PRVT-RSVP-MIB :: prvtRsvpProductIpv6AdminStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PRVT-RSVP-MIB › prvtRsvpProductIpv6AdminStatus

prvtRsvpProductIpv6AdminStatus

Module: PRVT-RSVP-MIB

OID (symbolic): PRVT-RSVP-MIB::prvtRsvpProductIpv6AdminStatus

OID (numeric): 1.3.6.1.4.1.738.1.6.5.7.1.1.1.58

Node type: OBJECT-TYPE

Type: PrvtRsvpAdminStatus

Access: read-write

Description: Specifies whether the local node supports IPv6 LSPs.

Setting this to UP means that this node supports IPv6 LSPs being set up to, from and through this node.

Setting this to DOWN means that IPv6 LSPs are NOT supported by this node. Existing IPv6 LSPs for which this node is the ingress, egress or transit are torn down.

This field can be modified while RSVP is oper_status UP or DOWN.

The value of this field MUST match the value of the dcMplsTeMibRsvpIpv6AdminStatus field in the prvtMplsTeMibEntityTable.

What is prvtRsvpProductIpv6AdminStatus?

The desired administrative state (default down) of IPv6 LSP support at this node; setting it up allows IPv6 LSPs to originate, terminate, or transit here, while setting it down tears down any existing IPv6 LSPs through this node. It must be kept in sync with the corresponding field in the TE-MIB entity table.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.738.1.6.5.7.1.1.1.58
snmpwalk -v2c -c public <target> PRVT-RSVP-MIB::prvtRsvpProductIpv6AdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.738.1.6.5.7.1.1.1.58.1
snmpget -v2c -c public <target> PRVT-RSVP-MIB::prvtRsvpProductIpv6AdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.738.1.6.5.7.1.1.1.58.1 s <value>

Start monitoring BATM Advanced Communication MPLS/Carrier Ethernet switches (RSVP-TE signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRVT-RSVP-MIB::prvtRsvpProductIpv6AdminStatus OID value, configure state conditions and alerts, and monitor any BATM Advanced Communication MPLS/Carrier Ethernet switches (RSVP-TE signaling) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.738privateVendorOIDPRIV-VENDORDEF-MIB
1.3.6.1.4.1.738.1prvt_productsPRVT-SWITCH-MIB
1.3.6.1.4.1.738.1.6ipSwitchPRVT-SWITCH-MIB
1.3.6.1.4.1.738.1.6.5mplsPRVT-CR-LDP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.738.1.6.5.7prvtRsvpPRVT-RSVP-MIB
1.3.6.1.4.1.738.1.6.5.7.1prvtRsvpObjectsPRVT-RSVP-MIB
1.3.6.1.4.1.738.1.6.5.7.1.1prvtRsvpProductTablePRVT-RSVP-MIB
1.3.6.1.4.1.738.1.6.5.7.1.1.1prvtRsvpProductEntryPRVT-RSVP-MIB
1.3.6.1.4.1.738.1.6.5.7.1.1.1.58prvtRsvpProductIpv6AdminStatusPRVT-RSVP-MIB