PKTC-IETF-EVENT-MIB :: pktcEventThrottleAdminStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PKTC-IETF-EVENT-MIB › pktcEventThrottleAdminStatus

pktcEventThrottleAdminStatus

Module: PKTC-IETF-EVENT-MIB

OID (symbolic): PKTC-IETF-EVENT-MIB::pktcEventThrottleAdminStatus

OID (numeric): 1.3.6.1.2.1.182.1.2.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This MIB object controls the throttling of the transmitted messages upon generation of an event (SNMP/syslog). It does not affect local logging of events.

A value of unconstrained(1) causes event messages

to be transmitted without regard to the threshold settings.

A value of maintainBelowThreshold(2) causes event messages to be suppressed if the number of transmissions would otherwise exceed the threshold specified by pktcEventThrottleThreshold over the interval specified by pktcEventThrottleInterval.

A value of stopAtThreshold(3) causes event message transmission to cease once the threshold specified by pktcEventThrottleThreshold (over the interval specified by pktcEventThrottleInterval) is reached. Event generation is resumed when the value of this MIB object is modified by a management station or when the device resets or reboots.

A value of inhibited(4) causes all event message transmissions to be suppressed.

An event causing both an SNMP and a syslog message is still treated as a single event.

Refer to MIB objects pktcEventThrottleThreshold and pktcEventThrottleInterval for information on throttling.

What is pktcEventThrottleAdminStatus?

Controls how the MTA throttles outgoing event messages (SNMP/syslog only, not local logging): unconstrained sends everything, maintainBelowThreshold suppresses transmissions that would exceed the configured rate, stopAtThreshold halts transmission entirely once the threshold is hit (until reconfigured or the device reboots), and inhibited blocks all event transmission.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.182.1.2.1
snmpwalk -v2c -c public <target> PKTC-IETF-EVENT-MIB::pktcEventThrottleAdminStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.182.1.2.1.1
snmpget -v2c -c public <target> PKTC-IETF-EVENT-MIB::pktcEventThrottleAdminStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.182.1.2.1.1 i <value>

Start monitoring PacketCable/IPCablecom Multimedia Terminal Adapter (MTA), cable VoIP eMTA device (event/logging) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PKTC-IETF-EVENT-MIB::pktcEventThrottleAdminStatus OID value, configure state conditions and alerts, and monitor any PacketCable/IPCablecom Multimedia Terminal Adapter (MTA), cable VoIP eMTA device (event/logging) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.182pktcIetfEventMibPKTC-IETF-EVENT-MIB
1.3.6.1.2.1.182.1pktcEventMibObjectsPKTC-IETF-EVENT-MIB
1.3.6.1.2.1.182.1.2pktcEventThrottlePKTC-IETF-EVENT-MIB
1.3.6.1.2.1.182.1.2.1pktcEventThrottleAdminStatusPKTC-IETF-EVENT-MIB