PKTC-IETF-SIG-MIB :: pktcSigEndPntConfigMinHookFlash

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PKTC-IETF-SIG-MIB › pktcSigEndPntConfigMinHookFlash

pktcSigEndPntConfigMinHookFlash

Module: PKTC-IETF-SIG-MIB

OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigEndPntConfigMinHookFlash

OID (numeric): 1.3.6.1.2.1.169.1.2.1.1.32

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This is the minimum time a line needs to be on-hook for a valid hook flash. The value of this object MUST be greater than the value of pktcSigEndPntConfigPulseDialMaxBreakTime. The value of pktcSigEndPntConfigMinHookFlash MUST be less than pktcSigEndPntConfigMaxHookFlash. This object MUST only be set via the MTA configuration during the provisioning process. Furthermore, given the possibility for the 'pulse dial' and 'hook flash' to overlap, the value of this object MUST be greater than the value contained by the MIB Object 'pktcSigEndPntConfigPulseDialMaxMakeTime'.

What is pktcSigEndPntConfigMinHookFlash?

Sets, in milliseconds (20-1550, default 300), the minimum on-hook time that counts as a valid hook-flash (rather than a hangup); must be provisioned via the MTA config file, and must be greater than both the max pulse-dial break time and max make time to avoid ambiguity between pulse dialing and hook-flash detection.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.2.1.1.32
snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigEndPntConfigMinHookFlash

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.2.1.1.32.1
snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigEndPntConfigMinHookFlash.1

Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigEndPntConfigMinHookFlash OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.169pktcIetfSigMibPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1pktcSigMibObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.2pktcSigEndPntConfigObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.2.1pktcSigEndPntConfigTablePKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.2.1.1pktcSigEndPntConfigEntryPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.2.1.1.32pktcSigEndPntConfigMinHookFlashPKTC-IETF-SIG-MIB