All MIBs › PRVT-RSVP-MIB › prvtRsvpProductPSRFlags
prvtRsvpProductPSRFlags
Module: PRVT-RSVP-MIB
OID (symbolic): PRVT-RSVP-MIB::prvtRsvpProductPSRFlags
OID (numeric): 1.3.6.1.4.1.738.1.6.5.7.1.1.1.33
Node type: OBJECT-TYPE
Type: Bits
Access: read-create
Description: This field is used by PRVT-RSVP to determine whether it should set the Path State Removed flag on a PathErr (and therefore remove corresponding state and generate a PathTear). Each bit of this flags field corresponds to a situation where PRVT-RSVP may generate a PathErr. Setting a particular bit will result in PRVT-RSVP removing state, setting the Path State Removed flag and generating a PathTear in that corresponding situation. The possible bit values are
- pathErrPSRSet: PRVT-RSVP has received a PathErr message with the Path State Removed flag set.
- pathErrPSRNotSet: PRVT-RSVP has received a PathErr message with the Path State Removed flag unset.
- ldbCommonRcvd: PRVT-RSVP has received a negative response to an ATG_LDB_RESERVE_LSP_XC or ATG_LDB_CONNECT_LSP_XC message.
- ldbPreempted: PRVT-RSVP has received a Preemption message from Label Manager.
- routingError: PRVT-RSVP has received a Negative response to an ATG_IPR_QUERY_ROUTE message.
- invalidPathMsg: PRVT-RSVP has received an invalid Path message.
- sessionExpired: A session in PRVT-RSVP has expired.
- unableToRepairRoute: A route has been removed and PRVT-RSVP is unable to start local repair.
- unableToRepairIf: An interface has been removed and PRVT-RSVP is unable start local repair.
- reachedRetryLimit: An initial Path Message has reached its retry limit.
- unableToRefresh: PRVT-RSVP has been unable to refresh an LSP.
- resvErrTurnaround: PRVT-RSVP has received a ResvErr at the Egress node containing a REROUTING object and this is to be turned round into a PathErr.
- incomingIfDown: The incoming MPLS data interface for an LSP has been deactivated.
- outgoingIfDown: The outgoing MPLS data interface for an LSP has been deactivated.
What is prvtRsvpProductPSRFlags?
A bitmask (default no bits set) controlling, per error condition, whether RSVP sets the Path State Removed flag and generates a PathTear — for example on an invalid Path message, a session expiring, or an incoming/outgoing interface going down. Each of the 14 defined bits corresponds to one specific failure scenario an admin can choose to treat as state-clearing versus leaving to standard RSVP recovery.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6 | ipSwitch | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6.5 | mpls | PRVT-CR-LDP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.738.1.6.5.7 | prvtRsvp | PRVT-RSVP-MIB |
| 1.3.6.1.4.1.738.1.6.5.7.1 | prvtRsvpObjects | PRVT-RSVP-MIB |
| 1.3.6.1.4.1.738.1.6.5.7.1.1 | prvtRsvpProductTable | PRVT-RSVP-MIB |
| 1.3.6.1.4.1.738.1.6.5.7.1.1.1 | prvtRsvpProductEntry | PRVT-RSVP-MIB |
| 1.3.6.1.4.1.738.1.6.5.7.1.1.1.33 | prvtRsvpProductPSRFlags | PRVT-RSVP-MIB |