFilterAddress2 | 1.3.6.1.4.1.193.223.2.3080.17.171 | IpAddress | read-write | The IP Multicast Source Filter address no 2 for this interface. |
| IP pt3080CommsBackupIpMulticastSourceFilterAddress3 | 1.3.6.1.4.1.193.223.2.3080.17.172 | IpAddress | read-write | The IP Multicast Source Filter address no 3 for this interface. |
| IP pt3080CommsBackupIpMulticastSourceFilterAddress4 | 1.3.6.1.4.1.193.223.2.3080.17.173 | IpAddress | read-write | The IP Multicast Source Filter address no 4 for this interface. |
| IP pt3080CommsBackupIpMulticastSourceFilterAddress5 | 1.3.6.1.4.1.193.223.2.3080.17.174 | IpAddress | read-write | The IP Multicast Source Filter address no 5 for this interface. |
| IP pt3080CommsBackupIpMulticastSourceFilterAddress6 | 1.3.6.1.4.1.193.223.2.3080.17.175 | IpAddress | read-write | The IP Multicast Source Filter address no 6 for this interface. |
| INT pt3080CommsLocalIpMulticastSourceFilterMode | 1.3.6.1.4.1.193.223.2.3080.17.190 | INTEGER | read-write | Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list. |
| INT pt3080CommsRemoteIpMulticastSourceFilterMode | 1.3.6.1.4.1.193.223.2.3080.17.191 | INTEGER | read-write | Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list. |
| INT pt3080CommsGbeAdminIpMulticastSourceFilterMode | 1.3.6.1.4.1.193.223.2.3080.17.192 | INTEGER | read-write | Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list. |
| INT pt3080CommsBackupIpMulticastSourceFilterMode | 1.3.6.1.4.1.193.223.2.3080.17.193 | INTEGER | read-write | Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list. |
| IP pt3080CommsLocalIpMulticastSourceFilterAddress1 | 1.3.6.1.4.1.193.223.2.3080.17.200 | IpAddress | read-write | The IP Multicast Source Filter address no 1 for this interface. |
| IP pt3080CommsLocalIpMulticastSourceFilterAddress2 | 1.3.6.1.4.1.193.223.2.3080.17.201 | IpAddress | read-write | The IP Multicast Source Filter address no 2 for this interface. |
| IP pt3080CommsLocalIpMulticastSourceFilterAddress3 | 1.3.6.1.4.1.193.223.2.3080.17.202 | IpAddress | read-write | The IP Multicast Source Filter address no 3 for this interface. |
| IP pt3080CommsLocalIpMulticastSourceFilterAddress4 | 1.3.6.1.4.1.193.223.2.3080.17.203 | IpAddress | read-write | The IP Multicast Source Filter address no 4 for this interface. |
| IP pt3080CommsLocalIpMulticastSourceFilterAddress5 | 1.3.6.1.4.1.193.223.2.3080.17.204 | IpAddress | read-write | The IP Multicast Source Filter address no 5 for this interface. |
| IP pt3080CommsLocalIpMulticastSourceFilterAddress6 | 1.3.6.1.4.1.193.223.2.3080.17.205 | IpAddress | read-write | The IP Multicast Source Filter address no 6 for this interface. |
| IP pt3080CommsRemoteIpMulticastSourceFilterAddress1 | 1.3.6.1.4.1.193.223.2.3080.17.220 | IpAddress | read-write | The IP Multicast Source Filter address no 1 for this interface. |
| IP pt3080CommsRemoteIpMulticastSourceFilterAddress2 | 1.3.6.1.4.1.193.223.2.3080.17.221 | IpAddress | read-write | The IP Multicast Source Filter address no 2 for this interface. |
| IP pt3080CommsRemoteIpMulticastSourceFilterAddress3 | 1.3.6.1.4.1.193.223.2.3080.17.222 | IpAddress | read-write | The IP Multicast Source Filter address no 3 for this interface. |
| IP pt3080CommsRemoteIpMulticastSourceFilterAddress4 | 1.3.6.1.4.1.193.223.2.3080.17.223 | IpAddress | read-write | The IP Multicast Source Filter address no 4 for this interface. |
| IP pt3080CommsRemoteIpMulticastSourceFilterAddress5 | 1.3.6.1.4.1.193.223.2.3080.17.224 | IpAddress | read-write | The IP Multicast Source Filter address no 5 for this interface. |
| IP pt3080CommsRemoteIpMulticastSourceFilterAddress6 | 1.3.6.1.4.1.193.223.2.3080.17.225 | IpAddress | read-write | The IP Multicast Source Filter address no 6 for this interface. |
| IP pt3080CommsGbeAdminIpMulticastSourceFilterAddress1 | 1.3.6.1.4.1.193.223.2.3080.17.230 | IpAddress | read-write | The IP Multicast Source Filter address no 1 for this interface. |
| IP pt3080CommsGbeAdminIpMulticastSourceFilterAddress2 | 1.3.6.1.4.1.193.223.2.3080.17.231 | IpAddress | read-write | The IP Multicast Source Filter address no 2 for this interface. |
| IP pt3080CommsGbeAdminIpMulticastSourceFilterAddress3 | 1.3.6.1.4.1.193.223.2.3080.17.232 | IpAddress | read-write | The IP Multicast Source Filter address no 3 for this interface. |
| IP pt3080CommsGbeAdminIpMulticastSourceFilterAddress4 | 1.3.6.1.4.1.193.223.2.3080.17.233 | IpAddress | read-write | The IP Multicast Source Filter address no 4 for this interface. |
| IP pt3080CommsGbeAdminIpMulticastSourceFilterAddress5 | 1.3.6.1.4.1.193.223.2.3080.17.234 | IpAddress | read-write | The IP Multicast Source Filter address no 5 for this interface. |
| IP pt3080CommsGbeAdminIpMulticastSourceFilterAddress6 | 1.3.6.1.4.1.193.223.2.3080.17.235 | IpAddress | read-write | The IP Multicast Source Filter address no 6 for this interface. |
| pt3080CommsStaticRouteTable | 1.3.6.1.4.1.193.223.2.3080.17.300 | not-accessible | This table contains the static routing table entries | |
| pt3080CommsStaticRouteEntry | 1.3.6.1.4.1.193.223.2.3080.17.300.1 | not-accessible | An entry for the static network routing table | |
| I32 pt3080CommsStaticRouteNO | 1.3.6.1.4.1.193.223.2.3080.17.300.1.1 | Integer32 | not-accessible | Unique ID for this static route entry |
| INT pt3080CommsStaticRouteType | 1.3.6.1.4.1.193.223.2.3080.17.300.1.2 | INTEGER | read-write | Type of a Route table entry. |
| IP pt3080CommsStaticRoutePrefix | 1.3.6.1.4.1.193.223.2.3080.17.300.1.3 | IpAddress | read-write | The IP address part of prefix for a route table entry. If the address is 0.0.0.0, the entry will not be used. |
| I32 pt3080CommsStaticRoutePrefixSize | 1.3.6.1.4.1.193.223.2.3080.17.300.1.4 | Integer32 | read-write | The number of bits in the network part of the prefix for route table entry $. If the number is 0 (zero), the entry will not be used. |
| IP pt3080CommsStaticRouteTarget | 1.3.6.1.4.1.193.223.2.3080.17.300.1.5 | IpAddress | read-write | The target IP address for a route table entry. Only used if pt3080CommsStaticRouteType is normal(1) or recursive(3). If the target address is 0.0.0.0, the entry will not be used. |
| INT pt3080CommsStaticRoutePhysicalInterface | 1.3.6.1.4.1.193.223.2.3080.17.300.1.6 | INTEGER | read-write | The Physical Ethernet Interface to use for a Route table entry. Only used when pt3080CommsStaticRouteType is physicalif(2). |
| STR pt3080CommsSNMPTrapDestination2 | 1.3.6.1.4.1.193.223.2.3080.17.419 | DisplayString | read-write | The destination 2 IP address for the SNMP traps. |
| I32 pt3080CommsSNMPTrapDestinationPort2 | 1.3.6.1.4.1.193.223.2.3080.17.420 | Integer32 | read-write | The UDP port number used for Trap destination 2. |
| STR pt3080CommsSNMPTrapDestination3 | 1.3.6.1.4.1.193.223.2.3080.17.779 | DisplayString | read-write | The destination 3 IP address for the SNMP traps. |
| I32 pt3080CommsSNMPTrapDestinationPort3 | 1.3.6.1.4.1.193.223.2.3080.17.780 | Integer32 | read-write | The UDP port number used for Trap destination 3. |
| STR pt3080CommsSNMPTrapDestination4 | 1.3.6.1.4.1.193.223.2.3080.17.1139 | DisplayString | read-write | The destination 4 IP address for the SNMP traps. |
| I32 pt3080CommsSNMPTrapDestinationPort4 | 1.3.6.1.4.1.193.223.2.3080.17.1140 | Integer32 | read-write | The UDP port number used for Trap destination 4. |
