All MIBs › PKTC-IETF-SIG-MIB › pktcSigDevVmwiAfterRPAS
pktcSigDevVmwiAfterRPAS
Module: PKTC-IETF-SIG-MIB
OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigDevVmwiAfterRPAS
OID (numeric): 1.3.6.1.2.1.169.1.1.29
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the delay between the end of the Ring Pulse Alert Signal (RP-AS) and the start of the transmission of the FSK or DTMF containing the VMWI information.
This object is only used when pktcSigDevVmwiMode is set to a value of 'rpAsETS'.
The following table defines the default values for this MIB object, depending on the signal type (pktcSigDevVmwiMode), and MUST be followed:
Value of pktcSigDevVmwiMode Default value
dtAsETS any value (not used) rpAsETS 650 ms lrAsETS any value (not used) lrETS any value (not used)
An attempt to set this object while the value of pktcSigDevVmwiMode is not 'rpAsETS' will result in an 'inconsistentValue' error.
The value of this MIB object MUST NOT persist across MTA reboots.
What is pktcSigDevVmwiAfterRPAS?
Sets, in milliseconds (0 or 500-800, default 650), the delay after the Ring Pulse Alert Signal before sending VMWI data; only applicable when pktcSigDevVmwiMode is rpAsETS.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.1.29 snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevVmwiAfterRPAS
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.1.29.1 snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevVmwiAfterRPAS.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.169.1.1.29.1 i <value>
Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigDevVmwiAfterRPAS OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.169 | pktcIetfSigMib | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1 | pktcSigMibObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1 | pktcSigDevObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1.29 | pktcSigDevVmwiAfterRPAS | PKTC-IETF-SIG-MIB |