PKTC-IETF-SIG-MIB :: pktcSigDevVmwiAfterDTAS

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PKTC-IETF-SIG-MIB › pktcSigDevVmwiAfterDTAS

pktcSigDevVmwiAfterDTAS

Module: PKTC-IETF-SIG-MIB

OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigDevVmwiAfterDTAS

OID (numeric): 1.3.6.1.2.1.169.1.1.28

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies the delay between the end of the Dual Tone Alert Signal (DT-AS) and the start of the transmission of the FSK or DTMF containing the VMWI information.

This object is only used when pktcSigDevVmwiMode is set to a value of 'dtAsETS' or 'lrAsETS'.

The following table defines the default values for this MIB object, depending on the signal type (pktcSigDevVmwiMode), and MUST be followed:

Value of pktcSigDevVmwiMode Default value

dtAsETS 50 ms rpAsETS any value (not used) lrAsETS 50 ms lrETS any value (not used)

An attempt to set this object while the value of pktcSigDevVmwiMode is not 'dtAsETS' or 'lrAsETS' will result in an 'inconsistentValue' error.

The value of this MIB object MUST NOT persist across MTA reboots.

What is pktcSigDevVmwiAfterDTAS?

Sets, in milliseconds (0 or 45-500, default 50), the delay after the Dual Tone Alert Signal before sending VMWI data; only applicable when pktcSigDevVmwiMode is dtAsETS or lrAsETS.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.1.28
snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevVmwiAfterDTAS

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.1.28.1
snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevVmwiAfterDTAS.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.169.1.1.28.1 i <value>

Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigDevVmwiAfterDTAS OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.169pktcIetfSigMibPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1pktcSigMibObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.1pktcSigDevObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.1.28pktcSigDevVmwiAfterDTASPKTC-IETF-SIG-MIB