All MIBs › PKTC-IETF-SIG-MIB › pktcSigDevVmwiDelayAfterLR
pktcSigDevVmwiDelayAfterLR
Module: PKTC-IETF-SIG-MIB
OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigDevVmwiDelayAfterLR
OID (numeric): 1.3.6.1.2.1.169.1.1.38
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the delay between the end of the Line Reversal and the start of the FSK or DTMF signal. This object is only used when pktcSigDevVmwiMode is set to a value of 'lrETS'. This timing has a range of 300 to 800 ms.
The following table defines the default values for this MIB object, depending on the signal type (pktcSigDevVmwiMode), and MUST be followed:
Value of pktcSigDevVmwiMode Default value
duringringingETS any value (not used) dtAsETS any value (not used) rpAsETS any value (not used) lrAsETS any value (not used) lrETS 400
An attempt to set this object while the value of pktcSigDevVmwiMode is not 'lrETS' will result in an 'inconsistentValue' error.
The value of this MIB object MUST NOT persist across MTA reboots.
What is pktcSigDevVmwiDelayAfterLR?
Sets, in milliseconds (0 or 300-800, default 400), the delay between line reversal and the start of VMWI FSK/DTMF transmission; only used when pktcSigDevVmwiMode is lrETS.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.1.38 snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevVmwiDelayAfterLR
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.1.38.1 snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevVmwiDelayAfterLR.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.169.1.1.38.1 i <value>
Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigDevVmwiDelayAfterLR OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.169 | pktcIetfSigMib | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1 | pktcSigMibObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1 | pktcSigDevObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1.38 | pktcSigDevVmwiDelayAfterLR | PKTC-IETF-SIG-MIB |