| STR pt3080CommsSNMPTrapDestination5 | 1.3.6.1.4.1.193.223.2.3080.17.1499 | DisplayString | read-write | The destination 5 IP address for the SNMP traps. |
| I32 pt3080CommsSNMPTrapDestinationPort5 | 1.3.6.1.4.1.193.223.2.3080.17.1500 | Integer32 | read-write | The UDP port number used for Trap destination 5. |
| INT pt3080CommsPortDhcpMode | 1.3.6.1.4.1.193.223.2.3080.17.2075 | INTEGER | read-write | Enable/Disable DHCP client on this interface. |
| INT pt3080CommsPortPhysicalInterface | 1.3.6.1.4.1.193.223.2.3080.17.2151 | INTEGER | read-write | The Physical Ethernet Interface of this (virtual) interface. |
| IP pt3080CommsPortStaticIpAddr | 1.3.6.1.4.1.193.223.2.3080.17.2152 | IpAddress | read-write | The static IP address for this interface. Will be used if DHCP is disabled or unavailable. |
| IP pt3080CommsPortStaticNetmask | 1.3.6.1.4.1.193.223.2.3080.17.2153 | IpAddress | read-write | The static IP netmask for this interface. Will be used if DHCP is disabled or unavailable. |
| IP pt3080CommsPortIpMulticastAddr | 1.3.6.1.4.1.193.223.2.3080.17.2154 | IpAddress | read-write | The IP Multicast address for this interface. |
| INT pt3080CommsPortVlanEnable | 1.3.6.1.4.1.193.223.2.3080.17.2155 | INTEGER | read-write | Enable/Disable VLAN on this interface. |
| I32 pt3080CommsPortVlanId | 1.3.6.1.4.1.193.223.2.3080.17.2156 | Integer32 | read-write | VLAN ID to use on this interface, if VLAN is enabled. Please note that VLAN ID 4001 and 4002 are used for internal switching and thus cannot be used on any interface. |
| INT pt3080CommsPortServiceSNMP | 1.3.6.1.4.1.193.223.2.3080.17.2157 | INTEGER | read-write | Enable/Disable SNMP service on this interface. |
| INT pt3080CommsPortServiceSCPI | 1.3.6.1.4.1.193.223.2.3080.17.2158 | INTEGER | read-write | Enable/Disable SCPI service on this interface. |
| INT pt3080CommsPortServiceTSoIP | 1.3.6.1.4.1.193.223.2.3080.17.2159 | INTEGER | read-write | Enable/Disable TSoIP service on this interface. |
| INT pt3080CommsPortServiceWeb | 1.3.6.1.4.1.193.223.2.3080.17.2160 | INTEGER | read-write | Enable/Disable Web (http) service on this interface. |
| INT pt3080CommsPortServiceRIP | 1.3.6.1.4.1.193.223.2.3080.17.2161 | INTEGER | read-write | Enable/Disable RIP service on this interface. |
| IP pt3080CommsPortCurrentIpAddr | 1.3.6.1.4.1.193.223.2.3080.17.2162 | IpAddress | read-only | The current IP address for this interface. |
| IP pt3080CommsPortCurrentNetmask | 1.3.6.1.4.1.193.223.2.3080.17.2163 | IpAddress | read-only | The current IP netmask for this interface. |
| IP pt3080CommsPortIpMulticastSourceFilterAddress1 | 1.3.6.1.4.1.193.223.2.3080.17.2170 | IpAddress | read-write | The IP Multicast Source Filter address no 1 for this interface. |
| IP pt3080CommsPortIpMulticastSourceFilterAddress2 | 1.3.6.1.4.1.193.223.2.3080.17.2171 | IpAddress | read-write | The IP Multicast Source Filter address no 2 for this interface. |
| IP pt3080CommsPortIpMulticastSourceFilterAddress3 | 1.3.6.1.4.1.193.223.2.3080.17.2172 | IpAddress | read-write | The IP Multicast Source Filter address no 3 for this interface. |
| IP pt3080CommsPortIpMulticastSourceFilterAddress4 | 1.3.6.1.4.1.193.223.2.3080.17.2173 | IpAddress | read-write | The IP Multicast Source Filter address no 4 for this interface. |
| IP pt3080CommsPortIpMulticastSourceFilterAddress5 | 1.3.6.1.4.1.193.223.2.3080.17.2174 | IpAddress | read-write | The IP Multicast Source Filter address no 5 for this interface. |
| IP pt3080CommsPortIpMulticastSourceFilterAddress6 | 1.3.6.1.4.1.193.223.2.3080.17.2175 | IpAddress | read-write | The IP Multicast Source Filter address no 6 for this interface. |
| INT pt3080CommsPortIpMulticastSourceFilterMode | 1.3.6.1.4.1.193.223.2.3080.17.2193 | INTEGER | read-write | Specifies whether the Multicast Source Filter IP Address list is: SFINCLUDE: ONLY receive multicast frames from the source addresses in the list. SFEXCLUDE: Receive all multicast frames EXCEPT from the source addresses in the list. |
| INT pt3080CommsPortEnable | 1.3.6.1.4.1.193.223.2.3080.17.2500 | INTEGER | read-write | Enable/Disable this interface. |
| pt3080Demodulator | 1.3.6.1.4.1.193.223.2.3080.24 | |||
| INT pt3080DemodulatorFollowMode | 1.3.6.1.4.1.193.223.2.3080.24.1 | INTEGER | read-write | Controls the Demodulators follow mode. |
| INT pt3080Demodulator1Available | 1.3.6.1.4.1.193.223.2.3080.24.2 | INTEGER | read-only | Status on the availability of Demodulator 1 |
| STR pt3080Demodulator1FWVersion | 1.3.6.1.4.1.193.223.2.3080.24.3 | DisplayString | read-only | Demodulator 1 firmware version string |
| INT pt3080Demodulator1OutputTS | 1.3.6.1.4.1.193.223.2.3080.24.4 | INTEGER | read-write | Controls which TS demodulator 1 shall output |
| I32 pt3080Demodulator1MerLimit | 1.3.6.1.4.1.193.223.2.3080.24.5 | Integer32 | read-write | Lower limit for MER Level |
| I32 pt3080Demodulator1PreVirterbiErrorRateLimit | 1.3.6.1.4.1.193.223.2.3080.24.6 | Integer32 | read-write | Upper limit for Pre-Virterbi Bit Error Rate |
| I32 pt3080Demodulator1PostVirterbiErrorRateLimit | 1.3.6.1.4.1.193.223.2.3080.24.7 | Integer32 | read-write | Upper limit for Post-Virterbi Bit Error Rate |
| INT pt3080Demodulator1FelStatus | 1.3.6.1.4.1.193.223.2.3080.24.8 | INTEGER | read-only | Received signal locked status on Demodulator 1 |
| I32 pt3080Demodulator1UncorrectedPackets | 1.3.6.1.4.1.193.223.2.3080.24.9 | Integer32 | read-only | Number of uncorrected packets received in Demodulator 1 since boot or since counter was last cleared. |
| I32 pt3080Demodulator1Mer | 1.3.6.1.4.1.193.223.2.3080.24.11 | Integer32 | read-only | Current MER level for Demodulator 1 |
| I32 pt3080Demodulator1PreVirterbiErrorRate | 1.3.6.1.4.1.193.223.2.3080.24.12 | Integer32 | read-only | Current Pre-Virterbi Bit Error Rate for Demodulator 1 |
| I32 pt3080Demodulator1PostVirterbiErrorRate | 1.3.6.1.4.1.193.223.2.3080.24.13 | Integer32 | read-only | Current Post-Virterbi Bit Error Rate for Demodulator 1 |
| INT pt3080Demodulator1ActualGuardInterval | 1.3.6.1.4.1.193.223.2.3080.24.14 | INTEGER | read-only | Guard Interval for the received signal on Demodulator 1 |
| INT pt3080Demodulator1Actualifft | 1.3.6.1.4.1.193.223.2.3080.24.15 | INTEGER | read-only | IFFT for the received signal on Demodulator 1 |
| INT pt3080Demodulator1ActualConstellation | 1.3.6.1.4.1.193.223.2.3080.24.16 | INTEGER | read-only | Constellation for the received signal on Demodulator 1 |
| INT pt3080Demodulator1ActualHierarchy | 1.3.6.1.4.1.193.223.2.3080.24.17 | INTEGER | read-only | Hierarchy for the received signal on Demodulator 1 |
| INT pt3080Demodulator1ActualCodeRateHighPrio | 1.3.6.1.4.1.193.223.2.3080.24.18 | INTEGER | read-only | High Priority Code Rate for the received signal on Demodulator 1 |
| INT pt3080Demodulator1ActualCodeRateLowPrio | 1.3.6.1.4.1.193.223.2.3080.24.19 | INTEGER | read-only | High Priority Code Rate for the received signal on Demodulator 1 |
| INT pt3080Demodulator1ActualDeepInterleaver | 1.3.6.1.4.1.193.223.2.3080.24.20 | INTEGER | read-only | Deep Interleaver for the received signal on Demodulator 1 |
| INT pt3080Demodulator1ActualMpeFecHighPrio | 1.3.6.1.4.1.193.223.2.3080.24.21 | INTEGER | read-only | High Priority MPE/FEC mode for the received signal on Demodulator 1 |
| INT pt3080Demodulator1ActualMpeFecLowPrio | 1.3.6.1.4.1.193.223.2.3080.24.22 | INTEGER | read-only | Low Priority MPE/FEC mode for the received signal on Demodulator 1 |
