All MIBs › PKTC-IETF-SIG-MIB › pktcSigPulseSignalPulseInterval
pktcSigPulseSignalPulseInterval
Module: PKTC-IETF-SIG-MIB
OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigPulseSignalPulseInterval
OID (numeric): 1.3.6.1.2.1.169.1.1.20.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the repeat interval, or the period, for each signal type. In addition, the MTA must accept the values in the incremental steps specific for each signal type. The following table defines the default values and the incremental steps for this object, depending on the signal type:
pktcSigPulseSignaltype Default (ms) Increment (ms) initialRing 200 50 pulseLoopClose 1000 10 pulseLoopOpen 1000 10
enableMeterPulse 1000 10 meterPulseBurst 1000 10 pulseNoBattery 1000 10 pulseNormalPolarity 1000 10 pulseReducedBattery 1000 10 pulseReversePolarity 1000 10
An attempt to set this object to a value that does not fall on one of the increment boundaries, or on the wrong increment boundary for the specific signal type, will result in an 'inconsistentValue' error.
What is pktcSigPulseSignalPulseInterval?
Sets, in milliseconds, the repeat period between pulses for a given signal type; like the duration setting, each signal type only accepts values on its own increment boundary.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.1.20.1.5 snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigPulseSignalPulseInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.1.20.1.5.1 snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigPulseSignalPulseInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.169.1.1.20.1.5.1 i <value>
Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigPulseSignalPulseInterval OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.169 | pktcIetfSigMib | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1 | pktcSigMibObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1 | pktcSigDevObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1.20 | pktcSigPulseSignalTable | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1.20.1 | pktcSigPulseSignalEntry | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1.20.1.5 | pktcSigPulseSignalPulseInterval | PKTC-IETF-SIG-MIB |