All MIBs › PKTC-IETF-SIG-MIB › pktcSigDevRingAfterCID
pktcSigDevRingAfterCID
Module: PKTC-IETF-SIG-MIB
OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigDevRingAfterCID
OID (numeric): 1.3.6.1.2.1.169.1.1.25
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the delay between the end of the complete transmission of the FSK or DTMF containing the caller id information and the start of the first ring pattern. It is only used when pktcSigDevCidMode is set to a value of 'dtAsETS', 'rpAsETS', 'lrAsETS' or 'lrETS'.
The following table defines the default values for this MIB object, depending on the signal type (pktcSigDevCidMode), and MUST be followed:
Value of pktcSigDevCidMode Default value
duringringingETS any value (not used) dtAsETS 250 ms rpAsETS 250 ms lrAsETS 250 ms lrETS 250 ms
An attempt to set this object while the value of pktcSigDevCidMode is not 'dtAsETS', 'rpAsETS', 'lrAsETS', or 'lrETS' will result in an 'inconsistent value' error.
The value of this MIB object MUST NOT persist across MTA reboots.
What is pktcSigDevRingAfterCID?
Sets, in milliseconds (0 or 50-500, default 250), the delay after caller-ID data finishes transmitting before the first ring pattern starts; applies to the dtAsETS, rpAsETS, lrAsETS, and lrETS caller-ID modes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.1.25 snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevRingAfterCID
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.1.25.1 snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevRingAfterCID.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.169.1.1.25.1 i <value>
Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigDevRingAfterCID OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.169 | pktcIetfSigMib | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1 | pktcSigMibObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1 | pktcSigDevObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1.25 | pktcSigDevRingAfterCID | PKTC-IETF-SIG-MIB |