All MIBs › PKTC-IETF-SIG-MIB › pktcSigDevCidDelayAfterLR
pktcSigDevCidDelayAfterLR
Module: PKTC-IETF-SIG-MIB
OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigDevCidDelayAfterLR
OID (numeric): 1.3.6.1.2.1.169.1.1.34
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the delay between the end of the Line Reversal and the start of the FSK or DTMF signal. This MIB object is used only when pktcSigDevCidMode is set to a value of 'lrETS'. This timing has a range of 300 to 800 ms.
The following table defines the default values for this MIB object, depending on the signal type (pktcSigDevCidMode), and MUST be followed:
Value of pktcSigDevCidMode Default value
duringringingETS any value (not used) dtAsETS any value (not used) rpAsETS any value (not used) lrAsETS any value (not used) lrETS 400
An attempt to set this object while the value of pktcSigDevCidMode is not set to a value of 'lrETS' will result in an 'inconsistentValue' error.
The value of this MIB object MUST NOT persist across MTA reboots.
What is pktcSigDevCidDelayAfterLR?
Sets, in milliseconds (300-800, default 400), the delay between line reversal and the start of caller-ID FSK/DTMF transmission; only used when pktcSigDevCidMode is lrETS.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.1.34 snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevCidDelayAfterLR
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.1.34.1 snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevCidDelayAfterLR.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.169.1.1.34.1 i <value>
Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigDevCidDelayAfterLR OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.169 | pktcIetfSigMib | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1 | pktcSigMibObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1 | pktcSigDevObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1.34 | pktcSigDevCidDelayAfterLR | PKTC-IETF-SIG-MIB |