All MIBs › PRVT-LMGR-MIB › prvtLmgrLsrEntityLsrId
prvtLmgrLsrEntityLsrId
Module: PRVT-LMGR-MIB
OID (symbolic): PRVT-LMGR-MIB::prvtLmgrLsrEntityLsrId
OID (numeric): 1.3.6.1.4.1.738.1.6.5.4.1.2.1.9
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: An ID that uniquely identifies this LSR within the network.
The LSR ID is typically derived from one of the LSR's IP addresses. It may be used for path vector based loop detection if the signaling protocol in use implements that.
A value of zero indicates that no LSR ID has been configured. In this case, the signaling protocol stack should construct a unique LSR ID from the other information that is available to it (such as IP addresses). For example, PRVT-CR-LDP and PRVT-RSVP derive the LSR ID by taking the 32 low bits of the following _transport_address_ field, left padding with zeros if necessary.
The LSR ID is only used to identify this LSR on IPv4 networks. See dcLmgrLsrEntityIpv6TranAddr for equivalent function for use in IPv6 networks.
What is prvtLmgrLsrEntityLsrId?
Read-only ID uniquely identifying this LSR within the network, typically derived from one of the LSR's own IP addresses and usable for path-vector loop detection; a value of zero means no LSR ID is set and one is derived automatically. This field only applies to IPv4 -- see prvtLmgrLsrEntityIpv6TranAddr for the IPv6 equivalent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.738.1.6.5.4.1.2.1.9 snmpwalk -v2c -c public <target> PRVT-LMGR-MIB::prvtLmgrLsrEntityLsrId
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.738.1.6.5.4.1.2.1.9.1 snmpget -v2c -c public <target> PRVT-LMGR-MIB::prvtLmgrLsrEntityLsrId.1
Start monitoring BATM Advanced Communications network devices (feature license manager) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRVT-LMGR-MIB::prvtLmgrLsrEntityLsrId OID value, configure state conditions and alerts, and monitor any BATM Advanced Communications network devices (feature license manager) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6 | ipSwitch | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.6.5 | mpls | PRVT-CR-LDP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.738.1.6.5.4 | prvtLmgr | PRVT-LMGR-MIB |
| 1.3.6.1.4.1.738.1.6.5.4.1 | prvtLmgrObjects | PRVT-LMGR-MIB |
| 1.3.6.1.4.1.738.1.6.5.4.1.2 | prvtLmgrLsrEntityTable | PRVT-LMGR-MIB |
| 1.3.6.1.4.1.738.1.6.5.4.1.2.1 | prvtLmgrLsrEntityEntry | PRVT-LMGR-MIB |
| 1.3.6.1.4.1.738.1.6.5.4.1.2.1.9 | prvtLmgrLsrEntityLsrId | PRVT-LMGR-MIB |