PKTC-IETF-SIG-MIB :: pktcSigDevCidDTASAfterLR

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PKTC-IETF-SIG-MIB › pktcSigDevCidDTASAfterLR

pktcSigDevCidDTASAfterLR

Module: PKTC-IETF-SIG-MIB

OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigDevCidDTASAfterLR

OID (numeric): 1.3.6.1.2.1.169.1.1.26

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies the delay between the end of the Line Reversal and the start of the Dual Tone Alert Signal (DT-AS). This object is only used when pktcSigDevCidMode is set to a value of 'lrAsETS'.

The following table defines the default values for this MIB object, depending on the signal type (pktcSigDevCidMode), and MUST be followed:

Value of pktcSigDevCidMode Default value

duringringingETS any value (not used) dtAsETS any value (not used) rpAsETS any value (not used) lrAsETS 250 ms lrETS any value (not used)

An attempt to set this object while the value of pktcSigDevCidMode is not lrAsETS will result in an 'inconsistentValue' error.

The value of this MIB object MUST NOT persist across MTA reboots.

What is pktcSigDevCidDTASAfterLR?

Sets, in milliseconds (50-655, default 250), the delay between line reversal and the Dual Tone Alert Signal for caller-ID delivery; only used when pktcSigDevCidMode is lrAsETS.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.1.26
snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevCidDTASAfterLR

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.1.26.1
snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevCidDTASAfterLR.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.169.1.1.26.1 i <value>

Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigDevCidDTASAfterLR OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.169pktcIetfSigMibPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1pktcSigMibObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.1pktcSigDevObjectsPKTC-IETF-SIG-MIB
1.3.6.1.2.1.169.1.1.26pktcSigDevCidDTASAfterLRPKTC-IETF-SIG-MIB