PEA-TEST-IPDSLAM :: seltNoiseFeAct

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PEA-TEST-IPDSLAM › seltNoiseFeAct

seltNoiseFeAct

Module: PEA-TEST-IPDSLAM

OID (symbolic): PEA-TEST-IPDSLAM::seltNoiseFeAct

OID (numeric): 1.3.6.1.4.1.193.72.300.20.1.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Value that indicates if Far-end noise should be measured or pre-selected. If the noise should be measured this should be Activated(1). If the noise should be pre-selected seltNoiseFeAct should be set to Deactivated(0).

What is seltNoiseFeAct?

Tells the SELT whether to actually measure far-end noise on the line (activated) or use a pre-selected/assumed value instead (deactivated); measuring takes longer but gives a real reading instead of an estimate.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.20.1.1.1.2
snmpwalk -v2c -c public <target> PEA-TEST-IPDSLAM::seltNoiseFeAct

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.20.1.1.1.2.1
snmpget -v2c -c public <target> PEA-TEST-IPDSLAM::seltNoiseFeAct.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.193.72.300.20.1.1.1.2.1 i <value>

Start monitoring Ericsson (Diax) IP-DSLAM broadband access equipment (SELT/noise test control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-TEST-IPDSLAM::seltNoiseFeAct OID value, configure state conditions and alerts, and monitor any Ericsson (Diax) IP-DSLAM broadband access equipment (SELT/noise test control) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.193ericssonANS-COMMON-MIB
1.3.6.1.4.1.193.72diaxMIBDXD-SMI
1.3.6.1.4.1.193.72.300peaIpDslamDIESEL-SMI
Numeric OIDNameModule
1.3.6.1.4.1.193.72.300.20peaTestIpDslamPEA-TEST-IPDSLAM
1.3.6.1.4.1.193.72.300.20.1peaTestIpDslamObjectsPEA-TEST-IPDSLAM
1.3.6.1.4.1.193.72.300.20.1.1seltTestInputTablePEA-TEST-IPDSLAM
1.3.6.1.4.1.193.72.300.20.1.1.1seltTestInputEntryPEA-TEST-IPDSLAM
1.3.6.1.4.1.193.72.300.20.1.1.1.2seltNoiseFeActPEA-TEST-IPDSLAM