PKTC-IETF-SIG-MIB :: pktcSigDevToneFreqMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PKTC-IETF-SIG-MIB › pktcSigDevToneFreqMode

pktcSigDevToneFreqMode

Module: PKTC-IETF-SIG-MIB

OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigDevToneFreqMode

OID (numeric): 1.3.6.1.2.1.169.1.1.33.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This MIB object provides directive on the modulation or summation of the frequencies involved in the tone.

It is to be noted that while summation can be done without any constraint on the number of frequencies, the modulation (amplitude) holds good only when there are two frequencies (first and second).

Thus: - If the mode is set to a value of 'firstModulatedBySecond(1)', the first frequency MUST be modulated by the second, and the remaining frequencies (third and fourth) ignored. The percentage of amplitude modulation to be applied is defined by the MIB object pktcSigDevToneFreqAmpModePrtg.

- If the mode is set to a value of 'summation(2)', all the frequencies MUST be summed without any modulation.

What is pktcSigDevToneFreqMode?

Read-only indicator of how this tone's frequencies combine: firstModulatedBySecond amplitude-modulates the first frequency by the second (ignoring any third/fourth), or summation simply adds all configured frequencies together.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.1.33.1.6
snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevToneFreqMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.1.33.1.6.1
snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevToneFreqMode.1

Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigDevToneFreqMode OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.169pktcIetfSigMibPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1pktcSigMibObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.1pktcSigDevObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.1.33pktcSigDevMultiFreqToneTablePKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.1.33.1pktcSigDevMultiFreqToneEntryPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.1.33.1.6pktcSigDevToneFreqModePKTC-IETF-SIG-MIB