All MIBs › PRVT-MPLS-TE-MIB › mplsTunnelErrorCode
mplsTunnelErrorCode
Module: PRVT-MPLS-TE-MIB
OID (symbolic): PRVT-MPLS-TE-MIB::mplsTunnelErrorCode
OID (numeric): 1.3.6.1.4.1.738.1.6.5.2.1.18.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The primary error code associated with the last error. The interpretation of this error code depends on the value of mplsTunnelErrorLastErrorType. If the value of mplsTunnelErrorLastErrorType is noError (0) the value of this object should be 0 and should be ignored. If the value of mplsTunnelErrorLastErrorType is protocol (2) the error should be interpreted in the context of the signling protocol identified by the mplsTunnelSignallingProto object.
Values in excess 32767 of are not used by signaling protocols and may safely be used as implementation-specific error codes.
What is mplsTunnelErrorCode?
The primary error code for this tunnel's last error; its interpretation depends on mplsTunnelErrorLastErrorType, e.g. for protocol(2) errors it's read in the context of the signaling protocol named in mplsTunnelSignallingProto. Codes above 32767 are reserved for implementation-specific use rather than the signaling protocols themselves.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.738.1.6.5.2.1.18.1.5 snmpwalk -v2c -c public <target> PRVT-MPLS-TE-MIB::mplsTunnelErrorCode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.738.1.6.5.2.1.18.1.5.1 snmpget -v2c -c public <target> PRVT-MPLS-TE-MIB::mplsTunnelErrorCode.1
Start monitoring BATM Advanced Communications MPLS-capable router/switch (MPLS TE tunnels) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRVT-MPLS-TE-MIB::mplsTunnelErrorCode OID value, configure state conditions and alerts, and monitor any BATM Advanced Communications MPLS-capable router/switch (MPLS TE tunnels) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6 | ipSwitch | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6.5 | mpls | PRVT-CR-LDP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.738.1.6.5.2 | mplsTeMIB | PRVT-MPLS-TE-MIB |
| 1.3.6.1.4.1.738.1.6.5.2.1 | mplsTeObjects | PRVT-MPLS-TE-MIB |
| 1.3.6.1.4.1.738.1.6.5.2.1.18 | mplsTunnelErrorTable | PRVT-MPLS-TE-MIB |
| 1.3.6.1.4.1.738.1.6.5.2.1.18.1 | mplsTunnelErrorEntry | PRVT-MPLS-TE-MIB |
| 1.3.6.1.4.1.738.1.6.5.2.1.18.1.5 | mplsTunnelErrorCode | PRVT-MPLS-TE-MIB |