| INT pt3080Demodulator1ActualTimeSlicingHighPrio | 1.3.6.1.4.1.193.223.2.3080.24.23 | INTEGER | read-only | High Priority timeslicing mode for the received signal on Demodulator 1 |
| INT pt3080Demodulator1ActualTimeSlicingLowPrio | 1.3.6.1.4.1.193.223.2.3080.24.24 | INTEGER | read-only | Low Priority timeslicing mode for the received signal on Demodulator 1 |
| I32 pt3080Demodulator1ActualCellID | 1.3.6.1.4.1.193.223.2.3080.24.25 | Integer32 | read-only | Current Cell ID value for the received signal on Demodulator 1 |
| INT pt3080Demodulator1ActualDVBHMode | 1.3.6.1.4.1.193.223.2.3080.24.26 | INTEGER | read-only | DVB-H mode for the received signal on Demodulator 1 |
| INT pt3080Demodulator2Available | 1.3.6.1.4.1.193.223.2.3080.24.29 | INTEGER | read-only | Status on the availability of Demodulator 2 |
| STR pt3080Demodulator2FWVersion | 1.3.6.1.4.1.193.223.2.3080.24.30 | DisplayString | read-only | Demodulator 2 firmware version string |
| INT pt3080Demodulator2OutputTS | 1.3.6.1.4.1.193.223.2.3080.24.31 | INTEGER | read-write | Controls which TS demodulator 2 shall output |
| I32 pt3080Demodulator2MerLimit | 1.3.6.1.4.1.193.223.2.3080.24.32 | Integer32 | read-write | Lower limit for MER Level |
| I32 pt3080Demodulator2PreVirterbiErrorRateLimit | 1.3.6.1.4.1.193.223.2.3080.24.33 | Integer32 | read-write | Upper limit for Pre-Virterbi Bit Error Rate |
| I32 pt3080Demodulator2PostVirterbiErrorRateLimit | 1.3.6.1.4.1.193.223.2.3080.24.34 | Integer32 | read-write | Upper limit for Post-Virterbi Bit Error Rate |
| INT pt3080Demodulator2FelStatus | 1.3.6.1.4.1.193.223.2.3080.24.35 | INTEGER | read-only | Received signal locked status on Demodulator 2 |
| I32 pt3080Demodulator2UncorrectedPackets | 1.3.6.1.4.1.193.223.2.3080.24.36 | Integer32 | read-only | Number of uncorrected packets received in Demodulator 2 since boot or since counter was last cleared. |
| I32 pt3080Demodulator2Mer | 1.3.6.1.4.1.193.223.2.3080.24.38 | Integer32 | read-only | Current MER level for Demodulator 2 |
| I32 pt3080Demodulator2PreVirterbiErrorRate | 1.3.6.1.4.1.193.223.2.3080.24.39 | Integer32 | read-only | Current Pre-Virterbi Bit Error Rate for Demodulator 2 |
| I32 pt3080Demodulator2PostVirterbiErrorRate | 1.3.6.1.4.1.193.223.2.3080.24.40 | Integer32 | read-only | Current Post-Virterbi Bit Error Rate for Demodulator 2 |
| INT pt3080Demodulator2ActualGuardInterval | 1.3.6.1.4.1.193.223.2.3080.24.41 | INTEGER | read-only | Guard Interval for the received signal on Demodulator 2 |
| INT pt3080Demodulator2Actualifft | 1.3.6.1.4.1.193.223.2.3080.24.42 | INTEGER | read-only | IFFT for the received signal on Demodulator 2 |
| INT pt3080Demodulator2ActualConstellation | 1.3.6.1.4.1.193.223.2.3080.24.43 | INTEGER | read-only | Constellation for the received signal on Demodulator 2 |
| INT pt3080Demodulator2ActualHierarchy | 1.3.6.1.4.1.193.223.2.3080.24.44 | INTEGER | read-only | Hierarchy for the received signal on Demodulator 2 |
| INT pt3080Demodulator2ActualCodeRateHighPrio | 1.3.6.1.4.1.193.223.2.3080.24.45 | INTEGER | read-only | High Priority Code Rate for the received signal on Demodulator 2 |
| INT pt3080Demodulator2ActualCodeRateLowPrio | 1.3.6.1.4.1.193.223.2.3080.24.46 | INTEGER | read-only | High Priority Code Rate for the received signal on Demodulator 2 |
| INT pt3080Demodulator2ActualDeepInterleaver | 1.3.6.1.4.1.193.223.2.3080.24.47 | INTEGER | read-only | Deep Interleaver for the received signal on Demodulator 2 |
| INT pt3080Demodulator2ActualMpeFecHighPrio | 1.3.6.1.4.1.193.223.2.3080.24.48 | INTEGER | read-only | High Priority MPE/FEC mode for the received signal on Demodulator 2 |
| INT pt3080Demodulator2ActualMpeFecLowPrio | 1.3.6.1.4.1.193.223.2.3080.24.49 | INTEGER | read-only | Low Priority MPE/FEC mode for the received signal on Demodulator 2 |
| INT pt3080Demodulator2ActualTimeSlicingHighPrio | 1.3.6.1.4.1.193.223.2.3080.24.50 | INTEGER | read-only | High Priority timeslicing mode for the received signal on Demodulator 2 |
| INT pt3080Demodulator2ActualTimeSlicingLowPrio | 1.3.6.1.4.1.193.223.2.3080.24.51 | INTEGER | read-only | Low Priority timeslicing mode for the received signal on Demodulator 2 |
| I32 pt3080Demodulator2ActualCellID | 1.3.6.1.4.1.193.223.2.3080.24.52 | Integer32 | read-only | Current Cell ID value for the received signal on Demodulator 1 |
| INT pt3080Demodulator2ActualDVBHMode | 1.3.6.1.4.1.193.223.2.3080.24.53 | INTEGER | read-only | DVB-H mode for the received signal on Demodulator 2 |
| pt3080Precorrector | 1.3.6.1.4.1.193.223.2.3080.25 | |||
| INT pt3080PrecorrectorLinearAdaptiveMode | 1.3.6.1.4.1.193.223.2.3080.25.1 | INTEGER | read-write | selection of the operational mode for the linear adaptive precorrector (note: legacy term used for backward compatibility. IDLE Equal to the mode named MONITORING in the WEB GUI ) |
| INT pt3080PrecorrectorLinearMode | 1.3.6.1.4.1.193.223.2.3080.25.2 | INTEGER | read-write | selection of the operational mode for the linear precorrector (note: legacy term used for backward compatibility. MONITORING Equal to the mode named BYPASS in the WEB GUI ) |
| INT pt3080PrecorrectorNonlinearAdaptiveMode | 1.3.6.1.4.1.193.223.2.3080.25.3 | INTEGER | read-write | selection of the operational mode for the non-linear adaptive precorrector (note: legacy term used for backward compatibility. IDLE Equal to the mode named MONITORING in the WEB GUI ) |
| INT pt3080PrecorrectorNonlinearMode | 1.3.6.1.4.1.193.223.2.3080.25.4 | INTEGER | read-write | selection of the operational mode for the non-linear precorrector (note: legacy term used for backward compatibility. MONITORING Equal to the mode named BYPASS in the WEB GUI ) |
| I32 pt3080PrecorrectorLastTurnAroundTime | 1.3.6.1.4.1.193.223.2.3080.25.6 | Integer32 | read-only | PrecorrectorLastTurnAroundTime |
| I32 pt3080PrecorrectorSecondsSinceLastUpdate | 1.3.6.1.4.1.193.223.2.3080.25.7 | Integer32 | read-only | PrecorrectorSecondsSinceLastUpdate |
| I32 pt3080PrecorrectorLinearMonitorSenseBadCount | 1.3.6.1.4.1.193.223.2.3080.25.8 | Integer32 | read-only | Number of bad/invalid sense counts, made by the linear adaptive precorrector. |
| I32 pt3080PrecorrectorNonlinearMonitorSenseBadCount | 1.3.6.1.4.1.193.223.2.3080.25.9 | Integer32 | read-only | Number of bad/invalid sense counts, made by the nonlinear adaptive precorrector. |
| INT pt3080PrecorrectorLinearAdaptiveAmplitudeRippleEnable | 1.3.6.1.4.1.193.223.2.3080.25.10 | INTEGER | read-write | Enable amplitude ripple as a trigger for the AUTORUN and RUNTOTARGET modes |
| INT pt3080PrecorrectorLinearAdaptiveGroupDelayEnable | 1.3.6.1.4.1.193.223.2.3080.25.11 | INTEGER | read-write | Enable group delay as a trigger for the AUTORUN and RUNTOTARGET modes |
| INT pt3080PrecorrectorNonlinearAdaptiveLowerShoulderEnable | 1.3.6.1.4.1.193.223.2.3080.25.12 | INTEGER | read-write | Enable shoulder level (lower) as a trigger for the AUTORUN and RUNTOTARGET modes |
| INT pt3080PrecorrectorNonlinearAdaptiveUpperShoulderEnable | 1.3.6.1.4.1.193.223.2.3080.25.13 | INTEGER | read-write | Enable shoulder level (upper) as a trigger for the AUTORUN and RUNTOTARGET modes |
| I32 pt3080PrecorrectorLinearAdaptiveAmplitudeRippleTargetHysteresis | 1.3.6.1.4.1.193.223.2.3080.25.14 | Integer32 | read-write | Define a adaptive target level hysteresis for the amplitude ripple |
