All MIBs › PKTC-IETF-SIG-MIB › pktcSigPulseSignalRepeatCount
pktcSigPulseSignalRepeatCount
Module: PKTC-IETF-SIG-MIB
OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigPulseSignalRepeatCount
OID (numeric): 1.3.6.1.2.1.169.1.1.20.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies how many times to repeat a pulse. This object is not used by the enableMeterPulse signal type, and in that case, the value is irrelevant. The following table defines the default values and the valid ranges for this object, depending on the signal type:
pktcSigPulseSignaltype Default Range
initialRing 1 1-5 pulseLoopClose 1 1-50 pulseLoopOpen 1 1-50 enableMeterPulse (any value)(but not used) meterPulseBurst 1 1-50 pulseNoBattery 1 1-50 pulseNormalPolarity 1 1-50 pulseReducedBattery 1 1-50 pulseReversePolarity 1 1-50
An attempt to set this object to a value that does not fall within the range for the specific signal type will result in an 'inconsistentValue' error.
What is pktcSigPulseSignalRepeatCount?
Sets how many times a pulse signal repeats (1-50, default 1 for most types); not used at all for the meter-pulse-enable signal type, where its value is simply ignored.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.1.20.1.6 snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigPulseSignalRepeatCount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.1.20.1.6.1 snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigPulseSignalRepeatCount.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.169.1.1.20.1.6.1 i <value>
Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigPulseSignalRepeatCount OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.169 | pktcIetfSigMib | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1 | pktcSigMibObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1 | pktcSigDevObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1.20 | pktcSigPulseSignalTable | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1.20.1 | pktcSigPulseSignalEntry | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1.20.1.6 | pktcSigPulseSignalRepeatCount | PKTC-IETF-SIG-MIB |