All MIBs › PKTC-IETF-SIG-MIB › pktcSigDevCidAfterRing
pktcSigDevCidAfterRing
Module: PKTC-IETF-SIG-MIB
OID (symbolic): PKTC-IETF-SIG-MIB::pktcSigDevCidAfterRing
OID (numeric): 1.3.6.1.2.1.169.1.1.22
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the delay between the end of first ringing pattern and the start of the transmission of the FSK or DTMF containing the caller id information. It is only used when pktcSigDevCidMode is set to a value of 'duringRingingETS'.
The following table defines the default values for this MIB object, depending on the signal type
(pktcSigDevCidMode), and MUST be followed:
Value of pktcSigDevCidMode Default value
duringringingETS 550 ms dtAsETS any value (not used) rpAsETS any value (not used) lrAsETS any value (not used) lrETS any value (not used)
An attempt to set this object while the value of pktcSigDevCidMode is not duringringingETS will result in an 'inconsistentValue' error.
The value of this MIB object MUST NOT persist across MTA reboots.
What is pktcSigDevCidAfterRing?
Sets, in milliseconds (0 or 50-2000, default 550), the delay after the first ring pattern before sending caller-ID data; only meaningful when pktcSigDevCidMode is set to duringRingingETS, otherwise setting it triggers an error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.169.1.1.22 snmpwalk -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevCidAfterRing
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.169.1.1.22.1 snmpget -v2c -c public <target> PKTC-IETF-SIG-MIB::pktcSigDevCidAfterRing.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.169.1.1.22.1 i <value>
Start monitoring PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-SIG-MIB::pktcSigDevCidAfterRing OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom-compliant cable-telephony equipment (Network Call Signaling) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.169 | pktcIetfSigMib | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1 | pktcSigMibObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1 | pktcSigDevObjects | PKTC-IETF-SIG-MIB |
| 1.3.6.1.2.1.169.1.1.22 | pktcSigDevCidAfterRing | PKTC-IETF-SIG-MIB |