All MIBs › PRVT-MPLS-TE-MIB › mplsTunnelARHopAddrType
mplsTunnelARHopAddrType
Module: PRVT-MPLS-TE-MIB
OID (symbolic): PRVT-MPLS-TE-MIB::mplsTunnelARHopAddrType
OID (numeric): 1.3.6.1.4.1.738.1.6.5.2.1.7.1.3
Node type: OBJECT-TYPE
Type: TeHopAddressType
Access: read-only
Description: The Hop Address Type of this tunnel hop.
If the type value is set to ipv4(1) or ipv6(2). The tunnel path can be determin using mplsTunnelARHopIpAddr object. mplsTunnelARHopAddrUnnum and mplsTunnelARHopLspId should not be used.
If the type value is set to unnum(4) or unnumv6(6). The tunnel path can be determin using mplsTunnelARHopAddrUnnum object. mplsTunnelARHopIpAddr and mplsTunnelARHopLspId should not be used.
Note that lspid(5) is a valid option only for tunnels signaled via CRLDP. The tunnel path can be determin using mplsTunnelARHopLspId object. mplsTunnelARHopIpAddr and mplsTunnelARHopAddrUnnum should not be used.
Currently only ipv4(1) type is supported
What is mplsTunnelARHopAddrType?
The address type of this actual (reported) route hop, as signaled back by the network: ipv4/ipv6, unnumbered, or (for CRLDP tunnels) lspid. The MIB notes that currently only ipv4(1) is actually supported by this implementation, and the corresponding address field to read depends on which type this shows.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.738.1.6.5.2.1.7.1.3 snmpwalk -v2c -c public <target> PRVT-MPLS-TE-MIB::mplsTunnelARHopAddrType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.738.1.6.5.2.1.7.1.3.1 snmpget -v2c -c public <target> PRVT-MPLS-TE-MIB::mplsTunnelARHopAddrType.1
Start monitoring BATM Advanced Communications MPLS-capable router/switch (MPLS TE tunnels) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRVT-MPLS-TE-MIB::mplsTunnelARHopAddrType OID value, configure state conditions and alerts, and monitor any BATM Advanced Communications MPLS-capable router/switch (MPLS TE tunnels) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6 | ipSwitch | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6.5 | mpls | PRVT-CR-LDP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.738.1.6.5.2 | mplsTeMIB | PRVT-MPLS-TE-MIB |
| 1.3.6.1.4.1.738.1.6.5.2.1 | mplsTeObjects | PRVT-MPLS-TE-MIB |
| 1.3.6.1.4.1.738.1.6.5.2.1.7 | mplsTunnelARHopTable | PRVT-MPLS-TE-MIB |
| 1.3.6.1.4.1.738.1.6.5.2.1.7.1 | mplsTunnelARHopEntry | PRVT-MPLS-TE-MIB |
| 1.3.6.1.4.1.738.1.6.5.2.1.7.1.3 | mplsTunnelARHopAddrType | PRVT-MPLS-TE-MIB |