All MIBs › PEA-TEST-IPDSLAM › seltBitLoadingEstFe1
seltBitLoadingEstFe1
Module: PEA-TEST-IPDSLAM
OID (symbolic): PEA-TEST-IPDSLAM::seltBitLoadingEstFe1
OID (numeric): 1.3.6.1.4.1.193.72.300.20.1.4.1.28
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: Estimate of the maximum attainable load of bits per tone in Downstream band. Part 0. Consecutive values are spaced 4.3125 kHz in frequency. If seltAdvOutputTableAct is deactivated the values should be ignored.
What is seltBitLoadingEstFe1?
Segment 1 of a 4-part 128-byte array holding the estimated maximum bit-loading (bits per tone the line could carry) in the downstream band, measured by the SELT (single-ended line test); consecutive bit-loading estimates in the array are spaced 4.3125 kHz apart in frequency (the source MIB's DESCRIPTION text for this object literally says "Part 0", copy-pasted from the first segment -- based on the object's own name/position this is actually part 1 of 4). Concatenate all seltBitLoadingEstFe0 through seltBitLoadingEstFe3 in order to reconstruct the full per-tone curve, and ignore the values entirely if seltAdvOutputTableAct is deactivated.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.20.1.4.1.28 snmpwalk -v2c -c public <target> PEA-TEST-IPDSLAM::seltBitLoadingEstFe1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.20.1.4.1.28.1 snmpget -v2c -c public <target> PEA-TEST-IPDSLAM::seltBitLoadingEstFe1.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> seltBitLoadingEstFe1.1
Start monitoring Ericsson (Diax) IP-DSLAM broadband access equipment (SELT/noise test control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-TEST-IPDSLAM::seltBitLoadingEstFe1 OID value, configure state conditions and alerts, and monitor any Ericsson (Diax) IP-DSLAM broadband access equipment (SELT/noise test control) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.20 | peaTestIpDslam | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1 | peaTestIpDslamObjects | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1.4 | seltTestAdvOutputTable | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1.4.1 | seltTestAdvOutputEntry | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1.4.1.28 | seltBitLoadingEstFe1 | PEA-TEST-IPDSLAM |