| I32 pt3080PrecorrectorLinearAdaptiveGroupDelayTargetHysteresis | 1.3.6.1.4.1.193.223.2.3080.25.15 | Integer32 | read-write | Define a adaptive target level hysteresis for the group delay |
| I32 pt3080PrecorrectorNonlinearAdaptiveLowerShoulderTargetHysteresis | 1.3.6.1.4.1.193.223.2.3080.25.16 | Integer32 | read-write | Define a adaptive target level hysteresis for the lower shoulder |
| I32 pt3080PrecorrectorNonlinearAdaptiveUpperShoulderTargetHysteresis | 1.3.6.1.4.1.193.223.2.3080.25.17 | Integer32 | read-write | Define a adaptive target level hysteresis for the upper shoulder |
| I32 pt3080PrecorrectorLinCleanrun | 1.3.6.1.4.1.193.223.2.3080.25.18 | Integer32 | read-only | PrecorrectorLinCleanrun |
| I32 pt3080PrecorrectorLinearMonitorIterations | 1.3.6.1.4.1.193.223.2.3080.25.19 | Integer32 | read-only | Number of iterations made by the linear adaptive precorrector. |
| INT pt3080PrecorrectorLinearLoadNeutral | 1.3.6.1.4.1.193.223.2.3080.25.20 | INTEGER | read-write | PrecorrectorLinearLoadNeutral |
| INT pt3080PrecorrectorLinearLoadFactory | 1.3.6.1.4.1.193.223.2.3080.25.21 | INTEGER | read-write | PrecorrectorLinearLoadFactory |
| I32 pt3080PrecorrectorLinearMonitorSenseLevel | 1.3.6.1.4.1.193.223.2.3080.25.22 | Integer32 | read-only | Level meassured at the linear sense input with offset defined by attenuation |
| I32 pt3080PrecorrectorLinearMonitorSenseValid | 1.3.6.1.4.1.193.223.2.3080.25.23 | Integer32 | read-only | Is linear sense input information valid |
| INT pt3080PrecorrectorLinearMonitorStatus | 1.3.6.1.4.1.193.223.2.3080.25.24 | INTEGER | read-only | linear Precor state |
| INT pt3080PrecorrectorLinearUpdateFactoryCurve | 1.3.6.1.4.1.193.223.2.3080.25.25 | INTEGER | read-write | PrecorrectorLinearUpdateFactoryCurve |
| I32 pt3080PrecorrectorLinearMonitorAmplitudeRipple | 1.3.6.1.4.1.193.223.2.3080.25.26 | Integer32 | read-only | Amplitude ripple |
| I32 pt3080PrecorrectorLinearMonitorGroupDelay | 1.3.6.1.4.1.193.223.2.3080.25.27 | Integer32 | read-only | Group delay |
| I32 pt3080PrecorrectorNonlinearMonitorLowerShoulderLevel | 1.3.6.1.4.1.193.223.2.3080.25.28 | Integer32 | read-only | Lower shoulder level |
| I32 pt3080PrecorrectorNonlinearMonitorUpperShoulderLevel | 1.3.6.1.4.1.193.223.2.3080.25.29 | Integer32 | read-only | Upper shoulder level |
| I32 pt3080PrecorrectorLinearMonitorAmplitudeRippleValid | 1.3.6.1.4.1.193.223.2.3080.25.30 | Integer32 | read-only | Is amplitude ripple information valid |
| I32 pt3080PrecorrectorLinearMonitorGroupDelayValid | 1.3.6.1.4.1.193.223.2.3080.25.31 | Integer32 | read-only | Is group delay information valid |
| I32 pt3080PrecorrectorNonlinearMonitorLowerShoulderValid | 1.3.6.1.4.1.193.223.2.3080.25.32 | Integer32 | read-only | Is Lower shoulder information valid |
| I32 pt3080PrecorrectorNonlinearMonitorUpperShoulderValid | 1.3.6.1.4.1.193.223.2.3080.25.33 | Integer32 | read-only | Is Upper shoulder information valid |
| INT pt3080PrecorrectorNlinCleanrun | 1.3.6.1.4.1.193.223.2.3080.25.34 | INTEGER | read-only | PrecorrectorNlinCleanrun |
| I32 pt3080PrecorrectorNonlinearMonitorIterations | 1.3.6.1.4.1.193.223.2.3080.25.35 | Integer32 | read-only | Number of iterations made by the nonlinear adaptive precorrector. |
| INT pt3080PrecorrectorNonlinearLoadNeutral | 1.3.6.1.4.1.193.223.2.3080.25.36 | INTEGER | read-write | PrecorrectorNonlinearLoadNeutral |
| INT pt3080PrecorrectorNonlinearLoadFactory | 1.3.6.1.4.1.193.223.2.3080.25.37 | INTEGER | read-write | PrecorrectorNonlinearLoadFactory |
| I32 pt3080PrecorrectorNonlinearMonitorSenseLevel | 1.3.6.1.4.1.193.223.2.3080.25.38 | Integer32 | read-only | Level meassured at the Nonlinear sense input with offset defined by attenuation |
| I32 pt3080PrecorrectorNonlinearMonitorSenseValid | 1.3.6.1.4.1.193.223.2.3080.25.39 | Integer32 | read-only | Is Nonlinear sense input information valid |
| INT pt3080PrecorrectorNonlinearMonitorStatus | 1.3.6.1.4.1.193.223.2.3080.25.40 | INTEGER | read-only | Nonlinear Precor state |
| INT pt3080PrecorrectorNonlinearUpdateFactoryCurve | 1.3.6.1.4.1.193.223.2.3080.25.41 | INTEGER | read-write | PrecorrectorNonlinearUpdateFactoryCurve |
| I32 pt3080PrecorrectorLinearAdaptiveAmplitudeRippleTargetLevel | 1.3.6.1.4.1.193.223.2.3080.25.42 | Integer32 | read-write | Define a adaptive target level for the amplitude ripple |
| I32 pt3080PrecorrectorLinearAdaptiveGroupDelayTargetLevel | 1.3.6.1.4.1.193.223.2.3080.25.43 | Integer32 | read-write | Define a adaptive target level for the group delay |
| I32 pt3080PrecorrectorNonlinearAdaptiveLowerShoulderTargetLevel | 1.3.6.1.4.1.193.223.2.3080.25.44 | Integer32 | read-write | Define a adaptive target level for the lower shoulder |
| I32 pt3080PrecorrectorNonlinearAdaptiveUpperShoulderTargetLevel | 1.3.6.1.4.1.193.223.2.3080.25.45 | Integer32 | read-write | Define a adaptive target level for the upper shoulder |
| INT pt3080PrecorrectorLinearSenseEnable | 1.3.6.1.4.1.193.223.2.3080.25.46 | INTEGER | read-write | By using this, it is possible to control wether to use the linear Sense Input or not. |
| I32 pt3080PrecorrectorLinearMonitorDiscartedIterations | 1.3.6.1.4.1.193.223.2.3080.25.47 | Integer32 | read-only | Number of iterations discarded by the linear adaptive precorrector due to noisy signal samples. |
| INT pt3080PrecorrectorNonlinearSenseEnable | 1.3.6.1.4.1.193.223.2.3080.25.48 | INTEGER | read-write | By using this, it is possible to control wether to use the nonlinear Sense Input or not. |
| I32 pt3080PrecorrectorNonlinearMonitorDiscartedIterations | 1.3.6.1.4.1.193.223.2.3080.25.49 | Integer32 | read-only | Number of iterations discarded by the non-linear adaptive precorrector dur to noisy signal samples. |
| I32 pt3080PrecorrectorNonlinearMonitorMer | 1.3.6.1.4.1.193.223.2.3080.25.50 | Integer32 | read-only | MER |
| I32 pt3080PrecorrectorNonlinearMonitorMerValid | 1.3.6.1.4.1.193.223.2.3080.25.51 | Integer32 | read-only | Is MER information valid |
| I32 pt3080PrecorrectorNonlinearMonitorPapr | 1.3.6.1.4.1.193.223.2.3080.25.52 | Integer32 | read-only | PAPR level |
| I32 pt3080PrecorrectorNonlinearMonitorPaprValid | 1.3.6.1.4.1.193.223.2.3080.25.53 | Integer32 | read-only | Is Papr information valid |
| INT pt3080PrecorrectorNonlinearAdaptiveAveraging | 1.3.6.1.4.1.193.223.2.3080.25.54 | INTEGER | read-write | Choose wether or not to use averaging calulations |
| INT pt3080PrecorrectorNonlinearAdaptiveMaxRfPaprEnable | 1.3.6.1.4.1.193.223.2.3080.25.55 | INTEGER | read-write | Enable the modulator's output PAPR limiter function |
| I32 pt3080PrecorrectorNonlinearAdaptiveMaxRfPaprLimit | 1.3.6.1.4.1.193.223.2.3080.25.56 | Integer32 | read-write | Maximum RF PAPR Limitation |
| I32 pt3080PrecorrectorNonlinearAdaptiveMerTarget | 1.3.6.1.4.1.193.223.2.3080.25.57 | Integer32 | read-write | Define a target level for the MER |
| I32 pt3080PrecorrectorNonlinearAdaptiveMerTargetHysteresis | 1.3.6.1.4.1.193.223.2.3080.25.58 | Integer32 | read-write | Define a target MER hysteresis |
| INT pt3080PrecorrectorNonlinearAdaptiveMerEnable | 1.3.6.1.4.1.193.223.2.3080.25.59 | INTEGER | read-write | Enable MER as a trigger for the AUTORUN and RUNTOTARGET modes |
