PKTC-IETF-SIG-MIB :: pktcSigDevrpAsDtsDuration

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PKTC-IETF-SIG-MIB › pktcSigDevrpAsDtsDuration

pktcSigDevrpAsDtsDuration

Module: PKTC-IETF-SIG-MIB

OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigDevrpAsDtsDuration

OID (numeric): 1.3.6.1.2.1.169.1.1.41

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies the duration of the rpASDTS ring pulse prior to the start of the transmission of the FSK or DTMF containing the caller id information. It is only used when pktcSigDevCidMode is set to a value of 'rpAsETS'.

The following table defines the default values for this MIB object, depending on the signal type (pktcSigDevCidMode), and MUST be followed:

Value of pktcSigDevCidMode Default value

duringringingETS any value (not used) dtAsETS any value (not used) rpAsETS 250 lrAsETS any value (not used) lrETS any value (not used)

An attempt to set this object while the value of pktcSigDevCidMode is not 'rpAsETS' will result in an 'inconsistentValue' error.

The value of this MIB object MUST NOT persist across MTA reboots.

What is pktcSigDevrpAsDtsDuration?

Sets, in milliseconds (0 or 200-500, default 250), the duration of the ring-pulse alert signal before caller-ID transmission begins; only used when pktcSigDevCidMode is rpAsETS.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.1.41
snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevrpAsDtsDuration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.1.41.1
snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevrpAsDtsDuration.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.169.1.1.41.1 i <value>

Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigDevrpAsDtsDuration OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.169pktcIetfSigMibPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1pktcSigMibObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.1pktcSigDevObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.1.41pktcSigDevrpAsDtsDurationPKTC-IETF-SIG-MIB