All MIBs › PRVT-RSVP-MIB › prvtRsvpProductLSPHoldingPriority
prvtRsvpProductLSPHoldingPriority
Module: PRVT-RSVP-MIB
OID (symbolic): PRVT-RSVP-MIB::prvtRsvpProductLSPHoldingPriority
OID (numeric): 1.3.6.1.4.1.738.1.6.5.7.1.1.1.19
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: The holding priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically less or equal (so higher or equal priority) than the value of the holding priority object.
What is prvtRsvpProductLSPHoldingPriority?
The default LSP holding priority (0=highest, 7=lowest, default 3) applied to LSPs that don't signal their own priority. Must be numerically equal to or less than the setup priority, so an established LSP is at least as hard to preempt as it was to set up.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6 | ipSwitch | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6.5 | mpls | PRVT-CR-LDP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.738.1.6.5.7 | prvtRsvp | PRVT-RSVP-MIB |
| 1.3.6.1.4.1.738.1.6.5.7.1 | prvtRsvpObjects | PRVT-RSVP-MIB |
| 1.3.6.1.4.1.738.1.6.5.7.1.1 | prvtRsvpProductTable | PRVT-RSVP-MIB |
| 1.3.6.1.4.1.738.1.6.5.7.1.1.1 | prvtRsvpProductEntry | PRVT-RSVP-MIB |
| 1.3.6.1.4.1.738.1.6.5.7.1.1.1.19 | prvtRsvpProductLSPHoldingPriority | PRVT-RSVP-MIB |