| I32 pt3080PrecorrectorPaprClipping | 1.3.6.1.4.1.193.223.2.3080.25.60 | Integer32 | read-write | set the built-in peak clipper function. The value 'max' corresponds to an unclipped COFDM signal (12dB peak to average ratio). The value 'min' correspondsto COFDM signal where all peaks >2dB above average power are clipped. When feeding the output from the modulator through an amplifier the best overall performance result is normally obtained if the clipper value used by modulator clips the signal just a fraction before the amplifier would clip the signal. |
| I32 pt3080PrecorrectorPaprShaping | 1.3.6.1.4.1.193.223.2.3080.25.61 | Integer32 | read-write | Set the output peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where the clipper noise is equally distributed below, inside and above the COFDM spectrum (clipper noise clearly visible in the form of noise above and below the spectrum. The value 'max' corresponds to maximum soft clipping where the clipper noise in the sidebands (above and below the COFDM spectrum) is subjected to maximum suppression while still maintaining the exact clipper value (peak-to-average-ration). The suppression of the sideband noise is obtained as a tradeoff against the in band performance. The clip filter setting is typically selected as a compromise between spectrum shoulder performance and in-band signal performance (MER). |
| INT pt3080PrecorrectorClipperAdaptiveMode | 1.3.6.1.4.1.193.223.2.3080.25.63 | INTEGER | read-write | Selection of the operational mode for the adaptive clipper function |
| INT pt3080PrecorrectorClipperMonitorStatus | 1.3.6.1.4.1.193.223.2.3080.25.64 | INTEGER | read-only | OptiClipper state |
| I32 pt3080PrecorrectorClipperMonitorShoulderLevelLower | 1.3.6.1.4.1.193.223.2.3080.25.65 | Integer32 | read-only | Lower shoulder level |
| I32 pt3080PrecorrectorClipperMonitorShoulderLevelLowerValid | 1.3.6.1.4.1.193.223.2.3080.25.66 | Integer32 | read-only | Is Lower shoulder information valid |
| I32 pt3080PrecorrectorClipperMonitorShoulderLevelUpper | 1.3.6.1.4.1.193.223.2.3080.25.67 | Integer32 | read-only | Upper shoulder level |
| I32 pt3080PrecorrectorClipperMonitorShoulderLevelUpperValid | 1.3.6.1.4.1.193.223.2.3080.25.68 | Integer32 | read-only | Is Upper shoulder information valid |
| I32 pt3080PrecorrectorClipperMonitorMer | 1.3.6.1.4.1.193.223.2.3080.25.69 | Integer32 | read-only | MER level |
| I32 pt3080PrecorrectorClipperMonitorMerValid | 1.3.6.1.4.1.193.223.2.3080.25.70 | Integer32 | read-only | Is MER information valid |
| I32 pt3080PrecorrectorClipperMonitorPapr | 1.3.6.1.4.1.193.223.2.3080.25.71 | Integer32 | read-only | PAPR level |
| I32 pt3080PrecorrectorClipperMonitorPaprValid | 1.3.6.1.4.1.193.223.2.3080.25.72 | Integer32 | read-only | Is Papr information valid |
| I32 pt3080PrecorrectorClipperMonitorIterations | 1.3.6.1.4.1.193.223.2.3080.25.73 | Integer32 | read-only | Number of Iterations performed by the OptiClipper algorithm |
| INT pt3080PrecorrectorClipperMode | 1.3.6.1.4.1.193.223.2.3080.25.74 | INTEGER | read-write | Selection between no, static (manual) and adaptive clipper function |
| I32 pt3080PrecorrectorClipperAdaptive | 1.3.6.1.4.1.193.223.2.3080.25.75 | Integer32 | read-only | Clipper shaped by the OptiClipper algorithm |
| INT pt3080PrecorrectorClipperEnable | 1.3.6.1.4.1.193.223.2.3080.25.76 | INTEGER | read-only | Clipper enable |
| I32 pt3080PrecorrectorNonlinearAttenuation | 1.3.6.1.4.1.193.223.2.3080.25.77 | Integer32 | read-write | Define a attenuation level for the sense input |
| I32 pt3080PrecorrectorLinearAttenuation | 1.3.6.1.4.1.193.223.2.3080.25.78 | Integer32 | read-write | Define a attenuation level for the sense input |
| I32 pt3080PrecorrectorLinearAdaptive | 1.3.6.1.4.1.193.223.2.3080.25.79 | Integer32 | read-only | Linear precorrection curve active in the system |
| I32 pt3080PrecorrectorNonlinearAdaptive | 1.3.6.1.4.1.193.223.2.3080.25.80 | Integer32 | read-only | Non-Linear precorrection curve active in the system |
| I32 pt3080PrecorrectorClipperAdaptiveShaping | 1.3.6.1.4.1.193.223.2.3080.25.81 | Integer32 | read-write | Depricated Therefore min and max value are set to 100% Set the peak shaping filter hardness. The value 'min' correspond to traditional 'hard-clipping' where the clipper noise is equally distributed below, inside and above the COFDM spectrum (clipper noise clearly visible in the form of noise above and below the spectrum. The value 'max' corresponds to maximum soft clipping where the clipper noise in the sidebands (above and below the COFDM spectrum) is subjected to maximum suppression while still maintaining the exact clipper value (peak-to-average-ration). The suppression of the sideband noise is obtained as a tradeoff against the in band performance. The clip filter setting is typically selected as a compromise between spectrum shoulder performance and in-band signal performance (MER). |
| pt3080Reception | 1.3.6.1.4.1.193.223.2.3080.26 | |||
| I32 pt3080ReceptionRFFrequency | 1.3.6.1.4.1.193.223.2.3080.26.1 | Integer32 | read-write | Defines the reception frequency for the tuner. |
| I32 pt3080ReceptionRFFrequencyOffset | 1.3.6.1.4.1.193.223.2.3080.26.2 | Integer32 | read-write | Defines the offset to be added to the reception frequency for the tuner. |
| INT pt3080ReceptionIFInputPolicy | 1.3.6.1.4.1.193.223.2.3080.26.3 | INTEGER | read-write | Controls RF/IF reception Policy |
| INT pt3080ReceptionIFFrequency | 1.3.6.1.4.1.193.223.2.3080.26.4 | INTEGER | read-write | Defines the reception frequency for the tuner. |
| INT pt3080ReceptionIFPolarity | 1.3.6.1.4.1.193.223.2.3080.26.5 | INTEGER | read-write | Controls IF reception Polarity |
| INT pt3080ReceptionRFSquelchEnable | 1.3.6.1.4.1.193.223.2.3080.26.6 | INTEGER | read-write | Controls the squelch function. |
| I32 pt3080ReceptionRFSquelchThreshold | 1.3.6.1.4.1.193.223.2.3080.26.7 | Integer32 | read-write | Defines the Squelch function threshold. |
| I32 pt3080ReceptionRFSquelchHysteresis | 1.3.6.1.4.1.193.223.2.3080.26.8 | Integer32 | read-write | Defines the Squelch function Hysteresis. |
| INT pt3080ReceptionGainControl | 1.3.6.1.4.1.193.223.2.3080.26.9 | INTEGER | read-write | Controls the gain function mode. |
| I32 pt3080ReceptionGainManualValue | 1.3.6.1.4.1.193.223.2.3080.26.10 | Integer32 | read-write | Defines manual gain value. |
| INT pt3080ReceptionGainLimitEnable | 1.3.6.1.4.1.193.223.2.3080.26.11 | INTEGER | read-write | Controls the Reception RF Gain limit function. |
| I32 pt3080ReceptionGainLimit | 1.3.6.1.4.1.193.223.2.3080.26.12 | Integer32 | read-write | Defines gain limit value. |
| I32 pt3080ReceptionGainCurrent | 1.3.6.1.4.1.193.223.2.3080.26.13 | Integer32 | read-only | The current total gain. |
| I32 pt3080ReceptionIFRFtoIFHoldoverDelay | 1.3.6.1.4.1.193.223.2.3080.26.18 | Integer32 | read-write | The holdover delay for switching reception from RF to IF input. |
| I32 pt3080ReceptionIFIFtoRFHoldoverDelay | 1.3.6.1.4.1.193.223.2.3080.26.19 | Integer32 | read-write | The holdover delay for switching reception from IF to RF input. |
| INT pt3080ReceptionIFInput | 1.3.6.1.4.1.193.223.2.3080.26.20 | INTEGER | read-only | Shows the current RF/IF input selected |
| I32 pt3080ReceptionRFInputLevel | 1.3.6.1.4.1.193.223.2.3080.26.21 | Integer32 | read-only | The current RF input level on the tuner. |
| I32 pt3080ReceptionIFInputLevel | 1.3.6.1.4.1.193.223.2.3080.26.22 | Integer32 | read-only | Shows the current IF input level |
| INT pt3080ReceptionBandwidth | 1.3.6.1.4.1.193.223.2.3080.26.23 | INTEGER | read-write | Controls reception bandwidth |
