PKTC-IETF-SIG-MIB :: pktcSigEndPntStatusError

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PKTC-IETF-SIG-MIB › pktcSigEndPntStatusError

pktcSigEndPntStatusError

Module: PKTC-IETF-SIG-MIB

OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigEndPntStatusError

OID (numeric): 1.3.6.1.2.1.169.1.2.1.1.31

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object contains the error status for this interface. The operational status indicates that all operations necessary to put the line in service have occurred, and the CMS has acknowledged the Restart In Progress (RSIP) message successfully. If pktcMtaDevCmsIpsecCtrl is enabled for the associated call agent, the noSecurityAssociation status indicates that no Security Association (SA) yet exists for this endpoint. If pktcMtaDevCmsIpsecCtrl is disabled for the associated call agent, the noSecurityAssociation status is not applicable and should not be used by the MTA. The disconnected status indicates one of the following two: If pktcMtaDevCmsIpsecCtrl is disabled, then no security association is involved with this endpoint. The NCS signaling software is in process of establishing the NCS signaling link via an RSIP exchange. Otherwise, when pktcMtaDevCmsIpsecCtrl is enabled, security Association has been established, and the NCS signaling software is in process of establishing the NCS signaling link via an RSIP exchange.

What is pktcSigEndPntStatusError?

Read-only signaling status for this line: operational means the line is fully in service and the call agent acknowledged its restart; noSecurityAssociation means IPsec is required but no security association exists yet; disconnected means the NCS signaling link is still being established via an RSIP exchange.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.2.1.1.31
snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigEndPntStatusError

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.2.1.1.31.1
snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigEndPntStatusError.1

Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigEndPntStatusError OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.169pktcIetfSigMibPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1pktcSigMibObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.2pktcSigEndPntConfigObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.2.1pktcSigEndPntConfigTablePKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.2.1.1pktcSigEndPntConfigEntryPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.2.1.1.31pktcSigEndPntStatusErrorPKTC-IETF-SIG-MIB