All MIBs › PEA-TEST-IPDSLAM › loopDiagStatus
loopDiagStatus
Module: PEA-TEST-IPDSLAM
OID (symbolic): PEA-TEST-IPDSLAM::loopDiagStatus
OID (numeric): 1.3.6.1.4.1.193.72.300.20.1.23.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Status of current Loop Diagnostics. NOTE that Loop Diagnostics data are only valid in case of status LoopDiagSuccess.
What is loopDiagStatus?
The current state of the G.997.1 loop diagnostics run: not started, in progress, measurement OK, success, or failed; the rest of the loopDiag* results should only be trusted once this reads success -- anything else means the data isn't complete or valid yet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.72.300.20.1.23.1.1 snmpwalk -v2c -c public <target> PEA-TEST-IPDSLAM::loopDiagStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.72.300.20.1.23.1.1.1 snmpget -v2c -c public <target> PEA-TEST-IPDSLAM::loopDiagStatus.1
Start monitoring Ericsson (Diax) IP-DSLAM broadband access equipment (SELT/noise test control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEA-TEST-IPDSLAM::loopDiagStatus OID value, configure state conditions and alerts, and monitor any Ericsson (Diax) IP-DSLAM broadband access equipment (SELT/noise test control) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.72 | diaxMIB | DXD-SMI |
| 1.3.6.1.4.1.193.72.300 | peaIpDslam | DIESEL-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.72.300.20 | peaTestIpDslam | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1 | peaTestIpDslamObjects | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1.23 | loopDiagResultTable | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1.23.1 | loopDiagResultEntry | PEA-TEST-IPDSLAM |
| 1.3.6.1.4.1.193.72.300.20.1.23.1.1 | loopDiagStatus | PEA-TEST-IPDSLAM |