| INT pt3080ReceptionRFPolarity | 1.3.6.1.4.1.193.223.2.3080.26.24 | INTEGER | read-write | Controls RF reception Polarity |
| I32 pt3080ReceptionRFInputLevelHysteresis | 1.3.6.1.4.1.193.223.2.3080.26.25 | Integer32 | read-write | Defines the Input Level Hysteresis. |
| I32 pt3080ReceptionRFInputLevelThreshold | 1.3.6.1.4.1.193.223.2.3080.26.26 | Integer32 | read-write | Defines the Input level threshold. |
| INT pt3080ReceptionAGCMode | 1.3.6.1.4.1.193.223.2.3080.26.30 | INTEGER | read-write | Controls the AGC function mode. |
| I32 pt3080ReceptionAGCHysteresis | 1.3.6.1.4.1.193.223.2.3080.26.31 | Integer32 | read-write | Defines the AGC function Hysteresis. |
| INT pt3080ReceptionRFTrackingFilterEnable | 1.3.6.1.4.1.193.223.2.3080.26.35 | INTEGER | read-write | Controls the Reception RF Tracking Filter. |
| I32 pt3080ReceptionRFifLevel | 1.3.6.1.4.1.193.223.2.3080.26.36 | Integer32 | read-only | The current if level from the tuner. |
| I32 pt3080ReceptionRFNominalInputLevel | 1.3.6.1.4.1.193.223.2.3080.26.37 | Integer32 | read-write | The nominal input level on the tuner. The dynamic range of the tuner is from 20dB below nominal level to nominal level |
| STR pt3080ReceptionTunerHWVersion | 1.3.6.1.4.1.193.223.2.3080.26.40 | DisplayString | read-only | The tuner HW version. |
| STR pt3080ReceptionTunerHWType | 1.3.6.1.4.1.193.223.2.3080.26.41 | DisplayString | read-only | The tuner HW type. |
| STR pt3080ReceptionTunerHWID | 1.3.6.1.4.1.193.223.2.3080.26.42 | DisplayString | read-only | The tuner HW ID. |
| STR pt3080ReceptionTunerHWSerialNumber | 1.3.6.1.4.1.193.223.2.3080.26.43 | DisplayString | read-only | The tuner HW Serial Number. |
| STR pt3080ReceptionTunerHWCalibrationDate | 1.3.6.1.4.1.193.223.2.3080.26.44 | DisplayString | read-only | The tuner HW Calibration Date. |
| STR pt3080ReceptionTunerHWCalibrationDataVersion | 1.3.6.1.4.1.193.223.2.3080.26.45 | DisplayString | read-only | The tuner HW Calibration Data Version. |
| STR pt3080ReceptionTunerHWCalibrationSWVersion | 1.3.6.1.4.1.193.223.2.3080.26.46 | DisplayString | read-only | The tuner HW Calibration SW Version. |
| pt3080Backplane | 1.3.6.1.4.1.193.223.2.3080.27 | |||
| INT pt3080BackplanePolarityHardMute | 1.3.6.1.4.1.193.223.2.3080.27.1 | INTEGER | read-write | Set the polarity of the Hard Mute input pin on the PTT2 backplane. |
| INT pt3080BackplanePolarityRFFail | 1.3.6.1.4.1.193.223.2.3080.27.2 | INTEGER | read-write | Set the polarity of the RF Fail output pin on the PTT2 backplane. |
| pt3080ASI | 1.3.6.1.4.1.193.223.2.3080.30 | |||
| I32 pt3080ASIInput1SyncTimeout | 1.3.6.1.4.1.193.223.2.3080.30.1 | Integer32 | read-write | Specifies the maximum time accepted between received TS packages. |
| I32 pt3080ASIInput1DataErrorLimit | 1.3.6.1.4.1.193.223.2.3080.30.2 | Integer32 | read-write | Specifies the alarm limit for date error rate. |
| INT pt3080ASIInput1SyncStatus | 1.3.6.1.4.1.193.223.2.3080.30.3 | INTEGER | read-only | Current state of the sync detector |
| INT pt3080ASIInput1SyncSignal | 1.3.6.1.4.1.193.223.2.3080.30.4 | INTEGER | read-only | Current state of the sync detector signal type |
| INT pt3080ASIInput1SyncTSSize | 1.3.6.1.4.1.193.223.2.3080.30.5 | INTEGER | read-only | Current TS packet size determined by the sync detector |
| I32 pt3080ASIInput1LineErrors | 1.3.6.1.4.1.193.223.2.3080.30.6 | Integer32 | read-only | Counts the number of line errors including IDLE stuffing. |
| I32 pt3080ASIInput1LineRate | 1.3.6.1.4.1.193.223.2.3080.30.7 | Integer32 | read-only | Current line rate |
| I32 pt3080ASIInput1LineErrorRate | 1.3.6.1.4.1.193.223.2.3080.30.8 | Integer32 | read-only | Current line error rate |
| I32 pt3080ASIInput1DataErrors | 1.3.6.1.4.1.193.223.2.3080.30.9 | Integer32 | read-only | Counts the number of data errors excluding IDLE stuffing. |
| I32 pt3080ASIInput1DataRate | 1.3.6.1.4.1.193.223.2.3080.30.10 | Integer32 | read-only | Current data rate |
| I32 pt3080ASIInput1DataErrorRate | 1.3.6.1.4.1.193.223.2.3080.30.11 | Integer32 | read-only | Current data error rate |
| INT pt3080ASIInput1ClearErrorCounters | 1.3.6.1.4.1.193.223.2.3080.30.12 | INTEGER | read-write | Clear all error counters and reset all rates |
| I32 pt3080ASIInput2SyncTimeout | 1.3.6.1.4.1.193.223.2.3080.30.51 | Integer32 | read-write | Specifies the maximum time accepted between received TS packages. |
| I32 pt3080ASIInput2DataErrorLimit | 1.3.6.1.4.1.193.223.2.3080.30.52 | Integer32 | read-write | Specifies the alarm limit for date error rate. |
| INT pt3080ASIInput2SyncStatus | 1.3.6.1.4.1.193.223.2.3080.30.53 | INTEGER | read-only | Current state of the sync detector |
| INT pt3080ASIInput2SyncSignal | 1.3.6.1.4.1.193.223.2.3080.30.54 | INTEGER | read-only | Current state of the sync detector signal type |
| INT pt3080ASIInput2SyncTSSize | 1.3.6.1.4.1.193.223.2.3080.30.55 | INTEGER | read-only | Current TS packet size determined by the sync detector |
| I32 pt3080ASIInput2LineErrors | 1.3.6.1.4.1.193.223.2.3080.30.56 | Integer32 | read-only | Counts the number of line errors including IDLE stuffing. |
| I32 pt3080ASIInput2LineRate | 1.3.6.1.4.1.193.223.2.3080.30.57 | Integer32 | read-only | Current line rate |
| I32 pt3080ASIInput2LineErrorRate | 1.3.6.1.4.1.193.223.2.3080.30.58 | Integer32 | read-only | Current line error rate |
| I32 pt3080ASIInput2DataErrors | 1.3.6.1.4.1.193.223.2.3080.30.59 | Integer32 | read-only | Counts the number of data errors excluding IDLE stuffing. |
| I32 pt3080ASIInput2DataRate | 1.3.6.1.4.1.193.223.2.3080.30.60 | Integer32 | read-only | Current data rate |
| I32 pt3080ASIInput2DataErrorRate | 1.3.6.1.4.1.193.223.2.3080.30.61 | Integer32 | read-only | Current data error rate |
| INT pt3080ASIInput2ClearErrorCounters | 1.3.6.1.4.1.193.223.2.3080.30.62 | INTEGER | read-write | Clear all error counters and reset all rates |
| pt3080Notifs | 1.3.6.1.4.1.193.223.2.3080.64 | |||
| pt3080Notif | 1.3.6.1.4.1.193.223.2.3080.64.0 | |||
| NTF pt3080NotifModulatorAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.3 | Modulator Alarms | ||
| NTF pt3080NotifTSPrimaryAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.5 | ASI TS Primary Alarms | ||
| NTF pt3080NotifTSSecondaryAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.6 | ASI TS Secondary Alarms | ||
| NTF pt3080NotifSFNAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.7 | SFN Alarms | ||
| NTF pt3080NotifRefenceClockAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.8 | Reference Alarms | ||
| NTF pt3080NotifRFAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.9 | RF Alarms | ||
| NTF pt3080NotifGNSSAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.10 | GNSS Alarms | ||
| NTF pt3080NotifTSoIPAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.12 | TSoIP Alarms | ||
| NTF pt3080NotifExternalAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.13 | External Alarms | ||
| NTF pt3080NotifHWMonitorAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.14 | HW Monitor Alarms | ||
| NTF pt3080NotifCommAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.15 | Communications Alarms | ||
| NTF pt3080NotifASIAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.16 | ASI Alarms | ||
| NTF pt3080NotifInternalAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.18 | Internal Alarms | ||
| NTF pt3080NotifTSPrimarySyncLossAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.21 | TS Primary Sync Loss | ||
| NTF pt3080NotifTSPrimarySyncErrorAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.22 | TS Primary Sync Error | ||
| NTF pt3080NotifTSPrimaryPCRErrorAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.23 | TS Primary PCR Error | ||
| NTF pt3080NotifTSPrimaryPATLossAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.24 | TS Primary PAT Loss | ||
| NTF pt3080NotifTSPrimaryTSIDWrongAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.25 | TS Primary Transport Stream ID | ||
| NTF pt3080NotifTSPrimaryNWIDWrongAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.26 | TS Primary Network ID | ||
| NTF pt3080NotifTSPrimaryStuffingRateExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.27 | TS Primary Stuffing Rate | ||
| NTF pt3080NotifTSPrimaryBufferPoolExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.28 | TS Primary Buffer Pool | ||
| NTF pt3080NotifTSPrimarySTSJitterExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.29 | TS Primary STS Jitter | ||
| NTF pt3080NotifTSPrimaryMIPDataMissingAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.30 | TS Primary MIP Data Missing | ||
| NTF pt3080NotifTSPrimaryMIPPriorityBadAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.31 | TS Primary Bad Priority in MIP | ||
| NTF pt3080NotifTSSecondarySyncLossAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.32 | TS Secondary Sync Loss | ||
| NTF pt3080NotifTSSecondarySyncErrorAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.33 | TS Secondary Sync Error | ||
| NTF pt3080NotifTSSecondaryPCRErrorAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.34 | TS Secondary PCR Error | ||
| NTF pt3080NotifTSSecondaryPATLossAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.35 | TS Secondary PAT Loss | ||
| NTF pt3080NotifTSSecondaryTSIDWrongAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.36 | TS Secondary Transport Stream ID | ||
| NTF pt3080NotifTSSecondaryNWIDWrongAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.37 | TS Secondary Network ID | ||
| NTF pt3080NotifTSSecondaryStuffingRateExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.38 | TS Secondary Stuffing Rate | ||
| NTF pt3080NotifTSSecondaryBufferPoolExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.39 | TS Secondary Buffer Pool | ||
| NTF pt3080NotifTSSecondarySTSJitterExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.40 | TS Secondary STS Jitter | ||
| NTF pt3080NotifTSSecondaryMIPDataMissingAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.41 | TS Secondary MIP Data Missing | ||
| NTF pt3080NotifTSSecondaryMIPPriorityBadAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.42 | TS Secondary Bad Priority in MIP | ||
| NTF pt3080NotifRFOverloadProtectionAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.44 | Overload Protection | ||
| NTF pt3080NotifCommeth0Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.55 | ETH0 Conn. State | ||
| NTF pt3080NotifCommeth1Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.56 | ETH1 Conn. State | ||
| NTF pt3080NotifCommeth2Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.57 | ETH2 Conn. State | ||
| NTF pt3080NotifCommeth3Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.58 | ETH3 Conn. State | ||
| NTF pt3080NotifCommeth4Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.59 | ETH4 Conn. State | ||
| NTF pt3080NotifExternalInput1Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.72 | Alarm Input 1 | ||
| NTF pt3080NotifExternalInput2Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.73 | Alarm Input 2 | ||
| NTF pt3080NotifExternalInput3Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.74 | Alarm Input 3 | ||
| NTF pt3080NotifExternalInput4Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.75 | Alarm Input 4 | ||
| NTF pt3080NotifRefenceClockExtern1PPSLossAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.76 | Ext. 1PPS Loss | ||
| NTF pt3080NotifRefenceClockIntern1PPSLossAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.77 | Int. 10MHz Loss | ||
| NTF pt3080NotifRefenceClockExtern10MHzLossAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.78 | Ext. 10MHz Loss | ||
| NTF pt3080NotifRFAlcRangeAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.79 | ALC Range | ||
| NTF pt3080NotifSFNResyncAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.80 | SFN Resync Error | ||
| NTF pt3080NotifSFNTSPrimaryMaxDelayOffsetExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.81 | Primary SFN Max Delay + Offset OOR | ||
| NTF pt3080NotifSFNTSPrimaryNetworkDelayExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.82 | Primary SFN NW Delay Greater Than Max | ||
| NTF pt3080NotifSFNTSSecondaryMaxDelayOffsetExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.84 | Secondary SFN Max. Delay + Offset OOR | ||
| NTF pt3080NotifSFNTSSecondaryNetworkDelayExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.85 | Secondary SFN NW Delay Greater Than Max | ||
| NTF pt3080NotifRFLevelOutOfRangeAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.87 | RF Level Out of Range | ||
| NTF pt3080NotifRefenceClockNTPSyncLossAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.89 | NTP Sync Loss | ||
| NTF pt3080NotifSFNTSPrimarySeamlessDelayTooSmallAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.92 | Primary Delay Margin too Small for Seamless and Holdover | ||
| NTF pt3080NotifSFNTSPrimaryMIPConfigErrorAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.93 | Primary SFN and MIP Config Differ | ||
| NTF pt3080NotifSFNTSSecondarySeamlessDelayTooSmallAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.94 | Secondary Delay Margin too Small for Seamless and Holdover | ||
| NTF pt3080NotifSFNTSSecondaryMIPConfigErrorAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.95 | Secondary SFN and MIP Config Differ | ||
| NTF pt3080NotifGNSSUnlockedAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.98 | GNSS Unlocked | ||
| NTF pt3080NotifGNSSAntennaFaultAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.107 | GNSS Antenna Fault | ||
| NTF pt3080NotifGNSSHoldOverAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.108 | GNSS Holdover | ||
| NTF pt3080NotifRefenceClockExternal10MHzHoldOverAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.109 | Ext. 10MHz Ref Holdover | ||
| NTF pt3080NotifRefenceClockExternal1PPSHoldOverAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.110 | Ext. 1PPS Ref Holdover | ||
| NTF pt3080NotifASIASI1ErrorRateEceeededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.113 | ASI-IN1 Error Rate | ||
| NTF pt3080NotifASIASI2ErrorRateEceeededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.114 | ASI-IN2 Error Rate | ||
| NTF pt3080NotifTSoIPRx1PackageErrorRationExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.115 | TSoIP RX1 Package Error Ratio Exceeded | ||
| NTF pt3080NotifTSoIPRx2PackageErrorRationExceededAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.117 | TSoIP RX2 Package Error Ratio Exceeded | ||
| NTF pt3080NotifTSoIPRx1SyncLossAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.119 | TSoIP RX1 Signal Loss | ||
| NTF pt3080NotifTSoIPRx2SyncLossAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.121 | TSoIP RX2 Signal Loss | ||
| NTF pt3080NotifInternalBackplaneAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.129 | Backplane Status | ||
| NTF pt3080NotifInternalReferenceClockAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.132 | Reference Status | ||
| NTF pt3080NotifInternalUpConverterAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.134 | Upconverter Status | ||
| NTF pt3080NotifInternalDownConverterAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.135 | Downconverter Status | ||
| NTF pt3080NotifInternalMainboardAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.136 | Main board Status | ||
| NTF pt3080NotifInternalBatteryAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.137 | Main Board Battery | ||
| NTF pt3080NotifInternalFirmware1Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.139 | Firmware 1 Status | ||
| NTF pt3080NotifInternalGNSSAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.142 | GNSS Status | ||
| NTF pt3080NotifInternalSatelliteAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.143 | Satrecv Status | ||
| NTF pt3080NotifInternalEthAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.146 | EtherNet Port Failure | ||
| NTF pt3080NotifHWMonitorFPGAAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.156 | Main Board FPGA Temperature | ||
| NTF pt3080NotifHWMonitorMainBoardCPUTemperatureAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.157 | Main Board CPU Temperature | ||
| NTF pt3080NotifHWMonitorMainBoardTemperatureAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.158 | Main Board Temperature | ||
| NTF pt3080NotifHWMonitorLeftFanAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.159 | Left Chassis Fan | ||
| NTF pt3080NotifHWMonitorRightFan2Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.160 | Right Chassis Fan | ||
| NTF pt3080NotifHWMonitorBackplaneTemperatureAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.162 | Backplane Temperature | ||
| NTF pt3080NotifTSPrimaryInputTSHoldOverAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.180 | Input TS Holdover | ||
| NTF pt3080NotifInternalPLLUnlockedAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.182 | PLL Out of Lock | ||
| NTF pt3080NotifExternalInput5Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.183 | Alarm Input 5 | ||
| NTF pt3080NotifSFNUntimedModeAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.184 | SFN Mode Untimed | ||
| NTF pt3080NotifSFNFreeRunningModeAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.185 | SFN Mode Free Running | ||
| NTF pt3080NotifExternalInput6Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.186 | Alarm Input 6 | ||
| NTF pt3080NotifExternalInput7Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.187 | Alarm Input 7 | ||
| NTF pt3080NotifExternalInput8Alarm | 1.3.6.1.4.1.193.223.2.3080.64.0.188 | Alarm Input 8 | ||
| NTF pt3080NotifTSPrimaryDelayMarginAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.190 | TS Primary Delay Margin | ||
| NTF pt3080NotifTSSecondaryDelayMarginAlarm | 1.3.6.1.4.1.193.223.2.3080.64.0.191 | TS Secondary Delay Margin | ||
| STR pt3080NotifMessage | 1.3.6.1.4.1.193.223.2.3080.64.1 | DisplayString | accessible-for-notify | The current alarm notification message |
| INT pt3080NotifState | 1.3.6.1.4.1.193.223.2.3080.64.2 | INTEGER | accessible-for-notify | The current alarm notification state |
| DAT pt3080NotifLocalTime | 1.3.6.1.4.1.193.223.2.3080.64.3 | DateAndTime | accessible-for-notify | The time the current alarm notification state changed |
| pt3080Conformance | 1.3.6.1.4.1.193.223.2.3080.100 | |||
| pt3080Compliances | 1.3.6.1.4.1.193.223.2.3080.100.1 | |||
| pt3080Compliance | 1.3.6.1.4.1.193.223.2.3080.100.1.1 | The compliance statement for systems supporting the this MIB. | ||
| pt3080Groups | 1.3.6.1.4.1.193.223.2.3080.100.2 | |||
| pt3080SystemGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.1 | System group | ||
| pt3080ModeGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.2 | DVB-T Mode group | ||
| pt3080InputGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.3 | Input group | ||
| pt3080OutputGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.4 | Output group | ||
| pt3080GpsGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.7 | GPS group | ||
| pt3080ChannelFilterGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.8 | Channel Filter group | ||
| pt3080TSoIPGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.10 | TSoIP group | ||
| pt3080MonitorGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.12 | Signal monitor group | ||
| pt3080TestGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.13 | Test Signal group | ||
| pt3080AlarmGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.14 | Alarm group | ||
| pt3080PresetGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.15 | Preset group | ||
| pt3080EventlogGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.16 | Eventlog group | ||
| pt3080CommsGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.17 | Data network communications group | ||
| pt3080DemodulatorGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.24 | Demodulator group | ||
| pt3080PrecorrectorGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.25 | Precorrector group | ||
| pt3080ReceptionGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.26 | Reception group | ||
| pt3080BackplaneGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.27 | Backplane group | ||
| pt3080ASIGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.30 | ASI media group | ||
| pt3080NotifsGroup | 1.3.6.1.4.1.193.223.2.3080.100.2.64 | Notification objects group | ||
| pt3080Agent | 1.3.6.1.4.1.193.223.2.3080.100.3 | PT2080 DVB-T/H Modulator agent | ||
| pt3080NotificationsGroups | 1.3.6.1.4.1.193.223.2.3080.100.4 | |||
| pt3080NotifGroupModulatorAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.3 | Modulator Alarms | ||
| pt3080NotifGroupTSPrimaryAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.5 | ASI TS Primary Alarms | ||
| pt3080NotifGroupTSSecondaryAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.6 | ASI TS Secondary Alarms | ||
| pt3080NotifGroupSFNAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.7 | SFN Alarms | ||
| pt3080NotifGroupRefenceClockAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.8 | Reference Alarms | ||
| pt3080NotifGroupRFAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.9 | RF Alarms | ||
| pt3080NotifGroupGNSSAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.10 | GNSS Alarms | ||
| pt3080NotifGroupTSoIPAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.12 | TSoIP Alarms | ||
| pt3080NotifGroupExternalAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.13 | External Alarms | ||
| pt3080NotifGroupHWMonitorAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.14 | HW Monitor Alarms | ||
| pt3080NotifGroupCommAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.15 | Communications Alarms | ||
| pt3080NotifGroupASIAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.16 | ASI Alarms | ||
| pt3080NotifGroupInternalAlarm | 1.3.6.1.4.1.193.223.2.3080.100.4.18 | Internal Alarms |
RFC description
ProTelevision PT3080 DVB-T/H modulator monitoring and configuration management.
Start monitoring ProTelevision Technologies PT3080 DVB-T/H modulator with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.